On May 29, 2011, at 10:42 PM, zhangfei gao wrote:
>>
>> There is a little room for simplification, I think:
>>
>>> +static unsigned int mmp2_get_ro(struct sdhci_host *host)
>>> +{
>>> + /* Micro SD does not support write-protect feature */
>>> + return 0;
>>> +}
>>
>> You shouldn't need to provide an empty get_ro function, the
>> default is that there is no write-protect.
>
> Thanks Arnd for review.
> The reason to put get_ro here is some board use micro sd, while some
> board design is general sd card.
> The micro sd do not use write-protect, while SDHCI_WRITE_PROTECT will
> return 1 in our controller, so it shows read only.
> So add one call back for the board with micro sd card via flag.
The code sets get_ro is for all the controllers. Some board designs may
connect the WP signal.
The host->ops field should be filled in using information in the board
file using a flag such as the example with PXA_FLAG_CARD_PERMANENT.
eg
if (pdata && pdata->flags & PXA_FLAG_NO_WP) {
***** etc ****
}
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
