Hello, On Sat, Jan 21, 2012 at 5:04 PM, Mauro Carvalho Chehab <mche...@redhat.com> wrote: > > Terratec H7 is a Cypress FX2 device with a mt2063 tuner and a drx-k > demod. This series add support for it. It started with a public > tree found at: > > http://linux.terratec.de/files/TERRATEC_H7/20110323_TERRATEC_H7_Linux.tar.gz > > The driver were almost completely re-written, and it is now working, > at least with DVB-C. I don't have a DVB-T signal here for testing, > but I suspect it should also work fine. > > The FX2 firmware has a NEC IR decoder. The driver has support for > it. The default keytable has support for the black Terratec IR > and for the grey IR with orange keys. >
Do I need to do anything special to make this driver work? I just installed the newest media drivers (by following instructions at http://git.linuxtv.org/media_build.git) on a maxhine running Xubuntu 11.10: tingo@kg-f4:~/work/media_ build$ uname -a Linux kg-f4 3.0.0-15-generic #26-Ubuntu SMP Fri Jan 20 17:23:00 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux This machine has a TerraTec H7 connected, lsusb shows: tingo@kg-f4:~/work/media_build$ sudo lsusb -s 1:6 Bus 001 Device 006: ID 0ccd:10a3 TerraTec Electronic GmbH But after installing the drivers, and after a reboot of the machine, the dvb-usb-az6007 driver doesn't load. If I manually do 'sudo modprobe dvb-usb-az6007', the driver loads, but all I get in dmesg is this: [ 1049.838911] WARNING: You are using an experimental version of the media stack. [ 1049.838917] As the driver is backported to an older kernel, it doesn't offer [ 1049.838922] enough quality for its usage in production. [ 1049.838925] Use it with care. [ 1049.838928] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org): [ 1049.838932] 59b30294e14fa6a370fdd2bc2921cca1f977ef16 Merge branch 'v4l_for_linus' into staging/for_v3.4 [ 1049.838936] 72565224609a23a60d10fcdf42f87a2fa8f7b16d [media] cxd2820r: sleep on DVB-T/T2 delivery system switch [ 1049.838941] 46de20a78ae4b122b79fc02633e9a6c3d539ecad [media] anysee: fix CI init [ 1049.857524] IR NEC protocol handler initialized [ 1049.892787] usbcore: registered new interface driver dvb_usb_az6007 [ 1049.905264] IR RC5(x) protocol handler initialized [ 1049.919476] IR RC6 protocol handler initialized [ 1049.929152] IR JVC protocol handler initialized [ 1049.943103] IR Sony protocol handler initialized [ 1049.956308] IR SANYO protocol handler initialized [ 1049.966667] IR MCE Keyboard/mouse protocol handler initialized [ 1049.989256] lirc_dev: IR Remote Control driver registered, major 250 [ 1050.003618] IR LIRC bridge handler initialized [ 1445.609008] usb 1-2: USB disconnect, device number 5 [ 1449.944046] usb 1-2: new high speed USB device number 6 using ehci_hcd and there aren't anything created in /dev/dvb. What am I doing wrong? -- Regards, Torfinn Ingolfsen -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
