v4l2-compliance output for this driver
root:/> v4l2-compliance -d 0
Driver Info:bfin_display bfin_display.0: ================= START STATUS
=================
Driver name : bfin_display
Card type : BF609
Bus info : platform:bfin_display
Driver version: 3.5.0
Capabilities : 0x84000002
Video Output
Streaming
Device Capabilities
Device Caps : 0x04000002
Video Output
Streaming
Compliance test for device /dev/video0 (not using libv4l2):
Required ioctls:
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second video open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
Debug ioctls:
test VIDIOC_DBG_G_CHIP_IDENT: OK (Not Supported)
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
adv7511 0-0039: power off
adv7511 0-0039: detected hotplug, detected Rx Sense, no EDID (0 block(s))
adv7511 0-0039: state: in reset, error: no error, detect count: 0, msk/irq:
c4/c0
adv7511 0-0039: RGB quantization: full range
adv7511 0-0039: timings: 1280x720p60 (1650x750). Pix freq. = 74250000 Hz.
Polarities = 0x3
adv7511 0-0039: edid_i2_addr: 0x7e
bfin_display bfin_display.0: ================== END STATUS ==================
test VIDIOC_LOG_STATUS: OK
Input ioctls:
test VIDIOC_G/S_TUNER: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 1 Audio Outputs: 0 Modulators: 0
Control ioctls:
test VIDIOC_QUERYCTRL/MENU: OK
test VIDIOC_G/S_CTRL: OK
fail: v4l2-test-controls.cpp(511): g_ext_ctrls does not support
count == 0
test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Input/Output configuration ioctls:
fail: v4l2-test-io-config.cpp(65): could set standard to ATSC,
which is not supported anymore
fail: v4l2-test-io-config.cpp(148): STD failed for output 0.
test VIDIOC_ENUM/G/S/QUERY_STD: FAIL
test VIDIOC_ENUM/G/S/QUERY_DV_PRESETS: OK (Not Supported)
fail: v4l2-test-io-config.cpp(287): TIMINGS cap set, but no
timings can be enumerated
fail: v4l2-test-io-config.cpp(337): Timings check failed for
output 0.
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: FAIL
fail: v4l2-test-io-config.cpp(350): TIMINGS cap set, but could
not get timings caps
fail: v4l2-test-io-config.cpp(401): Timings cap check failed
for output 0.
test VIDIOC_DV_TIMINGS_CAP: FAIL
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
fail: v4l2-test-formats.cpp(379): unknown pixelformat ffffffff
for buftype 2
fail: v4l2-test-formats.cpp(566): Video Output is valid, but
TRY_FMT failed to return a format
test VIDIOC_TRY_FMT: FAIL
fail: v4l2-test-formats.cpp(379): unknown pixelformat ffffffff
for buftype 2
fail: v4l2-test-formats.cpp(719): Video Output is valid, but no
S_FMT was implemented
test VIDIOC_S_FMT: FAIL
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
Total: 38, Succeeded: 32, Failed: 6, Warnings: 1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
