Hi Chung, Glad to see HPI command is useful in our MMC stack. :) If this patch can also include a case which uses mmc_interrupt_hpi function, that would be better.
> -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Jaehoon Chung > Sent: Monday, August 08, 2011 2:29 PM > To: [email protected] > Cc: Chris Ball; Dong, Chuanxiao; Kyungmin Park; Hanumath Prasad; > [email protected] > Subject: [PATCH] mmc: support HPI send command > > HPI command is defined in eMMC4.41. > We didn't use this command. > But maybe we need to use HPI command for using eMMC4.5 feature. > > Many patches related with HPI sent to mailing. > (This patch is based on Chuanxiao's patch.) > But this patch is added sending function for HPI command. > > Signed-off-by: Jaehoon Chung <[email protected]> > Signed-off-by: Kyungmin Park <[email protected]> > Signed-off-by: Chuanxiao Dong <[email protected]> > CC: Hanumath Prasad <[email protected]> > > --- > drivers/mmc/core/core.c | 28 ++++++++++++++++++++++++++++ > drivers/mmc/core/mmc.c | 37 > ++++++++++++++++++++++++++++++++++++- > drivers/mmc/core/mmc_ops.c | 31 +++++++++++++++++++++++++++++++ > drivers/mmc/core/mmc_ops.h | 1 + > include/linux/mmc/card.h | 4 ++++ > include/linux/mmc/core.h | 1 + > include/linux/mmc/mmc.h | 3 +++ > 7 files changed, 104 insertions(+), 1 deletions(-) > > diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c > index f091b43..a20ff75 100644 > --- a/drivers/mmc/core/core.c > +++ b/drivers/mmc/core/core.c > @@ -346,6 +346,34 @@ int mmc_wait_for_cmd(struct mmc_host *host, struct > mmc_command *cmd, int retries > > EXPORT_SYMBOL(mmc_wait_for_cmd); > > +int mmc_interrupt_hpi(struct mmc_card *card) > +{ > + int err; > + u32 status; > + > + BUG_ON(!card); > + > + if (!card->ext_csd.hpi_en) { > + printk(KERN_INFO "Didn't set HPI enable bit!\n"); > + return 0; > + } > + > + err = mmc_send_status(card, &status); > + if (err) > + return err; > + > + /* If Card status is prg-state, can send HPI command */ Yes, this is right. Before sending HPI command, the card should be in prg-state. But, > + if (R1_CURRENT_STATE(status) == 7) { > + err = mmc_send_hpi_cmd(card, &status); > + if (err) > + return err; When sending HPI command to card, maybe the card is already out of prg-state. This implementation cannot make sure when sending HPI command, card is actually in prg-state. So if card is already not in prg-state, then you will get some error. For sdhci host controller, response timeout error will be returned back. So here driver may return with error. Suggest to add some error handling in mmc_send_hpi_cmd to avoid this. If the error is caused by improper scenario of sending HPI command, then we can ignore this. What do you think? > + } > + > + return 0; > + > +} > +EXPORT_SYMBOL(mmc_interrupt_hpi); > + > /** > * mmc_set_data_timeout - set the timeout for a data command > * @data: data phase for command > diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c > index 5700b1c..c51ae8c 100644 > --- a/drivers/mmc/core/mmc.c > +++ b/drivers/mmc/core/mmc.c > @@ -402,8 +402,26 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 > *ext_csd) > ext_csd[EXT_CSD_TRIM_MULT]; > } > > - if (card->ext_csd.rev >= 5) > + if (card->ext_csd.rev >= 5) { > + /* check whether the eMMC card support HPI */ > + if (ext_csd[EXT_CSD_HPI_FEATURES] & 0x1) { > + card->ext_csd.hpi = 1; > + if (ext_csd[EXT_CSD_HPI_FEATURES] & 0x2) > + card->ext_csd.hpi_cmd = > + MMC_STOP_TRANSMISSION; > + else > + card->ext_csd.hpi_cmd = > + MMC_SEND_STATUS; > + > + /* > + * Indicate the maximum timeout to close > + * a command interrupted by HPI > + */ > + card->ext_csd.out_of_int_time = > + ext_csd[EXT_CSD_OUT_OF_INTERRUPT_TIME] * 10; > + } > card->ext_csd.rel_param = ext_csd[EXT_CSD_WR_REL_PARAM]; > +} > > if (ext_csd[EXT_CSD_ERASED_MEM_CONT]) > card->erased_byte = 0xFF; > @@ -726,6 +744,23 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, > } > > /* > + * Enable HPI feature (if supported) > + */ > + if (card->ext_csd.hpi) { > + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, > + EXT_CSD_HPI_MGMT, 1, 0); > + if (err && err != -EBADMSG) > + goto free_card; > + > + if (err) { > + printk(KERN_WARNING "%s: Enabling HPI failed\n", > + mmc_hostname(card->host)); > + err = 0; > + } else > + card->ext_csd.hpi_en = 1; > + } > + > + /* > * Compute bus speed. > */ > max_dtr = (unsigned int)-1; > diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c > index 845ce7c..f111907 100644 > --- a/drivers/mmc/core/mmc_ops.c > +++ b/drivers/mmc/core/mmc_ops.c > @@ -547,3 +547,34 @@ int mmc_bus_test(struct mmc_card *card, u8 bus_width) > err = mmc_send_bus_test(card, card->host, MMC_BUS_TEST_R, width); > return err; > } > + > +int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status) > +{ > + struct mmc_command cmd; > + unsigned int opcode; > + unsigned int flags; > + int err; > + > + opcode = card->ext_csd.hpi_cmd; > + if (opcode == MMC_STOP_TRANSMISSION) > + flags = MMC_RSP_R1B | MMC_CMD_AC; > + else if (opcode == MMC_SEND_STATUS) > + flags = MMC_RSP_R1 | MMC_CMD_AC; > + > + memset(&cmd, 0, sizeof(struct mmc_command)); > + cmd.opcode = opcode; > + cmd.arg = card->rca << 16 | 1; > + cmd.flags = flags; > + cmd.cmd_timeout_ms = card->ext_csd.out_of_int_time; > + > + err = mmc_wait_for_cmd(card->host, &cmd, 0); > + if (err) { This error may caused by improper scenario of sending HPI command. But not some response or data error. Thanks Chuanxiao > + printk(KERN_ERR "error %d interrupting operation" > + "HPI command response %#x\n", > + err, cmd.resp[0]); > + return err; > + } > + if (status) > + *status = cmd.resp[0]; > + return 0; > +} > diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h > index 9276946..2a6e0db 100644 > --- a/drivers/mmc/core/mmc_ops.h > +++ b/drivers/mmc/core/mmc_ops.h > @@ -17,6 +17,7 @@ int mmc_deselect_cards(struct mmc_host *host); > int mmc_go_idle(struct mmc_host *host); > int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr); > int mmc_all_send_cid(struct mmc_host *host, u32 *cid); > +int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status); > int mmc_set_relative_addr(struct mmc_card *card); > int mmc_send_csd(struct mmc_card *card, u32 *csd); > int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd); > diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h > index b460fc2..411054d 100644 > --- a/include/linux/mmc/card.h > +++ b/include/linux/mmc/card.h > @@ -64,10 +64,14 @@ struct mmc_ext_csd { > unsigned long long enhanced_area_offset; /* Units: Byte */ > unsigned int enhanced_area_size; /* Units: KB */ > unsigned int boot_size; /* in bytes */ > + bool hpi_en; /* HPI enablebit */ > + bool hpi; /* HPI support bit */ > + unsigned int hpi_cmd; /* cmd used as HPI */ > u8 raw_partition_support; /* 160 */ > u8 raw_erased_mem_count; /* 181 */ > u8 raw_ext_csd_structure; /* 194 */ > u8 raw_card_type; /* 196 */ > + u8 out_of_int_time; /* 198 */ > u8 raw_s_a_timeout; /* 217 */ > u8 raw_hc_erase_gap_size; /* 221 */ > u8 raw_erase_timeout_mult; /* 223 */ > diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h > index b8b1b7a..dca3c08 100644 > --- a/include/linux/mmc/core.h > +++ b/include/linux/mmc/core.h > @@ -136,6 +136,7 @@ struct mmc_async_req; > > extern struct mmc_async_req *mmc_start_req(struct mmc_host *, > struct mmc_async_req *, int *); > +extern int mmc_interrupt_hpi(struct mmc_card *); > extern void mmc_wait_for_req(struct mmc_host *, struct mmc_request *); > extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int); > extern int mmc_app_cmd(struct mmc_host *, struct mmc_card *); > diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h > index 5a794cb..e16c776 100644 > --- a/include/linux/mmc/mmc.h > +++ b/include/linux/mmc/mmc.h > @@ -272,6 +272,7 @@ struct _mmc_csd { > > #define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */ > #define EXT_CSD_PARTITION_SUPPORT 160 /* RO */ > +#define EXT_CSD_HPI_MGMT 161 /* R/W */ > #define EXT_CSD_WR_REL_PARAM 166 /* RO */ > #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */ > #define EXT_CSD_PART_CONFIG 179 /* R/W */ > @@ -281,6 +282,7 @@ struct _mmc_csd { > #define EXT_CSD_REV 192 /* RO */ > #define EXT_CSD_STRUCTURE 194 /* RO */ > #define EXT_CSD_CARD_TYPE 196 /* RO */ > +#define EXT_CSD_OUT_OF_INTERRUPT_TIME 198 /* RO */ > #define EXT_CSD_PART_SWITCH_TIME 199 /* RO */ > #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ > #define EXT_CSD_S_A_TIMEOUT 217 /* RO */ > @@ -293,6 +295,7 @@ struct _mmc_csd { > #define EXT_CSD_SEC_ERASE_MULT 230 /* RO */ > #define EXT_CSD_SEC_FEATURE_SUPPORT 231 /* RO */ > #define EXT_CSD_TRIM_MULT 232 /* RO */ > +#define EXT_CSD_HPI_FEATURES 503 /* RO */ > > /* > * EXT_CSD field definitions > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
