Stas Sergeev wrote: > Hello. > > Ralph Alvy wrote: >> I get now, when attempting to load the app in question, is this: > Please attach your boot.log.
Here's more detail I have extracted from this. With 1.3.1, I can't print with hogthreshold at either 1 or 2. With 1.2.2, I can print with hog at 1 only if I switch back to the shell application that calls the app, and I can print with hog at 2 without having to switch back to the shell application at all. With 1.3.1, if I attempt to kick off the printing by switching back to the shell application, I get this: [EMAIL PROTECTED]:~/dosemu-1.3.1/bin$ ./xdosemu ERROR: cpu exception in dosemu code outside of VM86()! trapno: 0x0e errorcode: 0x00000006 cr2: 0x053f3805 eip: 0x40165512 esp: 0xbffff79c eflags: 0x00210207 cs: 0x0023 ds: 0x002b es: 0x002b ss: 0x002b Page fault: write instruction to linear address: 0x053f3805 CPU was in user mode Exception was caused by non-available page Attached is my boot.log.
CONF: config variable parser_version_3 set CONF: config variable c_system set CONF: Parsing built-in dosemu.conf file. CONF: config variable version_3_style_used set CONF: Parsing built-in global.conf file. CONF: config variable version_3_style_used unset CONF: config variable version_3_style_used set CONF: opened include file /etc/dosemu/dosemu.conf CONF: closed include file /etc/dosemu/dosemu.conf CONF: opened include file /home/ralvy/.dosemurc CONF: closed include file /home/ralvy/.dosemurc CONF: config variable skip_dosrc set CONF: mapping driver = 'auto' debug flags: -a+cw CONF: Disabling use of pentium timer CONF: dosbanner on CONF: timer freq=18, update=54925 CONF: CPU set to 386 CONF: 8192k bytes XMS memory CONF: 2048k bytes EMS memory CONF: EMS-frame = 0xe000 CONF: DPMI-Server on CONF: PM DOS API Translator on CONF: dosemu running on CONF: x keycode keycode 2 aspect_43 mode13fact 2 gamma 100 font 'vga' mgrab_key "Home" SER: directory /var/lock namestub LCK.. binary No MOUSE: no device specified, type 7 using internaldriver: yes, emulate3buttons: no baudrate: 0 CONF: Keyboard-layout keyb-user CONF: Keyboard-layout us device: /dev/fd0 type 2 h: 0 s: 0 t: 0 floppy A: CONF: fastfloppy = 1 CONF: IPX support off CONF(LPT0) f: (null) c: lpr o: -PLexMark t: 10 port: 0 CONF: not allowing speaker port access CONF: Packet Driver disabled. device: /home/ralvy/.dosemu/drives/c type 4 h: -1 s: -1 t: -1 drive C: CONF: config variable c_system unset CONF: mostly running as USER: uid=1000 (cached 1000) gid=1000 (cached 1000) DBG_FD already set DOSEMU-1.3.1.0 is coming up on Linux version 2.4.26-1-686 CONF: reserving 640Kb at 0x00000 for 'd' (Base DOS memory (first 640K)) CONF: reserving 64Kb at 0xF0000 for 'r' (Dosemu reserved area) CPU: Stack bottom 0xbfffe000, top 0xc0000000, esp=0xbffff820 major = 136 minor = 0 CONF: reserving 128Kb at 0xA0000 for 'v' (Video memory) SERIAL $Header: /cvsroot/dosemu/dosemu/src/base/serial/ser_init.c,v 1.9 2004/05/07 13:49:45 stsp Exp $ CONF: reserving 64Kb at 0xE0000 for 'E' (EMS page frame) TIME: using 9154 usec for updating ALRM timer leavedos(0|0x0) called - shutting down
