I have tested this:
stty -F /dev/ttyS0 crtscts
setserial /dev/ttyS0 uart 16450
And in ms-dos: mode com1:96,n,8,1,p
But i have the same problem yet, all works fine if the report it�s short
but when it has more lines (>25) it stops the printing, i have tested
from the linux directly with cat /etc/hosts > /dev/ttyS0 in a large
hosts file but it works good, anyone can help me please?
-----Mensaje original-----
De: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] En nombre de Miguel A. Rasero
Enviado el: domingo, 13 de julio de 2003 3:14
Para: [EMAIL PROTECTED]
Asunto: Serial printer problem
Hi, i have installed dosemu dosemu-1.0.2.1 and
configure dosemu.conf to get direct access to
/dev/ttyS0, then i configure in dosemu the com1 port
with the "mode com1:9600,n,8,1,p" when i print it
works fine but when i print anything large, i am using
a pos printer, when i print a simple ticket works fine
and cut the paper too, but when i print the whole day
sales resume, the printer begins to print the lines
upon others and doesn�t cut the paper, do you know what
can be the problem? the printer and the program that i
am using for pos has been tested in a normal ms-dos
Computer.
I have other problem, i can�t use the (Ntilde) (�) from
dosemu, do you know any way to do this?
Thanks by the help and sorry for my poor english
-
To unsubscribe from this list: send the line "unsubscribe linux-msdos"
in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
-
To unsubscribe from this list: send the line "unsubscribe linux-msdos" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
