i dont know about digital, but to me it crashes the USB probe after connect-disconnect-reconnect. after that, it doesnt notice any changes in connected USB devices and need to restart.
it may be possible, that there is some module hanging in there, because i get the same problem when i have femon running and then disconnect the dvb device (no matter which one - volarHD in my case), because it is stuck as femon "uses" the driver. when i kill femon, everything runns again. so my theory is, that there is somewhat stuck in there. and it doesnt help to remove the DVB driver. so it is definitely something with the analogue part (and analog is what i need, because there are not many devices that do analog any more). On Wed, 9 Nov 2011 21:08:59 +0000 (GMT) Norret Thierry <tnor...@yahoo.com> wrote: > Hello, > I have this card > http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-900H and > use gentoo Since I upgrade my kernel from 2.6.38 to 3.* scan for > channel doesn't work and channels can't be lock > > The modules (tm6000) are load, the firmware (xc3028L-v36.fw) is > copied to /lib/firmware, the signal is good but no channels found > with w_scan/vlc/mplayer/kaffeineI don't see any error in dmesg. > > I've try last distros (ubuntu 11.10, fedora 16) with kernel 3.* and > same results. The last git sources from v4l/dvb don't resolve the > problem. > > Thanks > > > # dmesg > [ 81.132653] IR NEC protocol handler initialized > [ 81.158229] tm6000: module is from the staging directory, the > quality is unknown, you have been warned. > [ 81.158801] tm6000 v4l2 driver version 0.0.2 loaded > [ 81.160885] tm6000: alt 0, interface 0, class 255 > [ 81.160890] tm6000: alt 0, interface 0, class 255 > [ 81.160895] tm6000: Bulk IN endpoint: 0x82 (max size=512 bytes) > [ 81.160899] tm6000: alt 0, interface 0, class 255 > [ 81.160903] tm6000: alt 1, interface 0, class 255 > [ 81.160907] tm6000: ISOC IN endpoint: 0x81 (max size=3072 bytes) > [ 81.160911] tm6000: alt 1, interface 0, class 255 > [ 81.160914] tm6000: alt 1, interface 0, class 255 > [ 81.160918] tm6000: INT IN endpoint: 0x83 (max size=4 bytes) > [ 81.160922] tm6000: alt 2, interface 0, class 255 > [ 81.160925] tm6000: alt 2, interface 0, class 255 > [ 81.160929] tm6000: alt 2, interface 0, class 255 > [ 81.160932] tm6000: alt 3, interface 0, class 255 > [ 81.160936] tm6000: alt 3, interface 0, class 255 > [ 81.160939] tm6000: alt 3, interface 0, class 255 > [ 81.160943] tm6000: New video device @ 480 Mbps (2040:6600, ifnum > 0) [ 81.160947] tm6000: Found Hauppauge WinTV HVR-900H / WinTV > USB2-Stick [ 81.167856] Found tm6010 > [ 81.176973] IR RC5(x) protocol handler initialized > [ 81.183409] IR RC6 protocol handler initialized > [ 81.185159] IR JVC protocol handler initialized > [ 81.187524] IR Sony protocol handler initialized > [ 81.201304] lirc_dev: IR Remote Control driver registered, major > 250 [ 81.206121] IR LIRC bridge handler initialized > [ 81.964984] tm6000 #0: i2c eeprom 00: 01 59 54 45 12 01 00 02 00 > 00 00 40 40 20 00 66 .YTE.......@@ .f > [ 82.076933] tm6000 #0: i2c eeprom 10: 69 00 10 20 40 01 02 03 48 > 00 79 00 62 00 72 00 i.. @...H.y.b.r. > [ 82.188834] tm6000 #0: i2c eeprom 20: ff 00 64 ff ff ff ff ff ff > ff ff ff ff ff ff ff ..d............. > [ 82.300725] tm6000 #0: i2c eeprom 30: ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ................ > [ 82.412622] tm6000 #0: i2c eeprom 40: 10 03 48 00 56 00 52 00 39 > 00 30 00 30 00 48 00 ..H.V.R.9.0.0.H. > [ 82.524561] tm6000 #0: i2c eeprom 50: ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ................ > [ 82.636402] tm6000 #0: i2c eeprom 60: 30 ff ff ff 0f ff ff ff ff > ff 0a 03 32 00 2e 00 0...........2... > [ 82.748303] tm6000 #0: i2c eeprom 70: 3f 00 ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ?............... > [ 82.860197] tm6000 #0: i2c eeprom 80: ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ................ > [ 82.972092] tm6000 #0: i2c eeprom 90: 32 ff ff ff 16 03 34 00 30 > 00 33 00 32 00 31 00 2.....4.0.3.2.1. > [ 83.083977] tm6000 #0: i2c eeprom a0: 33 00 34 00 39 00 30 00 32 > 00 00 00 00 00 ff ff 3.4.9.0.2....... > [ 83.195871] tm6000 #0: i2c eeprom b0: ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ................ > [ 83.307773] tm6000 #0: i2c eeprom c0: ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ................ > [ 83.419666] tm6000 #0: i2c eeprom d0: ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ................ > [ 83.531535] tm6000 #0: i2c eeprom e0: ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ................ > [ 83.643448] tm6000 #0: i2c eeprom f0: ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ................ > [ 83.801012] i2c-core: driver [tuner] using legacy suspend method > [ 83.801017] i2c-core: driver [tuner] using legacy resume method > [ 83.801303] tuner 1-0061: Tuner -1 found with type(s) Radio TV. > [ 83.801309] xc2028 1-0061: creating new instance > [ 83.801311] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner > [ 83.801313] Setting firmware parameters for xc2028 > [ 83.804849] xc2028 1-0061: Loading 81 firmware images from > xc3028L-v36.fw, type: xc2028 firmware, ver 3.6 > [ 84.021087] xc2028 1-0061: Loading firmware for type=BASE (1), id > 0000000000000000. > [ 109.684698] xc2028 1-0061: Loading firmware for type=(0), id > 000000000000b700. > [ 110.118322] SCODE (20000000), id 000000000000b700: > [ 110.118331] xc2028 1-0061: Loading SCODE for type=MONO SCODE > HAS_IF_4320 (60008000), id 0000000000008000. > [ 110.733824] tm6000 #0: registered device video1 > [ 110.733831] Trident TVMaster TM5600/TM6000/TM6010 USB2 board (Load > status: 0) > [ 110.733865] usbcore: registered new interface driver tm6000 > [ 110.735587] tm6000: open called (dev=video1) > [ 110.812501] tm6000_dvb: module is from the staging directory, the > quality is unknown, you have been warned. > [ 110.876588] DVB: registering new adapter (Trident TVMaster 6000 > DVB-T) [ 110.876597] DVB: registering adapter 0 frontend 0 (Zarlink > ZL10353 DVB-T)... [ 110.876695] xc2028 1-0061: attaching existing > instance [ 110.876701] xc2028 1-0061: type set to XCeive > xc2028/xc3028 tuner [ 110.876705] tm6000: XC2028/3028 asked to be > attached to frontend! [ 110.876846] tm6000 #0: Initialized (TM6000 > dvb Extension) extension # vlc log when trying to open channel.conf > in kernel 3.0.6 [0xb64eb0] dvb access warning: no lock, tuning again > [0xb64eb0] dvb access debug: using inversion=2 [0xb64eb0] dvb access > debug: using bandwidth=8 [0xb64eb0] dvb access debug: using fec=9 > [0xb64eb0] dvb access debug: using fec=9 > [0xb64eb0] dvb access debug: using transmission=0 > [0xb64eb0] dvb access debug: using guard=0 > [0xb64eb0] dvb access debug: using hierarchy=0 > [0xb64eb0] dvb access debug: frontend has acquired carrier > [0xb64eb0] dvb access debug: frontend has acquired stable FEC > [0xb64eb0] dvb access debug: frontend has acquired sync > [0xb64eb0] dvb access debug: frontend has acquired lock > [0xb64eb0] dvb access debug: - Bit error rate: 0 > [0xb64eb0] dvb access debug: - Signal strength: 40044 > [0xb64eb0] dvb access debug: - SNR: 58596 # mplayer log when trying > to open dvb in kernel 3.0.6 MPlayer SVN-r33094-4.5.3 (C) 2000-2011 > MPlayer Team Lecture de dvb:// > dvb_tune Freq: 554000000 > dvb_streaming_read, attempt N. 6 failed with errno 0 when reading > 2048 bytes dvb_streaming_read, attempt N. 5 failed with errno 0 when > reading 2048 bytes dvb_streaming_read, attempt N. 4 failed with errno > 0 when reading 2048 bytes dvb_streaming_read, attempt N. 3 failed > with errno 0 when reading 2048 bytes dvb_streaming_read, attempt N. 2 > failed with errno 0 when reading 2048 bytes dvb_streaming_read, > attempt N. 1 failed with errno 0 when reading 2048 bytes > dvb_streaming_read, return 0 bytes dvb_streaming_read, attempt N. 6 > failed with errno 0 when reading 2048 bytes dvb_streaming_read, > attempt N. 5 failed with errno 0 when reading 2048 bytes > dvb_streaming_read, attempt N. 4 failed with errno 0 when reading > 2048 bytes dvb_streaming_read, attempt N. 3 failed with errno 0 when > reading 2048 bytes dvb_streaming_read, attempt N. 2 failed with errno > 0 when reading 2048 bytes dvb_streaming_read, attempt N. 1 failed > with errno 0 when reading 2048 bytes dvb_streaming_read, return 0 > bytes > > # w_scan > # w_scan kernel 3.0.6 > w_scan version 20110702 (compiled for DVB API 5.2) > using settings for FRANCE > DVB aerial > DVB-T FR > frontend_type DVB-T, channellist 5 > output format czap/tzap/szap/xine > output charset 'UTF-8', use -C <charset> to override > Info: using DVB adapter auto detection. > /dev/dvb/adapter0/frontend0 -> DVB-T "Zarlink ZL10353 DVB-T": > good :-) Using DVB-T frontend (adapter /dev/dvb/adapter0/frontend0) > -_-_-_-_ Getting frontend capabilities-_-_-_-_ > Using DVB API 5.3 > frontend 'Zarlink ZL10353 DVB-T' supports > INVERSION_AUTO > QAM_AUTO > TRANSMISSION_MODE_AUTO > GUARD_INTERVAL_AUTO > HIERARCHY_AUTO > FEC_AUTO > FREQ (174.00MHz ... 862.00MHz) > -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ > Scanning 7MHz frequencies... > 177500: (time: 00:00) > 184500: (time: 00:29) > . > . > 857833: (time: 09:39) > tune to: QAM_AUTO f = 474000 kHz I999B8C999D999T999G999Y999 > (time: 09:42) Info: PAT filter timeout > Info: SDT(actual) filter timeout > Info: NIT(actual) filter timeout > tune to: QAM_AUTO f = 554000 kHz I999B8C999D999T999G999Y999 > (time: 09:57) Info: PAT filter timeout > Info: SDT(actual) filter timeout > Info: NIT(actual) filter timeout > tune to: QAM_AUTO f = 578000 kHz I999B8C999D999T999G999Y999 > (time: 10:11) Info: PAT filter timeout > Info: SDT(actual) filter timeout > Info: NIT(actual) filter timeout > tune to: QAM_AUTO f = 602000 kHz I999B8C999D999T999G999Y999 > (time: 10:26) Info: PAT filter timeout > Info: SDT(actual) filter timeout > Info: NIT(actual) filter timeout > tune to: QAM_AUTO f = 658000 kHz I999B8C999D999T999G999Y999 > (time: 10:41) Info: PAT filter timeout > Info: SDT(actual) filter timeout > Info: NIT(actual) filter timeout > tune to: QAM_AUTO f = 714000 kHz I999B8C999D999T999G999Y999 > (time: 10:55) Info: PAT filter timeout > Info: SDT(actual) filter timeout > Info: NIT(actual) filter timeout > dumping lists (0 services) > Done. > > -- > To unsubscribe from this list: send the line "unsubscribe > linux-media" in the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Lars Schotte @ Hana (F16) -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
