Hello Sreeji,
Stas Sergeev did send me a patch that solve the problem.
What is not solve is the problem that my clipper application uses 99% of cpu
time.
Bye and thank you very much
Andreas
Zitiere Sreeji K Das <[EMAIL PROTECTED]>:
> Hi Andreas,
>
> Are you loading any drivers in your config.sys ? Can you try running
> dosemu without parsing config.sys & autoexec.bat ? The error that you
> reported comes from dpmi.c, while processing int 31 (Call real mode
> procedure). I do not know the inside gory details (!), but I don't
> think
> this is supposed to happen in the normal course.
>
> Launch dos and then type F5 (if that doesn't work for u, try Ctrl ^ 5),
> so
> that config.sys & autoexec.bat is bypassed. I'm sure dosemu would work
> properly. Is this problem happening when u run some particular program
> from dosemu ? There are few programs that cannot be (yet) run from
> within
> dosemu.
>
> Sreeji
> On Wed, 22 Aug 2001, Andreas Moroder wrote:
>
> > Hello Sreeji,
> >
> > i started the debugger and got the following output on the debugger
> screen
> >
> > unable to open map file /usr/src/dosemu/bin/dosemu.map
> > system state: stopped
> > AX=0005 BX=0000 CX=0000 DX=0000 SI=0000 DI=0000 SP=00fc
> BP=0000
> > DS=0040 ES=0000 FS=0000 GS=0000 FL=0202
> > CS:IP=f800:2004 SS:SP=0030:00fc
> >
> > f800:2004 B280 mov dl,80
> > log +a
> > g
> >
> > ****
> > leavedos(99) called, at termination point of DOSEMU
> > ****
> >
> > system state: stopped in DPMI-16bit
> >
> > EAX: 00000301 EBX: 0000000a ECX: 00000000 EDX: 000043ff eflags:
> 00010246
> > ESI: 0000ad7e EDI: 0000ad0a EBP: 0000ad46 DS: 01f7 ES: 01f7 FS: 0000
> GS: 0000
> > CS:EIP= 01d7:00001710 SS:ESP= 01f7:c344ad08
> >
> > #01d7:1710 8B66F6 mov sp,[bp-0A]
> > quit
> >
> > the last lines in the debug output file are
> >
> > DPMI: calling interrupthandler 0x31 at 0x00a7:0x00003244
> > DPMI: default protected mode interrupthandler 0x31 called
> > DPMI: int31, ax=0301 ,ebx=000000e0 ,ecx=00000000 ,edx=000001f7
> > edi=0000aee0 ,esi=0000af50
> > DPMI: Interrupt vector overwritten!leavedos(99) called - shutting
> down
> >
> 187678,1
> >
> > If necessary I can also send the full logfile.
> >
> > Can you tell me what is going wrong ?
> > Thank you very much.
> >
> > Andreas Moroder
> > Sant�tsbetrieb Brixen - Azienda Sanitaria di Bressanone
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-msdos"
> in
> > the body of a message to [EMAIL PROTECTED]
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
>
>
>
Dr. Andreas Moroder
Sanit�tsbetrieb Brixen - Azienda Sanitaria di Bressanone
-
To unsubscribe from this list: send the line "unsubscribe linux-msdos" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
