Hauppauge HVR-2205 and HVR-2215 are PCIe dual tuner cards that support
DVB-C, DVB-T and DVB-T2.
PCIe bridge: SAA7164
Demodulator: Si2168-B40
Tuner: SI2157-A20
I know there's parallel activity ongoing regarding these devices, but I
thought I'll submit my own version here as well. The maintainers of each
module can then make the call what to merge.
Signed-off-by: Olli Salonen <olli.salo...@iki.fi>
---
drivers/media/pci/saa7164/Kconfig | 2 +
drivers/media/pci/saa7164/saa7164-cards.c | 101 ++++++++++++++++++++++++++++++
drivers/media/pci/saa7164/saa7164-dvb.c | 67 ++++++++++++++++++++
drivers/media/pci/saa7164/saa7164.h | 2 +
4 files changed, 172 insertions(+)
diff --git a/drivers/media/pci/saa7164/Kconfig
b/drivers/media/pci/saa7164/Kconfig
index a53db7d..5ebe930 100644
--- a/drivers/media/pci/saa7164/Kconfig
+++ b/drivers/media/pci/saa7164/Kconfig
@@ -8,7 +8,9 @@ config VIDEO_SAA7164
select VIDEOBUF_DVB
select DVB_TDA10048 if MEDIA_SUBDRV_AUTOSELECT
select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_SI2157 if MEDIA_SUBDRV_AUTOSELECT
---help---
This is a video4linux driver for NXP SAA7164 based
TV cards.
diff --git a/drivers/media/pci/saa7164/saa7164-cards.c
b/drivers/media/pci/saa7164/saa7164-cards.c
index 5b72da5..5ebd312 100644
--- a/drivers/media/pci/saa7164/saa7164-cards.c
+++ b/drivers/media/pci/saa7164/saa7164-cards.c
@@ -499,6 +499,90 @@ struct saa7164_board saa7164_boards[] = {
.i2c_reg_len = REGLEN_8bit,
} },
},
+ [SAA7164_BOARD_HAUPPAUGE_HVR2205] = {
+ .name = "Hauppauge WinTV-HVR2205",
+ .porta = SAA7164_MPEG_DVB,
+ .portb = SAA7164_MPEG_DVB,
+ .chiprev = SAA7164_CHIP_REV3,
+ .unit = {{
+ .id = 0x28,
+ .type = SAA7164_UNIT_EEPROM,
+ .name = "4K EEPROM",
+ .i2c_bus_nr = SAA7164_I2C_BUS_0,
+ .i2c_bus_addr = 0xa0 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x04,
+ .type = SAA7164_UNIT_TUNER,
+ .name = "SI2157-1",
+ .i2c_bus_nr = SAA7164_I2C_BUS_1,
+ .i2c_bus_addr = 0xc0 >> 1,
+ .i2c_reg_len = 0,
+ }, {
+ .id = 0x05,
+ .type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
+ .name = "SI2168-1",
+ .i2c_bus_nr = SAA7164_I2C_BUS_1,
+ .i2c_bus_addr = 0xc8 >> 1,
+ .i2c_reg_len = 0,
+ }, {
+ .id = 0x25,
+ .type = SAA7164_UNIT_TUNER,
+ .name = "SI2157-2",
+ .i2c_bus_nr = SAA7164_I2C_BUS_2,
+ .i2c_bus_addr = 0xc0 >> 1,
+ .i2c_reg_len = 0,
+ }, {
+ .id = 0x26,
+ .type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
+ .name = "SI2168-2",
+ .i2c_bus_nr = SAA7164_I2C_BUS_2,
+ .i2c_bus_addr = 0xcc >> 1,
+ .i2c_reg_len = 0,
+ } },
+ },
+ [SAA7164_BOARD_HAUPPAUGE_HVR2215] = {
+ .name = "Hauppauge WinTV-HVR2215",
+ .porta = SAA7164_MPEG_DVB,
+ .portb = SAA7164_MPEG_DVB,
+ .chiprev = SAA7164_CHIP_REV3,
+ .unit = {{
+ .id = 0x28,
+ .type = SAA7164_UNIT_EEPROM,
+ .name = "4K EEPROM",
+ .i2c_bus_nr = SAA7164_I2C_BUS_0,
+ .i2c_bus_addr = 0xa0 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x04,
+ .type = SAA7164_UNIT_TUNER,
+ .name = "SI2157-1",
+ .i2c_bus_nr = SAA7164_I2C_BUS_1,
+ .i2c_bus_addr = 0xc0 >> 1,
+ .i2c_reg_len = 0,
+ }, {
+ .id = 0x05,
+ .type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
+ .name = "SI2168-1",
+ .i2c_bus_nr = SAA7164_I2C_BUS_1,
+ .i2c_bus_addr = 0xc8 >> 1,
+ .i2c_reg_len = 0,
+ }, {
+ .id = 0x25,
+ .type = SAA7164_UNIT_TUNER,
+ .name = "SI2157-2",
+ .i2c_bus_nr = SAA7164_I2C_BUS_2,
+ .i2c_bus_addr = 0xc0 >> 1,
+ .i2c_reg_len = 0,
+ }, {
+ .id = 0x26,
+ .type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
+ .name = "SI2168-2",
+ .i2c_bus_nr = SAA7164_I2C_BUS_2,
+ .i2c_bus_addr = 0xcc >> 1,
+ .i2c_reg_len = 0,
+ } },
+ },
};
const unsigned int saa7164_bcount = ARRAY_SIZE(saa7164_boards);
@@ -546,6 +630,14 @@ struct saa7164_subid saa7164_subids[] = {
.subvendor = 0x0070,
.subdevice = 0x8953,
.card = SAA7164_BOARD_HAUPPAUGE_HVR2200_5,
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0xf120,
+ .card = SAA7164_BOARD_HAUPPAUGE_HVR2205,
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0xf123,
+ .card = SAA7164_BOARD_HAUPPAUGE_HVR2215,
},
};
const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids);
@@ -591,6 +683,8 @@ void saa7164_gpio_setup(struct saa7164_dev *dev)
case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_5:
+ case SAA7164_BOARD_HAUPPAUGE_HVR2205:
+ case SAA7164_BOARD_HAUPPAUGE_HVR2215:
case SAA7164_BOARD_HAUPPAUGE_HVR2250:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
@@ -647,6 +741,11 @@ static void hauppauge_eeprom(struct saa7164_dev *dev, u8
*eeprom_data)
/* WinTV-HVR2200 (PCIe, Retail, half-height)
* DVB-T (TDA18271/TDA10048) and basic analog, no IR */
break;
+ case 151009:
+ case 151609:
+ /* WinTV-HVR2205/HVR2215 (PCIe, Retail, full-height bracket)
+ * DVB-T2/C (Si2157/Si2168) and basic analog, FM */
+ break;
default:
printk(KERN_ERR "%s: Warning: Unknown Hauppauge model #%d\n",
dev->name, tv.model);
@@ -673,6 +772,8 @@ void saa7164_card_setup(struct saa7164_dev *dev)
case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_5:
+ case SAA7164_BOARD_HAUPPAUGE_HVR2205:
+ case SAA7164_BOARD_HAUPPAUGE_HVR2215:
case SAA7164_BOARD_HAUPPAUGE_HVR2250:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
diff --git a/drivers/media/pci/saa7164/saa7164-dvb.c
b/drivers/media/pci/saa7164/saa7164-dvb.c
index 6b9e8f6..2242ef5 100644
--- a/drivers/media/pci/saa7164/saa7164-dvb.c
+++ b/drivers/media/pci/saa7164/saa7164-dvb.c
@@ -24,6 +24,8 @@
#include "tda10048.h"
#include "tda18271.h"
#include "s5h1411.h"
+#include "si2168.h"
+#include "si2157.h"
#define DRIVER_NAME "saa7164"
@@ -519,6 +521,71 @@ int saa7164_dvb_register(struct saa7164_port *port)
break;
}
break;
+ case SAA7164_BOARD_HAUPPAUGE_HVR2205:
+ case SAA7164_BOARD_HAUPPAUGE_HVR2215:
+ {
+ struct si2168_config si2168_config;
+ struct si2157_config si2157_config;
+ struct i2c_board_info info;
+ struct i2c_adapter *adapter;
+ struct i2c_client *client_demod = NULL;
+ struct i2c_client *client_tuner = NULL;
+
+ i2c_bus = &dev->i2c_bus[port->nr + 1];
+
+ /* attach frontend */
+ memset(&si2168_config, 0, sizeof(si2168_config));
+ si2168_config.i2c_adapter = &adapter;
+ si2168_config.fe = &port->dvb.frontend;
+ si2168_config.ts_mode = SI2168_TS_SERIAL;
+ si2168_config.ts_clock_gapped = true;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ switch (port->nr) {
+ case 0:
+ info.addr = 0xc8 >> 1;
+ break;
+ case 1:
+ info.addr = 0xcc >> 1;
+ break;
+ }
+ strlcpy(info.type, "si2168", I2C_NAME_SIZE);
+ info.platform_data = &si2168_config;
+ request_module(info.type);
+ client_demod = i2c_new_device(&i2c_bus->i2c_adap,
+ &info);
+ if (client_demod == NULL ||
+ client_demod->dev.driver == NULL)
+ break;
+ if (!try_module_get(client_demod->dev.driver->owner)) {
+ i2c_unregister_device(client_demod);
+ break;
+ }
+ port->i2c_client_demod = client_demod;
+
+ /* attach tuner */
+ memset(&si2157_config, 0, sizeof(si2157_config));
+ si2157_config.fe = port->dvb.frontend;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "si2157", I2C_NAME_SIZE);
+ info.addr = 0xc0 >> 1;
+ info.platform_data = &si2157_config;
+ request_module(info.type);
+ client_tuner = i2c_new_device(adapter, &info);
+ if (client_tuner == NULL ||
+ client_tuner->dev.driver == NULL) {
+ module_put(client_demod->dev.driver->owner);
+ i2c_unregister_device(client_demod);
+ break;
+ }
+ if (!try_module_get(client_tuner->dev.driver->owner)) {
+ i2c_unregister_device(client_tuner);
+ module_put(client_demod->dev.driver->owner);
+ i2c_unregister_device(client_demod);
+ break;
+ }
+ port->i2c_client_tuner = client_tuner;
+ break;
+ }
case SAA7164_BOARD_HAUPPAUGE_HVR2250:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
diff --git a/drivers/media/pci/saa7164/saa7164.h
b/drivers/media/pci/saa7164/saa7164.h
index 37e450a..1b41849 100644
--- a/drivers/media/pci/saa7164/saa7164.h
+++ b/drivers/media/pci/saa7164/saa7164.h
@@ -83,6 +83,8 @@
#define SAA7164_BOARD_HAUPPAUGE_HVR2250_3 8
#define SAA7164_BOARD_HAUPPAUGE_HVR2200_4 9
#define SAA7164_BOARD_HAUPPAUGE_HVR2200_5 10
+#define SAA7164_BOARD_HAUPPAUGE_HVR2205 11
+#define SAA7164_BOARD_HAUPPAUGE_HVR2215 12
#define SAA7164_MAX_UNITS 8
#define SAA7164_TS_NUMBER_OF_LINES 312
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
