This patch adds the ability to get arbitrary resolutions with a width
up to 2592 and a height up to 720 pixels instead of the standard 1280x720
only.

Signed-off-by: Bastian Hecht <hec...@gmail.com>
---

diff --git a/drivers/media/video/ov5642.c b/drivers/media/video/ov5642.c
index 6410bda..1b40d90 100644
--- a/drivers/media/video/ov5642.c
+++ b/drivers/media/video/ov5642.c
@@ -14,8 +14,10 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/bitops.h>
 #include <linux/delay.h>
 #include <linux/i2c.h>
+#include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/videodev2.h>
 
@@ -28,13 +30,25 @@
 #define REG_CHIP_ID_HIGH               0x300a
 #define REG_CHIP_ID_LOW                        0x300b
 
+#define REG_RED_GAIN_HIGH              0x3400
+#define REG_RED_GAIN_LOW               0x3401
+#define REG_BLUE_GAIN_HIGH             0x3404
+#define REG_BLUE_GAIN_LOW              0x3405
+#define REG_AWB_MANUAL                 0x3406
+#define REG_EXP_HIGH                   0x3500
+#define REG_EXP_MIDDLE                 0x3501
+#define REG_EXP_LOW                    0x3502
+#define REG_EXP_GAIN_CTRL              0x3503
+#define REG_GAIN                       0x350b
+#define REG_EXTEND_FRAME_TIME_HIGH     0x350c
+#define REG_EXTEND_FRAME_TIME_LOW      0x350d
 #define REG_WINDOW_START_X_HIGH                0x3800
 #define REG_WINDOW_START_X_LOW         0x3801
 #define REG_WINDOW_START_Y_HIGH                0x3802
 #define REG_WINDOW_START_Y_LOW         0x3803
 #define REG_WINDOW_WIDTH_HIGH          0x3804
 #define REG_WINDOW_WIDTH_LOW           0x3805
-#define REG_WINDOW_HEIGHT_HIGH                 0x3806
+#define REG_WINDOW_HEIGHT_HIGH         0x3806
 #define REG_WINDOW_HEIGHT_LOW          0x3807
 #define REG_OUT_WIDTH_HIGH             0x3808
 #define REG_OUT_WIDTH_LOW              0x3809
@@ -44,19 +58,56 @@
 #define REG_OUT_TOTAL_WIDTH_LOW                0x380d
 #define REG_OUT_TOTAL_HEIGHT_HIGH      0x380e
 #define REG_OUT_TOTAL_HEIGHT_LOW       0x380f
+#define REG_FLIP_SUBSAMPLE             0x3818
+#define REG_OUTPUT_FORMAT              0x4300
+#define REG_ISP_CTRL_01                        0x5001
+#define REG_DIGITAL_EFFECTS            0x5580
+#define REG_HUE_COS                    0x5581
+#define REG_HUE_SIN                    0x5582
+#define REG_BLUE_SATURATION            0x5583
+#define REG_RED_SATURATION             0x5584
+#define REG_CONTRAST                   0x5588
+#define REG_BRIGHTNESS                 0x5589
+#define REG_D_E_AUXILLARY              0x558a
+#define REG_AVG_WINDOW_END_X_HIGH      0x5682
+#define REG_AVG_WINDOW_END_X_LOW       0x5683
+#define REG_AVG_WINDOW_END_Y_HIGH      0x5686
+#define REG_AVG_WINDOW_END_Y_LOW       0x5687
+
+/* active pixel array size */
+#define OV5642_SENSOR_SIZE_X   2592
+#define OV5642_SENSOR_SIZE_Y   1944
+
+/* current maximum working size */
+#define OV5642_MAX_WIDTH       OV5642_SENSOR_SIZE_X
+#define OV5642_MAX_HEIGHT      720
+
+/* default sizes */
+#define OV5642_DEFAULT_WIDTH   1280
+#define OV5642_DEFAULT_HEIGHT  OV5642_MAX_HEIGHT
+
+/* minimum extra blanking */
+#define BLANKING_EXTRA_WIDTH           500
+#define BLANKING_EXTRA_HEIGHT          20
 
 /*
- * define standard resolution.
- * Works currently only for up to 720 lines
- * eg. 320x240, 640x480, 800x600, 1280x720, 2048x720
+ * the sensor's autoexposure is buggy when setting total_height low.
+ * It tries to expose longer than 1 frame period without taking care of it
+ * and this leads to weird output. So we set 1000 lines as minimum.
  */
 
-#define OV5642_WIDTH           1280
-#define OV5642_HEIGHT          720
-#define OV5642_TOTAL_WIDTH     3200
-#define OV5642_TOTAL_HEIGHT    2000
-#define OV5642_SENSOR_SIZE_X   2592
-#define OV5642_SENSOR_SIZE_Y   1944
+#define BLANKING_MIN_HEIGHT            1000
+
+/*
+ * About OV5642 resolution, cropping and binning:
+ * This sensor supports it all, at least in the feature description.
+ * Unfortunately, no combination of appropriate registers settings could make
+ * the chip work the intended way. As it works with predefined register lists,
+ * some undocumented registers are presumably changed there to achieve their
+ * goals.
+ * This driver currently only works for resolutions up to 720 lines with a
+ * 1:1 scale. Hopefully these restrictions will be removed in the future.
+ */
 
 struct regval_list {
        u16 reg_num;
@@ -105,10 +156,8 @@ static struct regval_list ov5642_default_regs_init[] = {
        { 0x471d, 0x5  },
        { 0x4708, 0x6  },
        { 0x370c, 0xa0 },
-       { 0x5687, 0x94 },
        { 0x501f, 0x0  },
        { 0x5000, 0x4f },
-       { 0x5001, 0xcf },
        { 0x4300, 0x30 },
        { 0x4300, 0x30 },
        { 0x460b, 0x35 },
@@ -121,11 +170,8 @@ static struct regval_list ov5642_default_regs_init[] = {
        { 0x4402, 0x90 },
        { 0x460c, 0x22 },
        { 0x3815, 0x44 },
-       { 0x3503, 0x7  },
        { 0x3501, 0x73 },
        { 0x3502, 0x80 },
-       { 0x350b, 0x0  },
-       { 0x3818, 0xc8 },
        { 0x3824, 0x11 },
        { 0x3a00, 0x78 },
        { 0x3a1a, 0x4  },
@@ -140,12 +186,6 @@ static struct regval_list ov5642_default_regs_init[] = {
        { 0x350d, 0xd0 },
        { 0x3a0d, 0x8  },
        { 0x3a0e, 0x6  },
-       { 0x3500, 0x0  },
-       { 0x3501, 0x0  },
-       { 0x3502, 0x0  },
-       { 0x350a, 0x0  },
-       { 0x350b, 0x0  },
-       { 0x3503, 0x0  },
        { 0x3a0f, 0x3c },
        { 0x3a10, 0x32 },
        { 0x3a1b, 0x3c },
@@ -298,7 +338,7 @@ static struct regval_list ov5642_default_regs_init[] = {
        { 0x54b7, 0xdf },
        { 0x5402, 0x3f },
        { 0x5403, 0x0  },
-       { 0x3406, 0x0  },
+       { REG_AWB_MANUAL, 0x0  },
        { 0x5180, 0xff },
        { 0x5181, 0x52 },
        { 0x5182, 0x11 },
@@ -515,7 +555,6 @@ static struct regval_list ov5642_default_regs_init[] = {
        { 0x5088, 0x0  },
        { 0x5089, 0x0  },
        { 0x302b, 0x0  },
-       { 0x3503, 0x7  },
        { 0x3011, 0x8  },
        { 0x350c, 0x2  },
        { 0x350d, 0xe4 },
@@ -526,7 +565,6 @@ static struct regval_list ov5642_default_regs_init[] = {
 
 static struct regval_list ov5642_default_regs_finalise[] = {
        { 0x3810, 0xc2 },
-       { 0x3818, 0xc9 },
        { 0x381c, 0x10 },
        { 0x381d, 0xa0 },
        { 0x381e, 0x5  },
@@ -541,23 +579,20 @@ static struct regval_list ov5642_default_regs_finalise[] 
= {
        { 0x3a0d, 0x2  },
        { 0x3a0e, 0x1  },
        { 0x401c, 0x4  },
-       { 0x5682, 0x5  },
-       { 0x5683, 0x0  },
-       { 0x5686, 0x2  },
-       { 0x5687, 0xcc },
-       { 0x5001, 0x4f },
+       { REG_ISP_CTRL_01, 0xff },
+       { REG_DIGITAL_EFFECTS, 0x6 },
        { 0x589b, 0x6  },
        { 0x589a, 0xc5 },
-       { 0x3503, 0x0  },
+       { REG_EXP_GAIN_CTRL, 0x0  },
        { 0x460c, 0x20 },
        { 0x460b, 0x37 },
        { 0x471c, 0xd0 },
        { 0x471d, 0x5  },
        { 0x3815, 0x1  },
-       { 0x3818, 0xc1 },
+       { REG_FLIP_SUBSAMPLE, 0xc1 },
        { 0x501f, 0x0  },
        { 0x5002, 0xe0 },
-       { 0x4300, 0x32 }, /* UYVY */
+       { REG_OUTPUT_FORMAT, 0x32 },
        { 0x3002, 0x1c },
        { 0x4800, 0x14 },
        { 0x4801, 0xf  },
@@ -578,9 +613,20 @@ struct ov5642_datafmt {
        enum v4l2_colorspace            colorspace;
 };
 
+/* the output resolution and blanking information */
+struct ov5642_out_size {
+       int width;
+       int height;
+       int total_width;
+       int total_height;
+};
+
 struct ov5642 {
        struct v4l2_subdev              subdev;
+
        const struct ov5642_datafmt     *fmt;
+       struct v4l2_rect                crop_rect;
+       struct ov5642_out_size          out_size;
 };
 
 static const struct ov5642_datafmt ov5642_colour_fmts[] = {
@@ -593,8 +639,7 @@ static struct ov5642 *to_ov5642(const struct i2c_client 
*client)
 }
 
 /* Find a data format by a pixel code in an array */
-static const struct ov5642_datafmt
-                       *ov5642_find_datafmt(enum v4l2_mbus_pixelcode code)
+static const struct ov5642_datafmt *ov5642_find_datafmt(enum 
v4l2_mbus_pixelcode code)
 {
        int i;
 
@@ -641,6 +686,26 @@ static int reg_write(struct i2c_client *client, u16 reg, 
u8 val)
 
        return 0;
 }
+
+/*
+ * convenience function to write 16 bit register values that are split up
+ * into two consecutive high and low parts
+ */
+static int reg_write16(struct i2c_client *client, u16 reg, u16 val16)
+{
+       int ret;
+       u8 val8;
+
+       val8 = val16 >> 8;
+       ret = reg_write(client, reg, val8);
+       if (ret)
+               return ret;
+       val8 = val16 & 0x00ff;
+       ret = reg_write(client, reg + 1, val8);
+
+       return ret;
+}
+
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 static int ov5642_get_register(struct v4l2_subdev *sd, struct 
v4l2_dbg_register *reg)
 {
@@ -684,68 +749,72 @@ static int ov5642_write_array(struct i2c_client *client,
        return 0;
 }
 
-static int ov5642_set_resolution(struct i2c_client *client)
+static int ov5642_set_resolution(struct v4l2_subdev *sd)
 {
+       struct i2c_client *client = v4l2_get_subdevdata(sd);
+       struct ov5642 *priv = to_ov5642(client);
+       int width = priv->out_size.width;
+       int height = priv->out_size.height;
+       int total_width = priv->out_size.total_width;
+       int total_height = priv->out_size.total_height;
+       int start_x = (OV5642_SENSOR_SIZE_X - width) / 2;
+       int start_y = (OV5642_SENSOR_SIZE_Y - height) / 2;
        int ret;
-       u8 start_x_high = ((OV5642_SENSOR_SIZE_X - OV5642_WIDTH) / 2) >> 8;
-       u8 start_x_low  = ((OV5642_SENSOR_SIZE_X - OV5642_WIDTH) / 2) & 0xff;
-       u8 start_y_high = ((OV5642_SENSOR_SIZE_Y - OV5642_HEIGHT) / 2) >> 8;
-       u8 start_y_low  = ((OV5642_SENSOR_SIZE_Y - OV5642_HEIGHT) / 2) & 0xff;
-
-       u8 width_high   = OV5642_WIDTH  >> 8;
-       u8 width_low    = OV5642_WIDTH  & 0xff;
-       u8 height_high  = OV5642_HEIGHT >> 8;
-       u8 height_low   = OV5642_HEIGHT & 0xff;
-
-       u8 total_width_high  = OV5642_TOTAL_WIDTH  >> 8;
-       u8 total_width_low   = OV5642_TOTAL_WIDTH  & 0xff;
-       u8 total_height_high = OV5642_TOTAL_HEIGHT >> 8;
-       u8 total_height_low  = OV5642_TOTAL_HEIGHT & 0xff;
-
-       ret = reg_write(client, REG_WINDOW_START_X_HIGH, start_x_high);
-       if (!ret)
-               ret = reg_write(client, REG_WINDOW_START_X_LOW, start_x_low);
-       if (!ret)
-               ret = reg_write(client, REG_WINDOW_START_Y_HIGH, start_y_high);
-       if (!ret)
-               ret = reg_write(client, REG_WINDOW_START_Y_LOW, start_y_low);
 
+       /* This should set the starting point for cropping. Doesn't work so 
far. */
+       ret = reg_write16(client, REG_WINDOW_START_X_HIGH, start_x);
        if (!ret)
-               ret = reg_write(client, REG_WINDOW_WIDTH_HIGH, width_high);
-       if (!ret)
-               ret = reg_write(client, REG_WINDOW_WIDTH_LOW , width_low);
+               ret = reg_write16(client, REG_WINDOW_START_Y_HIGH, start_y);
+       if (!ret) {
+               priv->crop_rect.left = start_x;
+               priv->crop_rect.top = start_y;
+       }
+
        if (!ret)
-               ret = reg_write(client, REG_WINDOW_HEIGHT_HIGH, height_high);
+               ret = reg_write16(client, REG_WINDOW_WIDTH_HIGH, width);
        if (!ret)
-               ret = reg_write(client, REG_WINDOW_HEIGHT_LOW,  height_low);
+               ret = reg_write16(client, REG_WINDOW_HEIGHT_HIGH, height);
+       if (ret)
+               return ret;
+       priv->crop_rect.width = width;
+       priv->crop_rect.height = height;
 
+       /* Set the output window size. Only 1:1 scale is supported so far. */
+       ret = reg_write16(client, REG_OUT_WIDTH_HIGH, width);
        if (!ret)
-               ret = reg_write(client, REG_OUT_WIDTH_HIGH, width_high);
-       if (!ret)
-               ret = reg_write(client, REG_OUT_WIDTH_LOW , width_low);
+               ret = reg_write16(client, REG_OUT_HEIGHT_HIGH, height);
+
+       /* Total width = output size + blanking */
        if (!ret)
-               ret = reg_write(client, REG_OUT_HEIGHT_HIGH, height_high);
+               ret = reg_write16(client, REG_OUT_TOTAL_WIDTH_HIGH, 
total_width);
        if (!ret)
-               ret = reg_write(client, REG_OUT_HEIGHT_LOW,  height_low);
+               ret = reg_write16(client, REG_OUT_TOTAL_HEIGHT_HIGH, 
total_height);
 
+       /* set the maximum integration time */
        if (!ret)
-               ret = reg_write(client, REG_OUT_TOTAL_WIDTH_HIGH, 
total_width_high);
-       if (!ret)
-               ret = reg_write(client, REG_OUT_TOTAL_WIDTH_LOW, 
total_width_low);
+               ret = reg_write16(client, REG_EXTEND_FRAME_TIME_HIGH,
+                                                               total_height);
+
+       /* Sets the window for AWB calculations */
        if (!ret)
-               ret = reg_write(client, REG_OUT_TOTAL_HEIGHT_HIGH, 
total_height_high);
+               ret = reg_write16(client, REG_AVG_WINDOW_END_X_HIGH, width);
        if (!ret)
-               ret = reg_write(client, REG_OUT_TOTAL_HEIGHT_LOW,  
total_height_low);
+               ret = reg_write16(client, REG_AVG_WINDOW_END_Y_HIGH, height);
 
        return ret;
 }
 
-static int ov5642_try_fmt(struct v4l2_subdev *sd,
-                         struct v4l2_mbus_framefmt *mf)
+static int ov5642_try_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt 
*mf)
 {
-       const struct ov5642_datafmt *fmt = ov5642_find_datafmt(mf->code);
+       const struct ov5642_datafmt *fmt   = ov5642_find_datafmt(mf->code);
 
-       dev_dbg(sd->v4l2_dev->dev, "%s(%u) width: %u heigth: %u\n",
+       dev_dbg(sd->v4l2_dev->dev, "%s(%u) request width: %u heigth: %u\n",
+                       __func__, mf->code, mf->width, mf->height);
+
+       v4l_bound_align_image(&mf->width, 48, OV5642_MAX_WIDTH, 1,
+                             &mf->height, 32, OV5642_MAX_HEIGHT, 1, 0);
+
+       dev_dbg(sd->v4l2_dev->dev, "%s(%u) return width: %u heigth: %u\n",
                        __func__, mf->code, mf->width, mf->height);
 
        if (!fmt) {
@@ -753,20 +822,16 @@ static int ov5642_try_fmt(struct v4l2_subdev *sd,
                mf->colorspace  = ov5642_colour_fmts[0].colorspace;
        }
 
-       mf->width       = OV5642_WIDTH;
-       mf->height      = OV5642_HEIGHT;
        mf->field       = V4L2_FIELD_NONE;
 
        return 0;
 }
 
-static int ov5642_s_fmt(struct v4l2_subdev *sd,
-                       struct v4l2_mbus_framefmt *mf)
+static int ov5642_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf)
 {
        struct i2c_client *client = v4l2_get_subdevdata(sd);
        struct ov5642 *priv = to_ov5642(client);
-
-       dev_dbg(sd->v4l2_dev->dev, "%s(%u)\n", __func__, mf->code);
+       int ret;
 
        /* MIPI CSI could have changed the format, double-check */
        if (!ov5642_find_datafmt(mf->code))
@@ -774,17 +839,27 @@ static int ov5642_s_fmt(struct v4l2_subdev *sd,
 
        ov5642_try_fmt(sd, mf);
 
+       priv->out_size.width            = mf->width;
+       priv->out_size.height           = mf->height;
+       priv->out_size.total_width      = mf->width + BLANKING_EXTRA_WIDTH;
+       priv->out_size.total_height     = max_t(int, mf->height +
+                                                       BLANKING_EXTRA_HEIGHT,
+                                                       BLANKING_MIN_HEIGHT);
+       priv->crop_rect.width           = mf->width;
+       priv->crop_rect.height          = mf->height;
+
        priv->fmt = ov5642_find_datafmt(mf->code);
 
-       ov5642_write_array(client, ov5642_default_regs_init);
-       ov5642_set_resolution(client);
-       ov5642_write_array(client, ov5642_default_regs_finalise);
+       ret = ov5642_write_array(client, ov5642_default_regs_init);
+       if (!ret)
+               ret = ov5642_set_resolution(sd);
+       if (!ret)
+               ret = ov5642_write_array(client, ov5642_default_regs_finalise);
 
-       return 0;
+       return ret;
 }
 
-static int ov5642_g_fmt(struct v4l2_subdev *sd,
-                       struct v4l2_mbus_framefmt *mf)
+static int ov5642_g_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf)
 {
        struct i2c_client *client = v4l2_get_subdevdata(sd);
        struct ov5642 *priv = to_ov5642(client);
@@ -793,10 +868,12 @@ static int ov5642_g_fmt(struct v4l2_subdev *sd,
 
        mf->code        = fmt->code;
        mf->colorspace  = fmt->colorspace;
-       mf->width       = OV5642_WIDTH;
-       mf->height      = OV5642_HEIGHT;
+       mf->width       = priv->out_size.width;
+       mf->height      = priv->out_size.height;
        mf->field       = V4L2_FIELD_NONE;
 
+       dev_dbg(sd->v4l2_dev->dev, "%s return width: %u heigth: %u\n", __func__,
+                       mf->width, mf->height);
        return 0;
 }
 
@@ -829,14 +906,17 @@ static int ov5642_g_chip_ident(struct v4l2_subdev *sd,
 
 static int ov5642_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 {
+       struct i2c_client *client = v4l2_get_subdevdata(sd);
+       struct ov5642 *priv = to_ov5642(client);
        struct v4l2_rect *rect = &a->c;
-
        a->type         = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-       rect->top       = 0;
-       rect->left      = 0;
-       rect->width     = OV5642_WIDTH;
-       rect->height    = OV5642_HEIGHT;
+       rect->top       = priv->crop_rect.top;
+       rect->left      = priv->crop_rect.left;
+       rect->width     = priv->crop_rect.width;
+       rect->height    = priv->crop_rect.height;
 
+       dev_dbg(sd->v4l2_dev->dev, "%s crop width: %u heigth: %u\n", __func__,
+                       rect->width, rect->height);
        return 0;
 }
 
@@ -844,8 +924,8 @@ static int ov5642_cropcap(struct v4l2_subdev *sd, struct 
v4l2_cropcap *a)
 {
        a->bounds.left                  = 0;
        a->bounds.top                   = 0;
-       a->bounds.width                 = OV5642_WIDTH;
-       a->bounds.height                = OV5642_HEIGHT;
+       a->bounds.width                 = OV5642_MAX_WIDTH;
+       a->bounds.height                = OV5642_MAX_HEIGHT;
        a->defrect                      = a->bounds;
        a->type                         = V4L2_BUF_TYPE_VIDEO_CAPTURE;
        a->pixelaspect.numerator        = 1;
@@ -858,9 +938,8 @@ static int ov5642_g_mbus_config(struct v4l2_subdev *sd,
                                struct v4l2_mbus_config *cfg)
 {
        cfg->type = V4L2_MBUS_CSI2;
-       cfg->flags = V4L2_MBUS_CSI2_2_LANE |
-               V4L2_MBUS_CSI2_CHANNEL_0 |
-               V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
+       cfg->flags = V4L2_MBUS_CSI2_2_LANE | V4L2_MBUS_CSI2_CHANNEL_0 |
+                                       V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
 
        return 0;
 }
@@ -941,8 +1020,15 @@ static int ov5642_probe(struct i2c_client *client,
 
        v4l2_i2c_subdev_init(&priv->subdev, client, &ov5642_subdev_ops);
 
-       icd->ops        = NULL;
-       priv->fmt       = &ov5642_colour_fmts[0];
+       icd->ops                = NULL;
+       priv->fmt               = &ov5642_colour_fmts[0];
+
+       priv->crop_rect.width   = OV5642_DEFAULT_WIDTH;
+       priv->crop_rect.height  = OV5642_DEFAULT_HEIGHT;
+       priv->crop_rect.left    = (OV5642_MAX_WIDTH - OV5642_DEFAULT_WIDTH) / 2;
+       priv->crop_rect.top     = (OV5642_MAX_HEIGHT - OV5642_DEFAULT_HEIGHT) / 
2;
+       priv->out_size.width    = OV5642_DEFAULT_WIDTH;
+       priv->out_size.height   = OV5642_DEFAULT_HEIGHT;
 
        ret = ov5642_video_probe(icd, client);
        if (ret < 0)
@@ -951,6 +1037,7 @@ static int ov5642_probe(struct i2c_client *client,
        return 0;
 
 error:
+       icd->ops = NULL;
        kfree(priv);
        return ret;
 }
@@ -961,6 +1048,7 @@ static int ov5642_remove(struct i2c_client *client)
        struct soc_camera_device *icd = client->dev.platform_data;
        struct soc_camera_link *icl = to_soc_camera_link(icd);
 
+       icd->ops = NULL;
        if (icl->free_bus)
                icl->free_bus(icl);
        kfree(priv);
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to