> -----Original Message----- > From: Petr Pavlu <[email protected]> > Sent: Friday, October 2, 2026 10:31 AM > To: Wim Van Sebroeck <[email protected]>; Guenter Roeck > <[email protected]>; Ian Abbott <[email protected]>; H Hartley > Sweeten <[email protected]>; Maarten Lankhorst > <[email protected]>; Maxime Ripard > <[email protected]>; Thomas Zimmermann <[email protected]>; David > Airlie <[email protected]>; Simona Vetter <[email protected]>; Rudolf > Marek <[email protected]>; Andi Shyti <[email protected]>; > Chris Snook <[email protected]>; Andrew Lunn > <[email protected]>; David S. Miller <[email protected]>; Eric > Dumazet <[email protected]>; Jakub Kicinski <[email protected]>; Paolo > Abeni <[email protected]>; Nguyen, Anthony L > <[email protected]>; Kitszel, Przemyslaw > <[email protected]>; Marek Behún <[email protected]>; > Alexandre Belloni <[email protected]>; Andreas Noever > <[email protected]>; Mika Westerberg <[email protected]>; > Yehezkel Bernat <[email protected]>; Greg Kroah-Hartman > <[email protected]>; Jiri Slaby <[email protected]>; > Duncan Sands <[email protected]>; Chas Williams <[email protected]>; > Luis Chamberlain <[email protected]>; Petr Pavlu > <[email protected]>; Daniel Gomez <[email protected]>; Sami > Tolvanen <[email protected]>; Aaron Tomlin <[email protected]> > Cc: Wolfram Sang <[email protected]>; linux- > [email protected]; [email protected]; linux- > [email protected]; [email protected]; > [email protected]; [email protected]; linux- > [email protected]; [email protected]; linux- > [email protected]; [email protected]; > [email protected]; [email protected] > Subject: [PATCH v2 2/3] drivers: Replace __MODULE_STRING() with > __stringify() > > __MODULE_STRING() has been an alias for __stringify() since "[PATCH] > MODULE_PARM support for older modules" [1] in 2002-12. That change > also moved it to the graveyard section at the end of linux/module.h > > Replace the remaining uses of __MODULE_STRING() with __stringify() in > preparation for its removal. > > Link: https://git.kernel.org/tglx/history/c/136839a1b4 [1] > Acked-by: Greg Kroah-Hartman <[email protected]> > Acked-by: Andi Shyti <[email protected]> > Acked-by: Ian Abbott <[email protected]> > Acked-by: Alexandre Belloni <[email protected]> > Signed-off-by: Petr Pavlu <[email protected]> > --- > drivers/comedi/comedi_fops.c | 5 +++-- > drivers/gpu/drm/drm_fb_helper.c | 3 ++- > drivers/i2c/busses/i2c-kempld.c | 3 ++- > drivers/net/ethernet/atheros/atl1e/atl1e_param.c | 9 +++++---- > drivers/net/ethernet/atheros/atlx/atl1.c | 3 ++- > drivers/net/ethernet/atheros/atlx/atl2.c | 11 ++++++---- > - > drivers/net/ethernet/intel/e1000/e1000_param.c | 15 ++++++++-- > ----- > drivers/net/ethernet/intel/e1000e/param.c | 16 ++++++---- > ------ > drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c | 7 ++++--- > drivers/platform/cznic/turris-omnia-mcu-watchdog.c | 3 ++- > drivers/rtc/rtc-ds1374.c | 3 ++- > drivers/thunderbolt/tb.c | 3 ++- > drivers/thunderbolt/tunnel.c | 5 +++-- > drivers/tty/serial/8250/8250_platform.c | 3 ++- > drivers/usb/atm/speedtch.c | 15 ++++++++-- > ----- > drivers/usb/atm/usbatm.c | 17 +++++++++- > ------- > 16 files changed, 66 insertions(+), 55 deletions(-) > > diff --git a/drivers/comedi/comedi_fops.c > b/drivers/comedi/comedi_fops.c index c09bbe04be6c..05d14839c5a6 100644 > --- a/drivers/comedi/comedi_fops.c > +++ b/drivers/comedi/comedi_fops.c > @@ -29,6 +29,7 @@ > #include <linux/io.h> > #include <linux/uaccess.h> > #include <linux/compat.h> > +#include <linux/stringify.h> > > #include "comedi_internal.h" > > @@ -82,14 +83,14 @@ unsigned int comedi_default_buf_size_kb = > CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB; > module_param(comedi_default_buf_size_kb, uint, 0644); > MODULE_PARM_DESC(comedi_default_buf_size_kb, > "default asynchronous buffer size in KiB (default " > - __MODULE_STRING(CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB) > ")"); > + __stringify(CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB) ")"); > > unsigned int comedi_default_buf_maxsize_kb = > CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB; > module_param(comedi_default_buf_maxsize_kb, uint, 0644); > MODULE_PARM_DESC(comedi_default_buf_maxsize_kb, > "default maximum size of asynchronous buffer in KiB > (default " > - __MODULE_STRING(CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB) > ")"); > + __stringify(CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB) ")"); > > static DEFINE_MUTEX(comedi_board_minor_table_lock); > static struct comedi_device > diff --git a/drivers/gpu/drm/drm_fb_helper.c > b/drivers/gpu/drm/drm_fb_helper.c index d4664ed468b2..36009bb02c25 > 100644 > --- a/drivers/gpu/drm/drm_fb_helper.c > +++ b/drivers/gpu/drm/drm_fb_helper.c > @@ -31,6 +31,7 @@ > > #include <linux/console.h> > #include <linux/export.h> > +#include <linux/stringify.h> > > #include <drm/drm_atomic.h> > #include <drm/drm_drv.h> > @@ -54,7 +55,7 @@ static int drm_fbdev_overalloc = > CONFIG_DRM_FBDEV_OVERALLOC; module_param(drm_fbdev_overalloc, int, > 0444); MODULE_PARM_DESC(drm_fbdev_overalloc, > "Overallocation of the fbdev buffer (%) [default=" > - __MODULE_STRING(CONFIG_DRM_FBDEV_OVERALLOC) "]"); > + __stringify(CONFIG_DRM_FBDEV_OVERALLOC) "]"); > > /* > * In order to keep user-space compatibility, we want in certain use- > cases diff --git a/drivers/i2c/busses/i2c-kempld.c > b/drivers/i2c/busses/i2c-kempld.c index 9b4c7cba62b6..d0438960c272 > 100644 > --- a/drivers/i2c/busses/i2c-kempld.c > +++ b/drivers/i2c/busses/i2c-kempld.c > @@ -13,6 +13,7 @@ > #include <linux/i2c.h> > #include <linux/delay.h> > #include <linux/mfd/kempld.h> > +#include <linux/stringify.h> > > #define KEMPLD_I2C_PRELOW 0x0b > #define KEMPLD_I2C_PREHIGH 0x0c > @@ -66,7 +67,7 @@ struct kempld_i2c_data { static unsigned int > bus_frequency = KEMPLD_I2C_FREQ_STD; module_param(bus_frequency, > uint, 0); MODULE_PARM_DESC(bus_frequency, "Set I2C bus frequency in > kHz (default=" > - __MODULE_STRING(KEMPLD_I2C_FREQ_STD)")"); > + __stringify(KEMPLD_I2C_FREQ_STD)")"); > > static int i2c_bus = -1; > module_param(i2c_bus, int, 0); > diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_param.c > b/drivers/net/ethernet/atheros/atl1e/atl1e_param.c > index 6b1d6df8da97..ff3423a4dc2e 100644 > --- a/drivers/net/ethernet/atheros/atl1e/atl1e_param.c > +++ b/drivers/net/ethernet/atheros/atl1e/atl1e_param.c > @@ -7,6 +7,7 @@ > */ > > #include <linux/netdevice.h> > +#include <linux/stringify.h> > > #include "atl1e.h" > > @@ -181,7 +182,7 @@ void atl1e_check_options(struct atl1e_adapter > *adapter) > .type = range_option, > .name = "Transmit Ddescription Count", > .err = "using default of " > - __MODULE_STRING(ATL1E_DEFAULT_TX_DESC_CNT), > + __stringify(ATL1E_DEFAULT_TX_DESC_CNT), > .def = ATL1E_DEFAULT_TX_DESC_CNT, > .arg = { .r = { .min = ATL1E_MIN_TX_DESC_CNT, > .max = ATL1E_MAX_TX_DESC_CNT} } > @@ -200,7 +201,7 @@ void atl1e_check_options(struct atl1e_adapter > *adapter) > .type = range_option, > .name = "Memory size of rx buffer(KB)", > .err = "using default of " > - __MODULE_STRING(ATL1E_DEFAULT_RX_MEM_SIZE), > + __stringify(ATL1E_DEFAULT_RX_MEM_SIZE), > .def = ATL1E_DEFAULT_RX_MEM_SIZE, > .arg = { .r = { .min = ATL1E_MIN_RX_MEM_SIZE, > .max = ATL1E_MAX_RX_MEM_SIZE} } > @@ -220,7 +221,7 @@ void atl1e_check_options(struct atl1e_adapter > *adapter) > .type = range_option, > .name = "Interrupt Moderate Timer", > .err = "using default of " > - __MODULE_STRING(INT_MOD_DEFAULT_CNT), > + __stringify(INT_MOD_DEFAULT_CNT), > .def = INT_MOD_DEFAULT_CNT, > .arg = { .r = { .min = INT_MOD_MIN_CNT, > .max = INT_MOD_MAX_CNT} } > @@ -239,7 +240,7 @@ void atl1e_check_options(struct atl1e_adapter > *adapter) > .type = range_option, > .name = "Speed/Duplex Selection", > .err = "using default of " > - __MODULE_STRING(MEDIA_TYPE_AUTO_SENSOR), > + __stringify(MEDIA_TYPE_AUTO_SENSOR), > .def = MEDIA_TYPE_AUTO_SENSOR, > .arg = { .r = { .min = MEDIA_TYPE_AUTO_SENSOR, > .max = MEDIA_TYPE_10M_HALF} } > diff --git a/drivers/net/ethernet/atheros/atlx/atl1.c > b/drivers/net/ethernet/atheros/atlx/atl1.c > index a981c4bcf8ed..2883e9462f6f 100644 > --- a/drivers/net/ethernet/atheros/atlx/atl1.c > +++ b/drivers/net/ethernet/atheros/atlx/atl1.c > @@ -56,6 +56,7 @@ > #include <linux/slab.h> > #include <linux/spinlock.h> > #include <linux/string.h> > +#include <linux/stringify.h> > #include <linux/tcp.h> > #include <linux/timer.h> > #include <linux/types.h> > @@ -198,7 +199,7 @@ static void atl1_check_options(struct atl1_adapter > *adapter) > .type = range_option, > .name = "Interrupt Moderator Timer", > .err = "using default of " > - __MODULE_STRING(DEFAULT_INT_MOD_CNT), > + __stringify(DEFAULT_INT_MOD_CNT), > .def = DEFAULT_INT_MOD_CNT, > .arg = {.r = {.min = MIN_INT_MOD_CNT, > .max = MAX_INT_MOD_CNT} } > diff --git a/drivers/net/ethernet/atheros/atlx/atl2.c > b/drivers/net/ethernet/atheros/atlx/atl2.c > index c9aca219ec9c..5d3b3357d53d 100644 > --- a/drivers/net/ethernet/atheros/atlx/atl2.c > +++ b/drivers/net/ethernet/atheros/atlx/atl2.c > @@ -29,6 +29,7 @@ > #include <linux/slab.h> > #include <linux/spinlock.h> > #include <linux/string.h> > +#include <linux/stringify.h> > #include <linux/tcp.h> > #include <linux/timer.h> > #include <linux/types.h> > @@ -2921,7 +2922,7 @@ static void atl2_check_options(struct > atl2_adapter *adapter) > /* Bytes of Transmit Memory */ > opt.type = range_option; > opt.name = "Bytes of Transmit Memory"; > - opt.err = "using default of " > __MODULE_STRING(ATL2_DEFAULT_TX_MEMSIZE); > + opt.err = "using default of " > __stringify(ATL2_DEFAULT_TX_MEMSIZE); > opt.def = ATL2_DEFAULT_TX_MEMSIZE; > opt.arg.r.min = ATL2_MIN_TX_MEMSIZE; > opt.arg.r.max = ATL2_MAX_TX_MEMSIZE; > @@ -2939,7 +2940,7 @@ static void atl2_check_options(struct > atl2_adapter *adapter) > /* Receive Memory Block Count */ > opt.type = range_option; > opt.name = "Number of receive memory block"; > - opt.err = "using default of " > __MODULE_STRING(ATL2_DEFAULT_RXD_COUNT); > + opt.err = "using default of " > __stringify(ATL2_DEFAULT_RXD_COUNT); > opt.def = ATL2_DEFAULT_RXD_COUNT; > opt.arg.r.min = ATL2_MIN_RXD_COUNT; > opt.arg.r.max = ATL2_MAX_RXD_COUNT; > @@ -2960,7 +2961,7 @@ static void atl2_check_options(struct > atl2_adapter *adapter) > /* Interrupt Moderate Timer */ > opt.type = range_option; > opt.name = "Interrupt Moderate Timer"; > - opt.err = "using default of " > __MODULE_STRING(INT_MOD_DEFAULT_CNT); > + opt.err = "using default of " __stringify(INT_MOD_DEFAULT_CNT); > opt.def = INT_MOD_DEFAULT_CNT; > opt.arg.r.min = INT_MOD_MIN_CNT; > opt.arg.r.max = INT_MOD_MAX_CNT; > @@ -2973,7 +2974,7 @@ static void atl2_check_options(struct > atl2_adapter *adapter) > /* Flash Vendor */ > opt.type = range_option; > opt.name = "SPI Flash Vendor"; > - opt.err = "using default of " > __MODULE_STRING(FLASH_VENDOR_DEFAULT); > + opt.err = "using default of " > __stringify(FLASH_VENDOR_DEFAULT); > opt.def = FLASH_VENDOR_DEFAULT; > opt.arg.r.min = FLASH_VENDOR_MIN; > opt.arg.r.max = FLASH_VENDOR_MAX; > @@ -2986,7 +2987,7 @@ static void atl2_check_options(struct > atl2_adapter *adapter) > /* MediaType */ > opt.type = range_option; > opt.name = "Speed/Duplex Selection"; > - opt.err = "using default of " > __MODULE_STRING(MEDIA_TYPE_AUTO_SENSOR); > + opt.err = "using default of " > __stringify(MEDIA_TYPE_AUTO_SENSOR); > opt.def = MEDIA_TYPE_AUTO_SENSOR; > opt.arg.r.min = MEDIA_TYPE_AUTO_SENSOR; > opt.arg.r.max = MEDIA_TYPE_10M_HALF; > diff --git a/drivers/net/ethernet/intel/e1000/e1000_param.c > b/drivers/net/ethernet/intel/e1000/e1000_param.c > index f4154ca7fcb4..5faf6d6280c8 100644 > --- a/drivers/net/ethernet/intel/e1000/e1000_param.c > +++ b/drivers/net/ethernet/intel/e1000/e1000_param.c > @@ -1,6 +1,7 @@ > // SPDX-License-Identifier: GPL-2.0 > /* Copyright(c) 1999 - 2006 Intel Corporation. */ > > +#include <linux/stringify.h> > #include "e1000.h" > > /* This is the only thing that needs to be changed to adjust the @@ - > 259,7 +260,7 @@ void e1000_check_options(struct e1000_adapter > *adapter) > .type = range_option, > .name = "Transmit Descriptors", > .err = "using default of " > - __MODULE_STRING(E1000_DEFAULT_TXD), > + __stringify(E1000_DEFAULT_TXD), > .def = E1000_DEFAULT_TXD, > .arg = { .r = { > .min = E1000_MIN_TXD, > @@ -287,7 +288,7 @@ void e1000_check_options(struct e1000_adapter > *adapter) > .type = range_option, > .name = "Receive Descriptors", > .err = "using default of " > - __MODULE_STRING(E1000_DEFAULT_RXD), > + __stringify(E1000_DEFAULT_RXD), > .def = E1000_DEFAULT_RXD, > .arg = { .r = { > .min = E1000_MIN_RXD, > @@ -354,7 +355,7 @@ void e1000_check_options(struct e1000_adapter > *adapter) > opt = (struct e1000_option) { > .type = range_option, > .name = "Transmit Interrupt Delay", > - .err = "using default of " > __MODULE_STRING(DEFAULT_TIDV), > + .err = "using default of " > __stringify(DEFAULT_TIDV), > .def = DEFAULT_TIDV, > .arg = { .r = { .min = MIN_TXDELAY, > .max = MAX_TXDELAY }} > @@ -372,7 +373,7 @@ void e1000_check_options(struct e1000_adapter > *adapter) > opt = (struct e1000_option) { > .type = range_option, > .name = "Transmit Absolute Interrupt Delay", > - .err = "using default of " > __MODULE_STRING(DEFAULT_TADV), > + .err = "using default of " > __stringify(DEFAULT_TADV), > .def = DEFAULT_TADV, > .arg = { .r = { .min = MIN_TXABSDELAY, > .max = MAX_TXABSDELAY }} > @@ -390,7 +391,7 @@ void e1000_check_options(struct e1000_adapter > *adapter) > opt = (struct e1000_option) { > .type = range_option, > .name = "Receive Interrupt Delay", > - .err = "using default of " > __MODULE_STRING(DEFAULT_RDTR), > + .err = "using default of " > __stringify(DEFAULT_RDTR), > .def = DEFAULT_RDTR, > .arg = { .r = { .min = MIN_RXDELAY, > .max = MAX_RXDELAY }} > @@ -408,7 +409,7 @@ void e1000_check_options(struct e1000_adapter > *adapter) > opt = (struct e1000_option) { > .type = range_option, > .name = "Receive Absolute Interrupt Delay", > - .err = "using default of " > __MODULE_STRING(DEFAULT_RADV), > + .err = "using default of " > __stringify(DEFAULT_RADV), > .def = DEFAULT_RADV, > .arg = { .r = { .min = MIN_RXABSDELAY, > .max = MAX_RXABSDELAY }} > @@ -426,7 +427,7 @@ void e1000_check_options(struct e1000_adapter > *adapter) > opt = (struct e1000_option) { > .type = range_option, > .name = "Interrupt Throttling Rate (ints/sec)", > - .err = "using default of " > __MODULE_STRING(DEFAULT_ITR), > + .err = "using default of " > __stringify(DEFAULT_ITR), > .def = DEFAULT_ITR, > .arg = { .r = { .min = MIN_ITR, > .max = MAX_ITR }} > diff --git a/drivers/net/ethernet/intel/e1000e/param.c > b/drivers/net/ethernet/intel/e1000e/param.c > index 3132d8f2f207..c6f400e6cdea 100644 > --- a/drivers/net/ethernet/intel/e1000e/param.c > +++ b/drivers/net/ethernet/intel/e1000e/param.c > @@ -4,6 +4,7 @@ > #include <linux/netdevice.h> > #include <linux/module.h> > #include <linux/pci.h> > +#include <linux/stringify.h> > > #include "e1000.h" > > @@ -238,8 +239,7 @@ void e1000e_check_options(struct e1000_adapter > *adapter) > static const struct e1000_option opt = { > .type = range_option, > .name = "Transmit Interrupt Delay", > - .err = "using default of " > - __MODULE_STRING(DEFAULT_TIDV), > + .err = "using default of " > __stringify(DEFAULT_TIDV), > .def = DEFAULT_TIDV, > .arg = { .r = { .min = MIN_TXDELAY, > .max = MAX_TXDELAY } } > @@ -258,8 +258,7 @@ void e1000e_check_options(struct e1000_adapter > *adapter) > static const struct e1000_option opt = { > .type = range_option, > .name = "Transmit Absolute Interrupt Delay", > - .err = "using default of " > - __MODULE_STRING(DEFAULT_TADV), > + .err = "using default of " > __stringify(DEFAULT_TADV), > .def = DEFAULT_TADV, > .arg = { .r = { .min = MIN_TXABSDELAY, > .max = MAX_TXABSDELAY } } > @@ -278,8 +277,7 @@ void e1000e_check_options(struct e1000_adapter > *adapter) > static struct e1000_option opt = { > .type = range_option, > .name = "Receive Interrupt Delay", > - .err = "using default of " > - __MODULE_STRING(DEFAULT_RDTR), > + .err = "using default of " > __stringify(DEFAULT_RDTR), > .def = DEFAULT_RDTR, > .arg = { .r = { .min = MIN_RXDELAY, > .max = MAX_RXDELAY } } > @@ -301,8 +299,7 @@ void e1000e_check_options(struct e1000_adapter > *adapter) > static struct e1000_option opt = { > .type = range_option, > .name = "Receive Absolute Interrupt Delay", > - .err = "using default of " > - __MODULE_STRING(DEFAULT_RADV), > + .err = "using default of " > __stringify(DEFAULT_RADV), > .def = DEFAULT_RADV, > .arg = { .r = { .min = MIN_RXABSDELAY, > .max = MAX_RXABSDELAY } } > @@ -324,8 +321,7 @@ void e1000e_check_options(struct e1000_adapter > *adapter) > static const struct e1000_option opt = { > .type = range_option, > .name = "Interrupt Throttling Rate (ints/sec)", > - .err = "using default of " > - __MODULE_STRING(DEFAULT_ITR), > + .err = "using default of " > __stringify(DEFAULT_ITR), > .def = DEFAULT_ITR, > .arg = { .r = { .min = MIN_ITR, > .max = MAX_ITR } } > diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c > b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c > index 81fc5a6e3221..6a1a6678bd1a 100644 > --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c > +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c > @@ -7,7 +7,8 @@ > */ > > #include "pch_gbe.h" > -#include <linux/module.h> /* for __MODULE_STRING */ > +#include <linux/module.h> > +#include <linux/stringify.h> > > #define OPTION_UNSET -1 > #define OPTION_DISABLED 0 > @@ -440,7 +441,7 @@ void pch_gbe_check_options(struct pch_gbe_adapter > *adapter) > .type = range_option, > .name = "Transmit Descriptors", > .err = "using default of " > - __MODULE_STRING(PCH_GBE_DEFAULT_TXD), > + __stringify(PCH_GBE_DEFAULT_TXD), > .def = PCH_GBE_DEFAULT_TXD, > .arg = { .r = { .min = PCH_GBE_MIN_TXD, > .max = PCH_GBE_MAX_TXD } } > @@ -456,7 +457,7 @@ void pch_gbe_check_options(struct pch_gbe_adapter > *adapter) > .type = range_option, > .name = "Receive Descriptors", > .err = "using default of " > - __MODULE_STRING(PCH_GBE_DEFAULT_RXD), > + __stringify(PCH_GBE_DEFAULT_RXD), > .def = PCH_GBE_DEFAULT_RXD, > .arg = { .r = { .min = PCH_GBE_MIN_RXD, > .max = PCH_GBE_MAX_RXD } } > diff --git a/drivers/platform/cznic/turris-omnia-mcu-watchdog.c > b/drivers/platform/cznic/turris-omnia-mcu-watchdog.c > index 3ad146ec1d80..daabd88eb913 100644 > --- a/drivers/platform/cznic/turris-omnia-mcu-watchdog.c > +++ b/drivers/platform/cznic/turris-omnia-mcu-watchdog.c > @@ -9,6 +9,7 @@ > #include <linux/device.h> > #include <linux/i2c.h> > #include <linux/moduleparam.h> > +#include <linux/stringify.h> > #include <linux/types.h> > #include <linux/units.h> > #include <linux/watchdog.h> > @@ -25,7 +26,7 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in > seconds"); static bool nowayout = WATCHDOG_NOWAYOUT; > module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog > cannot be stopped once started (default=" > - __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); > + __stringify(WATCHDOG_NOWAYOUT) ")"); > > static int omnia_wdt_start(struct watchdog_device *wdt) { diff --git > a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c index > 8c247215d611..2ed6777e7035 100644 > --- a/drivers/rtc/rtc-ds1374.c > +++ b/drivers/rtc/rtc-ds1374.c > @@ -26,6 +26,7 @@ > #include <linux/workqueue.h> > #include <linux/slab.h> > #include <linux/pm.h> > +#include <linux/stringify.h> > #ifdef CONFIG_RTC_DRV_DS1374_WDT > #include <linux/fs.h> > #include <linux/ioctl.h> > @@ -381,7 +382,7 @@ MODULE_PARM_DESC(wdt_margin, "Watchdog timeout in > seconds (default 32s)"); static bool nowayout = WATCHDOG_NOWAYOUT; > module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog > cannot be stopped once started (default =" > - __MODULE_STRING(WATCHDOG_NOWAYOUT)")"); > + __stringify(WATCHDOG_NOWAYOUT)")"); > > static const struct watchdog_info ds1374_wdt_info = { > .identity = "DS1374 Watchdog", > diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c index > 4da608ccbccb..57c11ba13459 100644 > --- a/drivers/thunderbolt/tb.c > +++ b/drivers/thunderbolt/tb.c > @@ -10,6 +10,7 @@ > #include <linux/errno.h> > #include <linux/delay.h> > #include <linux/pm_runtime.h> > +#include <linux/stringify.h> > > #include "tb.h" > #include "tb_regs.h" > @@ -46,7 +47,7 @@ static unsigned int asym_threshold = > TB_ASYM_THRESHOLD; module_param_named(asym_threshold, asym_threshold, > uint, 0444); MODULE_PARM_DESC(asym_threshold, > "threshold (Mb/s) when to Gen 4 switch link symmetry. 0 > disables. (default: " > - __MODULE_STRING(TB_ASYM_THRESHOLD) ")"); > + __stringify(TB_ASYM_THRESHOLD) ")"); > > /** > * struct tb_cm - Simple Thunderbolt connection manager diff --git > a/drivers/thunderbolt/tunnel.c b/drivers/thunderbolt/tunnel.c index > ffd2d04b3bfa..2b911372001c 100644 > --- a/drivers/thunderbolt/tunnel.c > +++ b/drivers/thunderbolt/tunnel.c > @@ -11,6 +11,7 @@ > #include <linux/list.h> > #include <linux/ktime.h> > #include <linux/string_helpers.h> > +#include <linux/stringify.h> > > #include "tunnel.h" > #include "tb.h" > @@ -89,12 +90,12 @@ static int dprx_timeout = TB_DPRX_TIMEOUT; > module_param(dprx_timeout, int, 0444); MODULE_PARM_DESC(dprx_timeout, > "DPRX capability read timeout in ms, -1 waits forever > (default: " > - __MODULE_STRING(TB_DPRX_TIMEOUT) ")"); > + __stringify(TB_DPRX_TIMEOUT) ")"); > > static unsigned int dma_credits = TB_DMA_CREDITS; > module_param(dma_credits, uint, 0444); MODULE_PARM_DESC(dma_credits, > "specify custom credits for DMA tunnels (default: " > - __MODULE_STRING(TB_DMA_CREDITS) ")"); > + __stringify(TB_DMA_CREDITS) ")"); > > static bool bw_alloc_mode = true; > module_param(bw_alloc_mode, bool, 0444); diff --git > a/drivers/tty/serial/8250/8250_platform.c > b/drivers/tty/serial/8250/8250_platform.c > index 0570366a71d0..972e474654ac 100644 > --- a/drivers/tty/serial/8250/8250_platform.c > +++ b/drivers/tty/serial/8250/8250_platform.c > @@ -16,6 +16,7 @@ > #include <linux/moduleparam.h> > #include <linux/once.h> > #include <linux/platform_device.h> > +#include <linux/stringify.h> > > #include <linux/serial_8250.h> > > @@ -389,6 +390,6 @@ module_param_hw(share_irqs, bool, other, 0644); > MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 > devices (unsafe)"); > > module_param(nr_uarts, uint, 0644); > -MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" > __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")"); > +MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" > +__stringify(CONFIG_SERIAL_8250_NR_UARTS) ")"); > > MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR); > diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c > index 000f8eb24ead..b834eba09656 100644 > --- a/drivers/usb/atm/speedtch.c > +++ b/drivers/usb/atm/speedtch.c > @@ -19,6 +19,7 @@ > #include <linux/moduleparam.h> > #include <linux/slab.h> > #include <linux/stat.h> > +#include <linux/stringify.h> > #include <linux/timer.h> > #include <linux/types.h> > #include <linux/usb/ch9.h> > @@ -77,31 +78,31 @@ static unsigned int num_ModemOption; > module_param(altsetting, uint, S_IRUGO | S_IWUSR); > MODULE_PARM_DESC(altsetting, > "Alternative setting for data interface (bulk_default: " > - __MODULE_STRING(DEFAULT_BULK_ALTSETTING) "; > isoc_default: " > - __MODULE_STRING(DEFAULT_ISOC_ALTSETTING) ")"); > + __stringify(DEFAULT_BULK_ALTSETTING) "; isoc_default: " > + __stringify(DEFAULT_ISOC_ALTSETTING) ")"); > > module_param(dl_512_first, bool, S_IRUGO | S_IWUSR); > MODULE_PARM_DESC(dl_512_first, > "Read 512 bytes before sending firmware (default: " > - __MODULE_STRING(DEFAULT_DL_512_FIRST) ")"); > + __stringify(DEFAULT_DL_512_FIRST) ")"); > > module_param(enable_isoc, bool, S_IRUGO | S_IWUSR); > MODULE_PARM_DESC(enable_isoc, > "Use isochronous transfers if available (default: " > - __MODULE_STRING(DEFAULT_ENABLE_ISOC) ")"); > + __stringify(DEFAULT_ENABLE_ISOC) ")"); > > module_param(sw_buffering, bool, S_IRUGO | S_IWUSR); > MODULE_PARM_DESC(sw_buffering, > "Enable software buffering (default: " > - __MODULE_STRING(DEFAULT_SW_BUFFERING) ")"); > + __stringify(DEFAULT_SW_BUFFERING) ")"); > > module_param(BMaxDSL, uint, S_IRUGO | S_IWUSR); > MODULE_PARM_DESC(BMaxDSL, > - "default: " __MODULE_STRING(DEFAULT_B_MAX_DSL)); > + "default: " __stringify(DEFAULT_B_MAX_DSL)); > > module_param(ModemMode, byte, S_IRUGO | S_IWUSR); > MODULE_PARM_DESC(ModemMode, > - "default: " __MODULE_STRING(DEFAULT_MODEM_MODE)); > + "default: " __stringify(DEFAULT_MODEM_MODE)); > > module_param_array(ModemOption, byte, &num_ModemOption, S_IRUGO); > MODULE_PARM_DESC(ModemOption, "default: 0x10,0x00,0x00,0x00,0x20"); > diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c index > 7b0c791399ea..d4052d206e00 100644 > --- a/drivers/usb/atm/usbatm.c > +++ b/drivers/usb/atm/usbatm.c > @@ -64,6 +64,7 @@ > #include <linux/signal.h> > #include <linux/slab.h> > #include <linux/stat.h> > +#include <linux/stringify.h> > #include <linux/timer.h> > #include <linux/wait.h> > #include <linux/kthread.h> > @@ -103,26 +104,26 @@ static unsigned int snd_buf_bytes = > UDSL_DEFAULT_SND_BUF_SIZE; module_param(num_rcv_urbs, uint, S_IRUGO); > MODULE_PARM_DESC(num_rcv_urbs, > "Number of urbs used for reception (range: 0-" > - __MODULE_STRING(UDSL_MAX_RCV_URBS) ", default: " > - __MODULE_STRING(UDSL_DEFAULT_RCV_URBS) ")"); > + __stringify(UDSL_MAX_RCV_URBS) ", default: " > + __stringify(UDSL_DEFAULT_RCV_URBS) ")"); > > module_param(num_snd_urbs, uint, S_IRUGO); > MODULE_PARM_DESC(num_snd_urbs, > "Number of urbs used for transmission (range: 0-" > - __MODULE_STRING(UDSL_MAX_SND_URBS) ", default: " > - __MODULE_STRING(UDSL_DEFAULT_SND_URBS) ")"); > + __stringify(UDSL_MAX_SND_URBS) ", default: " > + __stringify(UDSL_DEFAULT_SND_URBS) ")"); > > module_param(rcv_buf_bytes, uint, S_IRUGO); > MODULE_PARM_DESC(rcv_buf_bytes, > "Size of the buffers used for reception, in bytes > (range: 1-" > - __MODULE_STRING(UDSL_MAX_BUF_SIZE) ", default: " > - __MODULE_STRING(UDSL_DEFAULT_RCV_BUF_SIZE) ")"); > + __stringify(UDSL_MAX_BUF_SIZE) ", default: " > + __stringify(UDSL_DEFAULT_RCV_BUF_SIZE) ")"); > > module_param(snd_buf_bytes, uint, S_IRUGO); > MODULE_PARM_DESC(snd_buf_bytes, > "Size of the buffers used for transmission, in bytes > (range: 1-" > - __MODULE_STRING(UDSL_MAX_BUF_SIZE) ", default: " > - __MODULE_STRING(UDSL_DEFAULT_SND_BUF_SIZE) ")"); > + __stringify(UDSL_MAX_BUF_SIZE) ", default: " > + __stringify(UDSL_DEFAULT_SND_BUF_SIZE) ")"); > > > /* receive */ > > -- > 2.55.0
Reviewed-by: Aleksandr Loktionov <[email protected]>
