Hi Miguel, On Sun, Jul 13, 2003 at 10:13:29PM +0200, Miguel A. Rasero wrote: > I have tested this: > > stty -F /dev/ttyS0 crtscts > > setserial /dev/ttyS0 uart 16450 > > And in ms-dos: mode com1:96,n,8,1,p > > But i have the same problem yet, all works fine if the report it?s short > but when it has more lines (>25) it stops the printing, i have tested > from the linux directly with cat /etc/hosts > /dev/ttyS0 in a large > hosts file but it works good, anyone can help me please? > *snip* > > Hi, i have installed dosemu dosemu-1.0.2.1 and > configure dosemu.conf to get direct access to > /dev/ttyS0, then i configure in dosemu the com1 port > with the "mode com1:9600,n,8,1,p" when i print it > works fine but when i print anything large, i am using > a pos printer, when i print a simple ticket works fine > and cut the paper too, but when i print the whole day > sales resume, the printer begins to print the lines > upon others and doesn?t cut the paper, do you know what > can be the problem? the printer and the program that i > am using for pos has been tested in a normal ms-dos > Computer.
When you say the printer "stops printer" do you mean it stops printing altogether, or that it stops feeding the paper and keeps printing over and over the same line? > I have other problem, i can?t use the (Ntilde) (Ñ) from > dosemu, do you know any way to do this? Perhaps you need to change the character set options in dosemu.conf? There are term_char_set for 1.0.2, and for the development versions internal_char_set and external_char_set. -- Ryan Underwood, <nemesis at icequake.net>, icq=10317253 - To unsubscribe from this list: send the line "unsubscribe linux-msdos" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
