Hi, Dinh.
On 03/29/2014 12:53 AM, Dinh Nguyen wrote:
> On Fri, 2014-03-28 at 21:32 +0900, Seungwon Jeon wrote:
>> Hi Dinh,
>>
>> On Fri, March 28, 2014, Dinh Nguyen wrote:
>>> From: Dinh Nguyen <[email protected]>
>>>
>>> commits [90c2143a8f mmc: dw_mmc: guarantee stop-abort cmd in data errors]
>>> and [e352c813110 mmc: dw_mmc: rework the code related to cmd/data
>>> completion]
>>> cause the SD/MMC DMA interface to stop working on Kingston brand SD cards.
>>>
>>> ---
>>> Hi Seungwon,
>>>
>>> I am seeing this error on v3.13 kernel of the dw_mmc driver:
>>>
>>> mmc0: problem reading SD Status register.
>>> mmc0: error -110 whilst initialising SD card
>>>
>>> I only see this error on a Kingston brand card, although I have heard
>>> reports
>>> that it also fails a Samsung card. Also it only fails when with
>>> CONFIG_MMC_DW_IDMAC=y.
>>>
>>> The patch below seems to fix it for me. Any chance you have seen this error?
>> I didn't see but I'll try to find it.
>> And do you have any analysis for this issue?
>
> Thanks. Here's the debug output that I am seeing.
I didn't know what difference is "without patch" and "with patch".
Is it always occurred the data-error?
I didn't find this issue yet. Did you fix it without applied patch?
Best Regards,
Jaehoon Chung
>
> With patch applied:
>
> [ 2.503394] mmc0: req done (CMD51): 0: 00000920 00000000 00000000
> 00000000
> [ 2.510239] mmc0: 8 bytes transferred: 0
> [ 2.514519] mmc0: starting CMD55 arg 00070000 flags 00000095
> [ 2.520452] mmc0: req done (CMD55): 0: 00000920 00000000 00000000
> 00000000
> [ 2.527324] mmc0: starting CMD13 arg 00000000 flags 000001b5
> [ 2.532974] mmc0: blksz 64 blocks 1 flags 00000200 tsac 100 ms
> nsac 0
> [ 2.541526] dwmmc_socfpga ff704000.dwmmc0: data error, status
> 0x00000800
> [ 2.548203] mmc0: req done (CMD13): 0: 00000920 00000000 00000000
> 00000000
> [ 2.555057] mmc0: 0 bytes transferred: -5
> [ 2.559410] mmc0: problem reading SD Status register.
> [ 2.564459] mmc0: starting CMD6 arg 00fffff0 flags 000000b5
> [ 2.570008] mmc0: blksz 64 blocks 1 flags 00000200 tsac 100 ms
> nsac 0
> [ 2.578703] mmc0: req done (CMD6): 0: 00000900 00000000 00000000
> 00000000
> [ 2.585471] mmc0: 64 bytes transferred: 0
> [ 2.589829] mmc_host mmc0: card is read-write
> [ 2.594182] mmc0: starting CMD6 arg 80fffff1 flags 000000b5
> [ 2.599733] mmc0: blksz 64 blocks 1 flags 00000200 tsac 100 ms
> nsac 0
> [ 2.609308] mmc0: req done (CMD6): 0: 00000900 00000000 00000000
> 00000000
> [ 2.616076] mmc0: 64 bytes transferred: 0
> [ 2.620434] mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21
> width 0 timing 2
> [ 2.628076] mmc0: clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 21
> width 0 timing 2
>
>
> Without patch:
>
> [ 2.503381] mmc0: req done (CMD51): 0: 00000920 00000000 00000000
> 00000000
> [ 2.510226] mmc0: 8 bytes transferred: 0
> [ 2.514505] mmc0: starting CMD55 arg 00070000 flags 00000095
> [ 2.520437] mmc0: req done (CMD55): 0: 00000920 00000000 00000000
> 00000000
> [ 2.527309] mmc0: starting CMD13 arg 00000000 flags 000001b5
> [ 2.532960] mmc0: blksz 64 blocks 1 flags 00000200 tsac 100 ms
> nsac 0
> [ 2.541509] dwmmc_socfpga ff704000.dwmmc0: data error, status
> 0x00000080
> [ 2.548185] mmc0: req done (CMD13): 0: 00000920 00000000 00000000
> 00000000
> [ 2.555038] mmc0: 0 bytes transferred: -84
> [ 2.559477] mmc0: problem reading SD Status register.
> [ 2.564528] mmc0: starting CMD6 arg 00fffff0 flags 000000b5
> [ 2.570078] mmc0: blksz 64 blocks 1 flags 00000200 tsac 100 ms
> nsac 0
> [ 2.577814] mmc0: req done (CMD6): -110: 00000920 00000000 00000000
> 00000000
> [ 2.584841] mmc0: 0 bytes transferred: -115
> [ 2.589375] mmc0: error -110 whilst initialising SD card
>
>
>>
>>>
>>> Dinh
>>> ---
>>> drivers/mmc/host/dw_mmc.c | 8 +++++++-
>>> 1 file changed, 7 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>>> index 7833002..7dcaa30 100644
>>> --- a/drivers/mmc/host/dw_mmc.c
>>> +++ b/drivers/mmc/host/dw_mmc.c
>>> @@ -1312,7 +1312,8 @@ static void dw_mci_tasklet_func(unsigned long priv)
>>> if (test_and_clear_bit(EVENT_DATA_ERROR,
>>> &host->pending_events)) {
>>> dw_mci_stop_dma(host);
>>> - send_stop_abort(host, data);
>>> + if (data->stop)
>>> + send_stop_abort(host, data);
>> This routine is for error handing.
>> Is it effective to detect card normally?
>>
>
> Yes, detecting the card works fine.
>
> Thanks,
> Dinh
>> Thanks,
>> Seungwon Jeon
>>
>>> state = STATE_DATA_ERROR;
>>> break;
>>> }
>>> @@ -1334,6 +1335,11 @@ static void dw_mci_tasklet_func(unsigned long priv)
>>> set_bit(EVENT_DATA_COMPLETE, &host->completed_events);
>>> err = dw_mci_data_complete(host, data);
>>>
>>> + if (!data->stop) {
>>> + dw_mci_request_end(host, host->mrq);
>>> + goto unlock;
>>> + }
>>> +
>>> if (!err) {
>>> if (!data->stop || mrq->sbc) {
>>> if (mrq->sbc)
>>> --
>>> 1.7.9.5
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>>> the body of a message to [email protected]
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
