Hi Martin,
Thanks for the patch. One comment below.
On Tuesday 18 January 2011 22:27:42 Martin Hostettler wrote:
> Adds support for V4L2_MBUS_FMT_Y8_1X8 format and 8bit data width in
> synchronous interface.
>
> When in 8bit mode don't apply DC substraction of 64 per default as this
> would remove 1/4 of the sensor range.
>
> When using V4L2_MBUS_FMT_Y8_1X8 (or possibly another 8bit per pixel) mode
> set the CDCC to output 8bit per pixel instead of 16bit.
>
> Signed-off-by: Martin Hostettler <mar...@neutronstar.dyndns.org>
> ---
> drivers/media/video/isp/ispccdc.c | 22 ++++++++++++++++++----
> drivers/media/video/isp/ispvideo.c | 2 ++
> 2 files changed, 20 insertions(+), 4 deletions(-)
>
> Changes since first version:
> - forward ported to current media.git
>
> diff --git a/drivers/media/video/isp/ispccdc.c
> b/drivers/media/video/isp/ispccdc.c index 578c8bf..c7397c9 100644
> --- a/drivers/media/video/isp/ispccdc.c
> +++ b/drivers/media/video/isp/ispccdc.c
> @@ -43,6 +43,7 @@ __ccdc_get_format(struct isp_ccdc_device *ccdc, struct
> v4l2_subdev_fh *fh, unsigned int pad, enum v4l2_subdev_format_whence
> which);
>
> static const unsigned int ccdc_fmts[] = {
> + V4L2_MBUS_FMT_Y8_1X8,
> V4L2_MBUS_FMT_SGRBG10_1X10,
> V4L2_MBUS_FMT_SRGGB10_1X10,
> V4L2_MBUS_FMT_SBGGR10_1X10,
> @@ -1127,6 +1128,9 @@ static void ccdc_configure(struct isp_ccdc_device
> *ccdc) ccdc->syncif.datsz = pdata ? pdata->width : 10;
> ispccdc_config_sync_if(ccdc, &ccdc->syncif);
>
> + /* CCDC_PAD_SINK */
> + format = &ccdc->formats[CCDC_PAD_SINK];
> +
> syn_mode = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE);
>
> /* Use the raw, unprocessed data when writing to memory. The H3A and
> @@ -1144,10 +1148,15 @@ static void ccdc_configure(struct isp_ccdc_device
> *ccdc) else
> syn_mode &= ~ISPCCDC_SYN_MODE_SDR2RSZ;
>
> - isp_reg_writel(isp, syn_mode, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE);
> + /* Use PACK8 mode for 1byte per pixel formats */
>
> - /* CCDC_PAD_SINK */
> - format = &ccdc->formats[CCDC_PAD_SINK];
> + if (isp_video_format_info(format->code)->bpp <= 8)
> + syn_mode |= ISPCCDC_SYN_MODE_PACK8;
> + else
> + syn_mode &= ~ISPCCDC_SYN_MODE_PACK8;
> +
> +
> + isp_reg_writel(isp, syn_mode, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE);
>
> /* Mosaic filter */
> switch (format->code) {
> @@ -2244,7 +2253,12 @@ int isp_ccdc_init(struct isp_device *isp)
> ccdc->syncif.vdpol = 0;
>
> ccdc->clamp.oblen = 0;
> - ccdc->clamp.dcsubval = 64;
> +
> + if (isp->pdata->subdevs->interface == ISP_INTERFACE_PARALLEL
> + && isp->pdata->subdevs->bus.parallel.width <= 8)
> + ccdc->clamp.dcsubval = 0;
> + else
> + ccdc->clamp.dcsubval = 64;
I don't like this too much. What happens if you have several sensors connected
to the system with different bus width ?
> ccdc->vpcfg.pixelclk = 0;
>
> diff --git a/drivers/media/video/isp/ispvideo.c
> b/drivers/media/video/isp/ispvideo.c index 5f984e4..cd3d331 100644
> --- a/drivers/media/video/isp/ispvideo.c
> +++ b/drivers/media/video/isp/ispvideo.c
> @@ -221,6 +221,8 @@ isp_video_check_format(struct isp_video *video, struct
> isp_video_fh *vfh) }
>
> static struct isp_format_info formats[] = {
> + { V4L2_MBUS_FMT_Y8_1X8, V4L2_MBUS_FMT_Y8_1X8,
> + V4L2_MBUS_FMT_Y8_1X8, V4L2_PIX_FMT_GREY, 8, },
> { V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8, V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8,
> V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_PIX_FMT_SGRBG10DPCM8, 8, },
> { V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_MBUS_FMT_SBGGR10_1X10,
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
