This is needed for supporting ultra high speed cards like SD3.0 cards.
Signed-off-by: Dong Aisheng <[email protected]>
---
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 5 ++++-
arch/arm/boot/dts/imx6qdl.dtsi | 30 ++++++++++++++++++++++++++++++
2 files changed, 34 insertions(+), 1 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 1cbbc51..ff6f1e8 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -54,6 +54,7 @@
fsl,pins = <
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x80000000
+ MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059
>;
};
};
@@ -74,8 +75,10 @@
};
&usdhc3 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3_1>;
+ pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>;
cd-gpios = <&gpio6 15 0>;
wp-gpios = <&gpio1 13 0>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index ccd55c2..cb17574 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -1184,6 +1184,36 @@
>;
};
+ pinctrl_usdhc3_1_100mhz:
usdhc3grp-1-100mhz { /* 100Mhz */
+ fsl,pins = <
+
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B9
+
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100B9
+
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170B9
+
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170B9
+
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170B9
+
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170B9
+
MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170B9
+
MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170B9
+
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170B9
+
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170B9
+ >;
+ };
+
+ pinctrl_usdhc3_1_200mhz:
usdhc3grp-1-200mhz { /* 200Mhz */
+ fsl,pins = <
+
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170F9
+
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100F9
+
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170F9
+
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170F9
+
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170F9
+
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170F9
+
MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170F9
+
MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170F9
+
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170F9
+
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170F9
+ >;
+ };
+
pinctrl_usdhc3_2: usdhc3grp-2 {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
