On Fri, 2014-03-28 at 21:32 +0900, Seungwon Jeon wrote:
> Hi Dinh,
>
> On Fri, March 28, 2014, Dinh Nguyen wrote:
> > From: Dinh Nguyen <[email protected]>
> >
> > commits [90c2143a8f mmc: dw_mmc: guarantee stop-abort cmd in data errors]
> > and [e352c813110 mmc: dw_mmc: rework the code related to cmd/data
> > completion]
> > cause the SD/MMC DMA interface to stop working on Kingston brand SD cards.
> >
> > ---
> > Hi Seungwon,
> >
> > I am seeing this error on v3.13 kernel of the dw_mmc driver:
> >
> > mmc0: problem reading SD Status register.
> > mmc0: error -110 whilst initialising SD card
> >
> > I only see this error on a Kingston brand card, although I have heard
> > reports
> > that it also fails a Samsung card. Also it only fails when with
> > CONFIG_MMC_DW_IDMAC=y.
> >
> > The patch below seems to fix it for me. Any chance you have seen this error?
> I didn't see but I'll try to find it.
> And do you have any analysis for this issue?
Thanks. Here's the debug output that I am seeing.
With patch applied:
[ 2.503394] mmc0: req done (CMD51): 0: 00000920 00000000 00000000
00000000
[ 2.510239] mmc0: 8 bytes transferred: 0
[ 2.514519] mmc0: starting CMD55 arg 00070000 flags 00000095
[ 2.520452] mmc0: req done (CMD55): 0: 00000920 00000000 00000000
00000000
[ 2.527324] mmc0: starting CMD13 arg 00000000 flags 000001b5
[ 2.532974] mmc0: blksz 64 blocks 1 flags 00000200 tsac 100 ms
nsac 0
[ 2.541526] dwmmc_socfpga ff704000.dwmmc0: data error, status
0x00000800
[ 2.548203] mmc0: req done (CMD13): 0: 00000920 00000000 00000000
00000000
[ 2.555057] mmc0: 0 bytes transferred: -5
[ 2.559410] mmc0: problem reading SD Status register.
[ 2.564459] mmc0: starting CMD6 arg 00fffff0 flags 000000b5
[ 2.570008] mmc0: blksz 64 blocks 1 flags 00000200 tsac 100 ms
nsac 0
[ 2.578703] mmc0: req done (CMD6): 0: 00000900 00000000 00000000
00000000
[ 2.585471] mmc0: 64 bytes transferred: 0
[ 2.589829] mmc_host mmc0: card is read-write
[ 2.594182] mmc0: starting CMD6 arg 80fffff1 flags 000000b5
[ 2.599733] mmc0: blksz 64 blocks 1 flags 00000200 tsac 100 ms
nsac 0
[ 2.609308] mmc0: req done (CMD6): 0: 00000900 00000000 00000000
00000000
[ 2.616076] mmc0: 64 bytes transferred: 0
[ 2.620434] mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21
width 0 timing 2
[ 2.628076] mmc0: clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 21
width 0 timing 2
Without patch:
[ 2.503381] mmc0: req done (CMD51): 0: 00000920 00000000 00000000
00000000
[ 2.510226] mmc0: 8 bytes transferred: 0
[ 2.514505] mmc0: starting CMD55 arg 00070000 flags 00000095
[ 2.520437] mmc0: req done (CMD55): 0: 00000920 00000000 00000000
00000000
[ 2.527309] mmc0: starting CMD13 arg 00000000 flags 000001b5
[ 2.532960] mmc0: blksz 64 blocks 1 flags 00000200 tsac 100 ms
nsac 0
[ 2.541509] dwmmc_socfpga ff704000.dwmmc0: data error, status
0x00000080
[ 2.548185] mmc0: req done (CMD13): 0: 00000920 00000000 00000000
00000000
[ 2.555038] mmc0: 0 bytes transferred: -84
[ 2.559477] mmc0: problem reading SD Status register.
[ 2.564528] mmc0: starting CMD6 arg 00fffff0 flags 000000b5
[ 2.570078] mmc0: blksz 64 blocks 1 flags 00000200 tsac 100 ms
nsac 0
[ 2.577814] mmc0: req done (CMD6): -110: 00000920 00000000 00000000
00000000
[ 2.584841] mmc0: 0 bytes transferred: -115
[ 2.589375] mmc0: error -110 whilst initialising SD card
>
> >
> > Dinh
> > ---
> > drivers/mmc/host/dw_mmc.c | 8 +++++++-
> > 1 file changed, 7 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> > index 7833002..7dcaa30 100644
> > --- a/drivers/mmc/host/dw_mmc.c
> > +++ b/drivers/mmc/host/dw_mmc.c
> > @@ -1312,7 +1312,8 @@ static void dw_mci_tasklet_func(unsigned long priv)
> > if (test_and_clear_bit(EVENT_DATA_ERROR,
> > &host->pending_events)) {
> > dw_mci_stop_dma(host);
> > - send_stop_abort(host, data);
> > + if (data->stop)
> > + send_stop_abort(host, data);
> This routine is for error handing.
> Is it effective to detect card normally?
>
Yes, detecting the card works fine.
Thanks,
Dinh
> Thanks,
> Seungwon Jeon
>
> > state = STATE_DATA_ERROR;
> > break;
> > }
> > @@ -1334,6 +1335,11 @@ static void dw_mci_tasklet_func(unsigned long priv)
> > set_bit(EVENT_DATA_COMPLETE, &host->completed_events);
> > err = dw_mci_data_complete(host, data);
> >
> > + if (!data->stop) {
> > + dw_mci_request_end(host, host->mrq);
> > + goto unlock;
> > + }
> > +
> > if (!err) {
> > if (!data->stop || mrq->sbc) {
> > if (mrq->sbc)
> > --
> > 1.7.9.5
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> > the body of a message to [email protected]
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
