On Fri, July 6, 2012 9:47 am, Chris Ball wrote:
> Hi,
>
> On Fri, Jun 08 2012, Jaehoon Chung wrote:
>> Enable eMMC background operations (BKOPS) feature.
>>
>> If URGENT_BKOPS is set after a response, note that BKOPS
>> are required. After all I/O requests are finished, run
>> BKOPS if required. Should read/write operations be requested
>> during BKOPS, first issue HPI to interrupt the ongoing BKOPS
>> and then service the request.
>> If BKOPS-STATUS is upper than LEVEL2, need to check until clear
>> the BKOPS-STATUS vaule.
>>
>> If you want to enable this feature, set MMC_CAP2_BKOPS.
>> And if you want to set the BKOPS_EN bit in ext_csd register,
>> use the MMC_CAP2_INIT_BKOPS.
> [..]
>> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
>> index 0707d22..d23caf2 100644
>> --- a/include/linux/mmc/host.h
>> +++ b/include/linux/mmc/host.h
>> @@ -238,6 +238,8 @@ struct mmc_host {
>> #define MMC_CAP2_BROKEN_VOLTAGE (1 << 7) /* Use the broken
>> voltage */
>> #define MMC_CAP2_DETECT_ON_ERR (1 << 8) /* On I/O err check card
>> removal */
>> #define MMC_CAP2_HC_ERASE_SZ (1 << 9) /* High-capacity erase
>> size */
>> +#define MMC_CAP2_INIT_BKOPS (1 << 10) /* To enable BKOPS */
>> +#define MMC_CAP2_BKOPS (1 << 11) /* BKOPS supported */
>
> Can we have a better explanation of how these capabilities are supposed
> to be used, and why it's necessary to have two of them? Why would you
> set one but not the other?
>
> Thanks,
>
> - Chris.
> --
> Chris Ball <[email protected]> <http://printf.net/>
> One Laptop Per Child
>
I think MMC_CAP2_BKOPS should be removed. If the card BKOPs were already
enabled, the host must support BKOPs. Therefore, in mmc_start_bkops we
should check only if card->ext_csd.bkops_en is set.
Thanks,
Maya
--
Sent by consultant of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
