dosemu 0.99.13
All I want to do is allow my msdos-based program to control my modem on
com2. Setting $_com2="/dev/ttyS2" in /etc/dosemu.conf only appears to
do the job. The dos program reports "No IRQ found". So I tried using
the $_irqpassing="3". The modem doesn't respond at all. Also tried
$_irqpassing=" 3", due to some note about spaces in the Tech Readme.
Also tried $_ports="0x2f8", then $_ports="range 0x2f8 0x2ff". Several
other varieties of these settings were attempted, all with the same
results. Either the modem does not respond at all or the program
reports no IRQ. The modem is jumpered for com2, irq 3 and is *not* a
winmodem.
Please help. Thanks!
