Hi,
I currently try to make my Technisat IR-RC work.
But nothing happens when I press a key.
What's wrong?
I checked the RC using a photo camera: at least it emits IR.
triggerhappy config:
DAEMON_OPTS="--triggers /etc/triggerhappy/triggers.d/ /dev/input/event0
/dev/input/event1"
KEY_1 1 logger thd recieved KEY_1 from Technisat RC
KEY_2 1 logger thd recieved KEY_2 from Technisat RC
KEY_3 1 logger thd recieved KEY_3 from Technisat RC
...
(keys from rc-technisat-usb2.c see syslog below)
Triggerhappy works fine with events from event0
but not from event1
$ inputeventdaemon -l
/dev/input/event0:
name : gpio-keys
phys : gpio-keys/input0
features : syn keys
/dev/input/event1:
name : IR-receiver inside an USB DVB receiver
phys : usb-0000:01:00.0-1/ir0
features : syn keys reserved repeat
/dev/input/event2:
name : MCE IR Keyboard/Mouse (technisat-usb2)
phys : /input0
features : syn keys relative reserved repeat
$ lsusb -t
...
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
|__ Port 1: Dev 3, If 0, Class=vend., Driver=dvb_usb_technisat_usb2,
480M
syslog:
dvb-usb: found a 'Technisat SkyStar USB HD (DVB-S/S2)' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software
demuxer.
DVB: registering new adapter (Technisat SkyStar USB HD (DVB-S/S2))
dvb-usb: MAC address: xxxxx
stv6110x_attach: Attaching STV6110x
technisat-usb2: i2c-error: 60 = 7
usb 1-1: DVB: registering adapter 0 frontend 0 (Technisat SkyStar USB HD
(DVB-S/S2))...
Registered IR keymap rc-technisat-usb2
input: IR-receiver inside an USB DVB receiver as
/devices/soc/soc:pcie-controller/pci0000:00/0000:00:01.0/0000:01:00.0/usb1/1-1/rc/rc0/input1
evbug: Connected device: input1 (IR-receiver inside an USB DVB receiver
at usb-0000:01:00.0-1/ir0)
rc0: IR-receiver inside an USB DVB receiver as
/devices/soc/soc:pcie-controller/pci0000:00/0000:00:01.0/0000:01:00.0/usb1/1-1/rc/rc0
IR NEC protocol handler initialized
IR RC5(x/sz) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR SANYO protocol handler initialized
IR Sharp protocol handler initialized
dvb-usb: schedule remote query interval to 100 msecs.
do I need those protocol handlers?
do I need lirc?
thanks,
Jan
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
