Hi,
I know the tc is not documented that well. ANK,the author has his hands
full doing bigger and better things..
Look at this site to get an idea of how tc can be used..
http://www.ittc.ukans.edu/~rsarav/howto/index.html
hth,
Arni
Christoph Haberberger wrote:
>
> Hi!
>
> Is there no useful (and more or less complete) documentation for the
> IPROUTE2 package?
> The 'ip'-utility is usable after some searching in different mailing lists.
> But the 'tc'-utility is really hard to understand, even after reading the
> CBQ paper from Sally Floyd and Van Jacobson.
>
> All I want is to do resource sharing on an Internet link for 4 subnetworks,
> which are connected through a 768kbit HDSL Bridge.
> Another question is how to handle devices with different bandwith depending
> on incoming/outgoing traffic?
> And is it possible to shape the bandwidth when I use a proxy?
> e.g. this should symbolize an internet router with proxy:
>
> internet
> |
> eth0
> / | \
> eth1 eth2 eth3
>
> 3 different subnets communicate internally and access the internet via this
> router.
> I want to shape the bandwidth for eth1 eth2 eth3, if the traffic is going
> through eth0 and through the proxy, but not if the traffic internally
> (between subnets).
> Is that possible?
>
> THANKS A LOT FOR EVERY USEFUL ANSWER!
>
> Christoph.
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-net" in
> the body of a message to [EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
