On Wed, 2 Feb 2000, edge wrote:
> dosemu 0.99.13
>
> All I want to do is allow my msdos-based program to control my modem on
> com2. Setting $_com2="/dev/ttyS2" in /etc/dosemu.conf only appears to
> do the job. The dos program reports "No IRQ found". So I tried using
> the $_irqpassing="3". The modem doesn't respond at all. Also tried
> $_irqpassing=" 3", due to some note about spaces in the Tech Readme.
> Also tried $_ports="0x2f8", then $_ports="range 0x2f8 0x2ff". Several
> other varieties of these settings were attempted, all with the same
> results. Either the modem does not respond at all or the program
> reports no IRQ. The modem is jumpered for com2, irq 3 and is *not* a
> winmodem.
On my system:
COM1=/dev/ttyS0
COM2=/dev/ttyS1
...
Hugh Lawson
Greensboro, North Carolina
[EMAIL PROTECTED]
