Controller resets private registers to default values when
RESET_ALL occurs.  The callback allows us to restore the values.

Signed-off-by: Philip Rakity <[email protected]>
---
 drivers/mmc/host/sdhci-pxa.c |   66 ++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 66 insertions(+), 0 deletions(-)

diff --git a/drivers/mmc/host/sdhci-pxa.c b/drivers/mmc/host/sdhci-pxa.c
index 52ed5a9..2a6b156 100644
--- a/drivers/mmc/host/sdhci-pxa.c
+++ b/drivers/mmc/host/sdhci-pxa.c
@@ -29,6 +29,21 @@
 
 #define DRIVER_NAME    "sdhci-pxa"
 
+#define SD_CFG_FIFO_PARAM       0x100
+#define SDCFG_GEN_PAD_CLK_ON   (1<<6)
+
+#define SD_CLOCK_AND_BURST_SIZE_SETUP   0x10A
+#define SDCLK_DELAY_MASK     0x1F
+#define SDCLK_SEL_MASK       0x1
+#define SDCLK_DELAY_SHIFT    9
+#define SDCLK_SEL_SHIFT      8
+
+#define SD_CE_ATA_2          0x10E
+#define SDCE_MISC_INT          (1<<2)
+#define SDCE_MISC_INT_EN       (1<<1)
+
+#define DISABLE_CLOCK_GATING 0
+
 struct sdhci_pxa {
        struct sdhci_host               *host;
        struct sdhci_pxa_platdata       *pdata;
@@ -74,9 +89,59 @@ static unsigned int set_signaling_voltage(struct sdhci_host 
*host,
        return 0;
 }
 
+
+static void set_clock_and_burst_size(struct sdhci_host *host)
+{
+       u16 tmp;
+       struct sdhci_pxa *pxa = sdhci_priv(host);
+
+       pr_debug("%s:%s: adjust = %d\n",
+               __func__, mmc_hostname(host->mmc), pxa->pdata->adjust_clocks);
+
+       if (pxa->pdata->adjust_clocks) {
+               tmp = readw(host->ioaddr + SD_CLOCK_AND_BURST_SIZE_SETUP);
+               pr_debug("%s:%s: (B) SD_CLOCK_AND_BURST = %04X, "
+                       "delay = %d, sel = %d\n",
+                       __func__, mmc_hostname(host->mmc), tmp,
+                       pxa->pdata->clk_delay, pxa->pdata->clk_select);
+               tmp &= ~(SDCLK_DELAY_MASK << SDCLK_DELAY_SHIFT);
+               tmp &= ~(SDCLK_SEL_MASK << SDCLK_SEL_SHIFT);
+               tmp |= (pxa->pdata->clk_delay & SDCLK_DELAY_MASK) <<
+                       SDCLK_DELAY_SHIFT;
+               tmp |= (pxa->pdata->clk_select & SDCLK_SEL_MASK) <<
+                       SDCLK_SEL_SHIFT;
+               writew(tmp, host->ioaddr + SD_CLOCK_AND_BURST_SIZE_SETUP);
+               pr_debug("%s:%s: (A) SD_CLOCK_AND_BURST_SIZE_SETUP = %04X\n",
+                       __func__, mmc_hostname(host->mmc), tmp);
+       }
+}
+
+static void programFIFO(struct sdhci_host *host, int enable)
+{
+       unsigned short tmp;
+
+       tmp = readw(host->ioaddr + SDHCI_HOST_CONTROL_2);
+
+       if (enable)
+               tmp |= SDCTRL_2_ASYNC_INT_EN;
+       else
+               tmp &= ~SDCTRL_2_ASYNC_INT_EN;
+
+       writew(tmp, host->ioaddr + SDHCI_HOST_CONTROL_2);
+}
+
+static void platform_reset_exit(struct sdhci_host *host, u8 mask)
+{
+       if (mask == SDHCI_RESET_ALL) {
+               programFIFO(host, DISABLE_CLOCK_GATING);
+               set_clock_and_burst_size(host);
+       }
+}
+
 static struct sdhci_ops sdhci_pxa_ops = {
        .get_f_max_clock = NULL,
        .set_signaling_voltage = set_signaling_voltage,
+       .platform_reset_exit = platform_reset_exit,
 };
 
 /*****************************************************************************\
@@ -215,6 +280,7 @@ static int __devexit sdhci_pxa_remove(struct 
platform_device *pdev)
        return 0;
 }
 
+
 #ifdef CONFIG_PM
 static int sdhci_pxa_suspend(struct platform_device *dev, pm_message_t state)
 {
-- 
1.7.0.4


--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to