Hi Guennadi, thanks for replying so quickly,
On Mon, Sep 17 2012, Guennadi Liakhovetski wrote:
>> "present" is false because SDHCI_PRESENT_STATE doesn't have the presence
>> bit sent (if it did, we wouldn't need a cd-gpio, right?) and the command
>> fails.
>>
>> And we can't just set SDHCI_QUIRK_BROKEN_CARD_DETECTION, because that
>> would turn on polling, which we don't want. How's this supposed to work?
>
> Sorry, I'm not very familiar with the SDHCI hardware or the driver, so,
> I'll be speculating here.
>
> cd-gpio can function in two modes: polling and IRQ. IRQ is enabled if a
> number of conditions is satisfied: gpio_to_irq() returns a non-negative
> number, the user doesn't force polling by setting MMC_CAP_NEEDS_POLL and
> request(_threaded)_irq() is successful. If either of the three conditions
> fail, GPIO polling will be used.
Right, I'm in IRQ mode.
> Now, concerning SDHCI. cd-gpio doesn't magically make all MMC drivers
> capable of using GPIO card detection, sorry:-) To use it you should first
> make sure your driver can take card-present or card-detect information
> from a GPIO. Then the slot-gpio module shall be used to add this GPIO CD
> functionality to your driver instead of cooking it up by yourself.
>
> From the above it seems to me, that your SDHCI instance is not yet quite
> trained to take GPIO input for card-detection:-) Looking through various
> SDHCI implementations I see several drivers already implementing and using
> various GPIO slot services internally: tegra, spear, s3c, pci, esdhc-imx.
> They all seem to work with their own GPIO CD implementations, which are
> very similar to the slot-gpio one and it shouldn't be too difficult to
> replace them with the latter.
I'm using sdhci-pxav3, which is a small sdhci-pltfm driver.
I see now, thanks; what I was missing is that the other drivers are either:
* using IO accessors to fake the presence bit being set (esdhc-imx)
* using the ugly hack of just falling back to polling (s3c)
* running on a controller that doesn't have this problem (tegra?)
So the answer to "how's this supposed to work?" was "your driver needs
a workaround for reporting the presence bit", I guess. Hopefully making
the change below should let us remove this unnecessary code from
esdhc-imx and s3c.
> Concerning how specifically it should work in your case - I'm not sure,
> sorry. What platform are you working with? Does it already have GPIO
> support? If it did, it should have been pretty simple to replace it with
> the generic one from slot-gpio. Looking at the code, it seems to me, that
> even on SDHCI systems, where a GPIO is used for card detection, the
> controller is sometimes still able to recognise the card's presence. This
> seems to be the case on tegra, pci (except cafe),... However, e.g., s3c
> uses a dirty hack of setting and clearing
> SDHCI_QUIRK_BROKEN_CARD_DETECTION in their CD routine... In general, I
> think, it should suffice to do in sdhci_request() (and others) something
> like
>
> /* If polling, assume that the card is always present. */
> if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
> present = true;
> else
> present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
> SDHCI_CARD_PRESENT;
>
> if (!present) {
> int ret = mmc_gpio_get_cd(host->mmc);
> if (ret > 0)
> present = true;
> }
Makes sense, and works fine. I'll prepare a formal patch and send it
out now -- please could you reply with your Signed-off-by, since I'll
put you in the From field?
> Also, once a card has been detected, shouldn't it be possible to use
> mmc_card_present() to check its presence?
Sounds right, although that happens too late to help here.
Thanks very much!
- Chris.
--
Chris Ball <[email protected]> <http://printf.net/>
One Laptop Per Child
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
