This enables access the actual_clock via sys. root@imx6qsabreauto:~# cat /sys/kernel/debug/mmc0/ios clock: 198000000 Hz actual clock: 198000000 Hz vdd: 17 (2.9 ~ 3.0 V) bus mode: 2 (push-pull) chip select: 0 (don't care) power mode: 2 (on) bus width: 2 (4 bits) timing spec: 6 (sd uhs SDR104) signal voltage: 0 (1.80 V)
Signed-off-by: Dong Aisheng <[email protected]> --- drivers/mmc/host/sdhci-esdhc-imx.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index fe48ec3..b9899e9 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -524,8 +524,9 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host, while (host_clock / pre_div / div > clock && div < 16) div++; + host->mmc->actual_clock = host_clock / pre_div / div; dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n", - clock, host_clock / pre_div / div); + clock, host->mmc->actual_clock); pre_div >>= 1; div--; -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
