On 15-05-14 05:52 PM, Felipe Balbi wrote:
Hi,
On Wed, Apr 22, 2015 at 04:04:10PM -0700, Arun Ramamurthy wrote:
Most of the phy providers use "select" to enable GENERIC_PHY. Since select
is only recommended when the config is not visible, GENERIC_PHY is changed
an invisible option. To maintain consistency, all phy providers are changed
to "select" GENERIC_PHY and all non-phy drivers use "depends on" when the
phy framework is explicity required. USB_MUSB_OMAP2PLUS has a cyclic
dependency, so it is left as "select".
Signed-off-by: Arun Ramamurthy <arun.ramamur...@broadcom.com>
---
drivers/ata/Kconfig | 1 -
drivers/media/platform/exynos4-is/Kconfig | 2 +-
drivers/phy/Kconfig | 4 ++--
drivers/usb/host/Kconfig | 4 ++--
drivers/video/fbdev/exynos/Kconfig | 2 +-
5 files changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 5f60155..6d2e881 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -301,7 +301,6 @@ config SATA_MV
tristate "Marvell SATA support"
depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
- select GENERIC_PHY
help
This option enables support for the Marvell Serial ATA family.
Currently supports 88SX[56]0[48][01] PCI(-X) chips,
diff --git a/drivers/media/platform/exynos4-is/Kconfig
b/drivers/media/platform/exynos4-is/Kconfig
index b7b2e47..b6f3eaa 100644
--- a/drivers/media/platform/exynos4-is/Kconfig
+++ b/drivers/media/platform/exynos4-is/Kconfig
@@ -31,7 +31,7 @@ config VIDEO_S5P_FIMC
config VIDEO_S5P_MIPI_CSIS
tristate "S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS) driver"
depends on REGULATOR
- select GENERIC_PHY
+ depends on GENERIC_PHY
help
This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC MIPI-CSI2
receiver (MIPI-CSIS) devices.
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 2962de2..edecdb1 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -5,7 +5,7 @@
menu "PHY Subsystem"
config GENERIC_PHY
- bool "PHY Core"
+ bool
help
Generic PHY support.
@@ -72,7 +72,7 @@ config PHY_MIPHY365X
config PHY_RCAR_GEN2
tristate "Renesas R-Car generation 2 USB PHY driver"
depends on ARCH_SHMOBILE
- depends on GENERIC_PHY
+ select GENERIC_PHY
so some you changed from depends to select...
help
Support for USB PHY found on Renesas R-Car generation 2 SoCs.
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 5ad60e4..e2197e2 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -182,7 +182,7 @@ config USB_EHCI_HCD_SPEAR
config USB_EHCI_HCD_STI
tristate "Support for ST STiHxxx on-chip EHCI USB controller"
depends on ARCH_STI && OF
- select GENERIC_PHY
+ depends on GENERIC_PHY
while others you changed from select to depends.
NAK.
Felipe, I dont understand your concern, could you please explain it more
detail? The logic behind the changes is that in cases where there was
an explicit dependency, I changed it to "depends on" and in other cases
I changed it to "selects". Thanks
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
