Hai everyone...
I'm using D-Link ISA PnP DE220PT ethercard at io=0x240 and IRQ=15. The
ne.o module hasn't been able to detect the card at the above
address because of a couple of reasons.Maybe because the card is Plug
& Play one. However, the card can be detected if we use isapnptools.
By issuing this commands, I hope anybody who are using this card can
make it work under Linux.
root#pnpdump >& /etc/isapnp.conf
root#isapnp /etc/isapnp.conf
If you got an error, probably you can sole this by typing
(VERIFYLD N)
at the top of isapnp.conf file.
If everything's OK, load the ne module by typing
root#modprobe ne io=0x240
Then the interface is built.You have to up your interface first before
browsing.
Thanx for Donald at CESDIS for the driver. However the ISAPNPTOOLS is
also a great product. Thanx for the persons who create it.
[EMAIL PROTECTED]
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
