On 09/05/2012 04:46 AM, Thomas Abraham wrote: > Some platforms allow for clock gating and control of bus interface unit clock > and card interface unit clock. Add support for clock lookup of optional biu > and ciu clocks for clock gating and clock speed determination. > > Signed-off-by: Abhilash Kesavan <[email protected]> > Signed-off-by: Thomas Abraham <[email protected]> > Acked-by: Will Newton <[email protected]> > --- > drivers/mmc/host/dw_mmc.c | 50 +++++++++++++++++++++++++++++++++++++++++-- > include/linux/mmc/dw_mmc.h | 4 +++ > 2 files changed, 51 insertions(+), 3 deletions(-) > > diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c > index 227c42e..e8c8491 100644 > --- a/drivers/mmc/host/dw_mmc.c > +++ b/drivers/mmc/host/dw_mmc.c > @@ -1960,13 +1960,40 @@ int dw_mci_probe(struct dw_mci *host) > return -ENODEV; > } > > - if (!host->pdata->bus_hz) { > + host->biu_clk = clk_get(host->dev, "biu"); > + if (IS_ERR(host->biu_clk)) { > + dev_dbg(host->dev, "biu clock not available\n"); > + } else { > + ret = clk_prepare_enable(host->biu_clk); > + if (ret) { > + dev_err(host->dev, "failed to enable biu clock\n"); > + return ret; didn't clk_put() for biu_clk? > + } > + } > + > + host->ciu_clk = clk_get(host->dev, "ciu"); > + if (IS_ERR(host->ciu_clk)) { > + dev_dbg(host->dev, "ciu clock not available\n"); > + } else { > + ret = clk_prepare_enable(host->ciu_clk); > + if (ret) { > + dev_err(host->dev, "failed to enable ciu clock\n"); > + goto err_clk_biu; > + } > + } > + > + if (IS_ERR(host->ciu_clk)) > + host->bus_hz = host->pdata->bus_hz; > + else > + host->bus_hz = clk_get_rate(host->ciu_clk); > + > + if (!host->bus_hz) { > dev_err(host->dev, > "Platform data must supply bus speed\n"); > - return -ENODEV; > + ret = -ENODEV; > + goto err_clk_ciu; > } > > - host->bus_hz = host->pdata->bus_hz; > host->quirks = host->pdata->quirks; > > spin_lock_init(&host->lock); > @@ -2116,6 +2143,17 @@ err_dmaunmap: > regulator_disable(host->vmmc); > regulator_put(host->vmmc); > } > + > +err_clk_ciu: > + if (!IS_ERR(host->ciu_clk)) { > + clk_disable_unprepare(host->ciu_clk); > + clk_put(host->ciu_clk); > + } > +err_clk_biu: I think right that is located the clk_put(host->ciu_clk) at here > + if (!IS_ERR(host->biu_clk)) { > + clk_disable_unprepare(host->biu_clk); > + clk_put(host->biu_clk); > + } > return ret; > } > EXPORT_SYMBOL(dw_mci_probe); > @@ -2149,6 +2187,12 @@ void dw_mci_remove(struct dw_mci *host) > regulator_put(host->vmmc); > } > > + if (!IS_ERR(host->ciu_clk)) > + clk_disable_unprepare(host->ciu_clk); > + if (!IS_ERR(host->biu_clk)) > + clk_disable_unprepare(host->biu_clk); > + clk_put(host->ciu_clk); > + clk_put(host->biu_clk); > } > EXPORT_SYMBOL(dw_mci_remove); > > diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h > index a37a573..787ad56 100644 > --- a/include/linux/mmc/dw_mmc.h > +++ b/include/linux/mmc/dw_mmc.h > @@ -78,6 +78,8 @@ struct mmc_data; > * @data_offset: Set the offset of DATA register according to VERID. > * @dev: Device associated with the MMC controller. > * @pdata: Platform data associated with the MMC controller. > + * @biu_clk: Pointer to bus interface unit clock instance. > + * @ciu_clk: Pointer to card interface unit clock instance. > * @slot: Slots sharing this MMC controller. > * @fifo_depth: depth of FIFO. > * @data_shift: log2 of FIFO item size. > @@ -158,6 +160,8 @@ struct dw_mci { > u16 data_offset; > struct device *dev; > struct dw_mci_board *pdata; > + struct clk *biu_clk; > + struct clk *ciu_clk; > struct dw_mci_slot *slot[MAX_MCI_SLOTS]; > > /* FIFO push and pull */ >
-- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
