Sarah Sharp <sarah.a.sh...@linux.intel.com> wrote:
>Hi Laurent,
>
>I think this issue has been happening for a while now, but my recent
>patches to remove most of the xHCI debugging
have finally allowed me to
>use a webcam under xHCI with debugging on. Unfortunately, it doesn't
>work very well.
>
>When I plug in a webcam under an xHCI host controller in 3.0-rc3+
>(basically top of Greg's usb-linus branch) with xHCI debugging turned
>on, the host controller occasionally cannot keep up with the
>isochronous
>transfers, and it tells the xHCI driver that it had to "skip" several
>microframes of transfers. These "Missed Service Intervals" aren't
>supposed to be fatal errors, just an indication that something was
>hogging the PCI memory bandwidth.
>
>The xHCI driver then sets the URB's status to -EXDEV, to indicate that
>some of the iso_frame_desc transferred, and sets at least one frame's
>status to -EXDEV:
>
>static int skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
> struct xhci_transfer_event *event,
> struct xhci_virt_ep *ep, int *status)
>{
> struct xhci_ring *ep_ring;
> struct urb_priv *urb_priv;
> struct usb_iso_packet_descriptor *frame;
> int idx;
>
> ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
> urb_priv = td->urb->hcpriv;
> idx = urb_priv->td_cnt;
> frame = &td->urb->iso_frame_desc[idx];
>
> /* The transfer is partly done */
> *status = -EXDEV;
> frame->status = -EXDEV;
>
> /* calc actual length */
> frame->actual_length = 0;
>
> /* Update ring dequeue pointer */
> while (ep_ring->dequeue != td->last_trb)
> inc_deq(xhci, ep_ring, false);
> inc_deq(xhci, ep_ring, false);
>
> return finish_td(xhci, td, NULL, event, ep, status, true);
>}
>
>The urb->status causes uvcvideo code in
>uvc_status.c:uvc_status_complete() to
>fail with the message:
>
>Jun 15 17:37:11 talon kernel: [ 117.987769] uvcvideo: Non-zero status
>(-18) in video completion handler.
>
>It doesn't resubmit the isochronous URB in that case, and the userspace
>video freezes. If I restart the application, the video comes back
>until
>the next Missed Service Interval event from the xHCI driver. Ideally,
>the video driver would just resubmit the URB, and the xHCI host
>controller would complete transfers as best it can. I think the frames
>with -EXDEV status should be treated like short transfers.
>
>I've grepped through drivers/media/video, and it seems like none of the
>drivers handle the -EXDEV status. What should the xHCI driver be
>setting the URB's status and frame status to when the xHCI host
>controller skips over transfers? -EREMOTEIO?
>
>Or does it need to set the URB's status to zero, but only set the
>individual frame status to -EXDEV?
>
>Sarah Sharp
>--
>To unsubscribe from this list: send the line "unsubscribe linux-media"
>in
>the body of a message to majord...@vger.kernel.org
>More majordomo info at http://vger.kernel.org/majordomo-info.html
Video drivers don't handle EXDEV probably because it is an error code about
filesystem links:
http://pubs.opengroup.org/onlinepubs/009695399/functions/xsh_chap02_03.html#tag_02_03
Regards,
Andy
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
