Well, I already solved the problem dosemu.users was the key configfile :) added: <myusername> c_all
but anyway, I have another problem. I tryed to make compaq softpaq [?] floppies with dosemu. IT failed, and the softpaq program printed an error :ERROR 07: Device Parameter (disk drive) Failure 11. Well.. This is not a dosemu error, but maybe it is possible to overcome the problem? who's interested, pisitek.com/sp6144.exe is the softpaq in question. Regards, pisi On Sun, 7 Oct 2001 [EMAIL PROTECTED] wrote: > > On Sat, 6 Oct 2001 00:16, Martin 'pisi' Paljak wrote: > > Hello! > > Well.. I'm having the same problem. And trust me, it's not because of not > > having access to the real device. And also doesn't hel editing the config > > file and adding /dev/fd0 to $_floppy_a like the manual suggests.. it just > > doesnt see floppy A! > > > > 1. Did you unmount the floppy in Linux first (good luck if you have > "supermount" :))? > 2. Do you really have a floppy drive (/dev/fd0) because if you have a > Superdisk or LS-120 drive, you don't really have a floppy drive -- you have > an ATAPI IDE drive like me (and you would have to have $_floppy_a="atapi" > instead)? > 3. Is your floppy a DOS or vfat floppy? > > Other than that, I'm out of ideas. What error message does DOS give when > you > try to access it? > Anything in boot.log? > > pesarif > > > - > To unsubscribe from this list: send the line "unsubscribe linux-msdos" in > the body of a message to [EMAIL PROTECTED] > More majordomo info at http://vger.kernel.org/majordomo-info.html > - To unsubscribe from this list: send the line "unsubscribe linux-msdos" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
