General Posting for help.............................
I am using caldera 1.2 & 1.3 which installs
with Caldera Dos v7.02 using DOSEMU v 0.66.7..
I have one requirement of Dos under Linux,
That is to run a Dos 5250 emulator program.
The program runs operates is own ISA
emulator card at port 0x368 at mem D000 ..
The program runs flawlessly and connects to
the AS/400 under MSDOS..DOS in WIN 3.1..
DOS in OS/2 or even DOS in WIN-OS/2..
All on the same machine..
However in Dos under LINUX I get the error
message ..UNABLE TO FIND 5250 CARD..
In my dosemu.conf I used ports { 0x300 0x3ff }
& D000 mem seems clear..
My Adaptec SCSI card is 0x340-0x35F
SB16 card is DMA 3 at 0x330-0x331
Parallel port lpt1 0x378-0x37f
** All else is above or below & is FREE **
The program requires no config settings or
drivers,, the program takes care of all.
The card is from MicroIntegration
http://www.miworld.com
They support WinDoze primarily and DOS
only under the usual DOS enviorment.
LINUX is not in their vocabulary.
Any ideas
Bob T
