Hi everybody,
I have a DFE-500TX ether card DEC tulip module (eth0) and a
DFE-530TX ether card via-rhine module (eth1).
With eth0 all is ok, but when I initialise eth1 (via-rhine) (with
ifconfig and insmod via-rhine) it cause a sound failure (sound card
Yamaha OPL-3sax).
I have disable eth1 and sound work correctly, If i initialise eth1 and
after, put it down (ifconfig eth1 down ;rmmod via-rhine) i have to
reboot to have sound ....
# /usr/sbin/pnpprobe
Found PnP Card ->YMH0030<- ->OPL3-SA3 Snd System<-
#/sbin/lspci
00:00.0 Host bridge: Intel Corporation 440LX - 82443LX Host bridge (rev
03)
00:01.0 PCI bridge: Intel Corporation 440LX - 82443LX AGP bridge (rev
03)
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 01)
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 01)
00:0d.0 Ethernet controller: Digital Equipment Corporation DECchip 21140
[FasterNet] (rev 22)
00:0f.0 Ethernet controller: VIA Technologies, Inc.: Unknown device 3043
(rev 06)
01:00.0 VGA compatible controller: ATI Technologies Inc 215GB [Mach64
GB] (rev 5c)
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel 440LX - 82443LX PAC Host (rev 3).
Medium devsel. Fast back-to-back capable. Master Capable.
Latency=32.
Prefetchable 32 bit memory at 0xf8000000 [0xf8000008].
Bus 0, device 1, function 0:
PCI bridge: Intel 440LX - 82443LX PAC AGP (rev 3).
Medium devsel. Fast back-to-back capable. Master Capable.
Latency=96. Min Gnt=12.
Bus 0, device 7, function 0:
ISA bridge: Intel 82371AB PIIX4 ISA (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable. No
bursts.
Bus 0, device 7, function 1:
IDE interface: Intel 82371AB PIIX4 IDE (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable.
Latency=64.
I/O at 0xfcd0 [0xfcd1].
Bus 0, device 7, function 2:
USB Controller: Intel 82371AB PIIX4 USB (rev 1).
Medium devsel. Fast back-to-back capable. IRQ 11. Master
Capable. Latency=64.
I/O at 0xfce0 [0xfce1].
Bus 0, device 7, function 3:
Bridge: Intel 82371AB PIIX4 ACPI (rev 1).
Medium devsel. Fast back-to-back capable.
Bus 0, device 13, function 0:
Ethernet controller: DEC DC21140 (rev 34).
Medium devsel. Fast back-to-back capable. IRQ 10. Master
Capable. Latency=165. Min Gnt=20.Max Lat=40.
I/O at 0xfc00 [0xfc01].
Non-prefetchable 32 bit memory at 0xfedffc00 [0xfedffc00].
Bus 0, device 15, function 0:
Ethernet controller: VIA Technologies Unknown device (rev 6).
Vendor id=1106. Device id=3043.
Medium devsel. IRQ 9. Master Capable. Latency=200. Min
Gnt=118.Max Lat=152.
I/O at 0xf880 [0xf881].
Non-prefetchable 32 bit memory at 0xfedff800 [0xfedff800].
Bus 1, device 0, function 0:
VGA compatible controller: ATI Mach64 GB (rev 92).
Medium devsel. Fast back-to-back capable. IRQ 9. Master
Capable. Latency=66. Min Gnt=8.
Prefetchable 32 bit memory at 0xf6000000 [0xf6000008].
I/O at 0xe800 [0xe801].
Non-prefetchable 32 bit memory at 0xfecfe000 [0xfecfe000].
Does anyone have an idea? what is the problem ????
I have switched the card (eth1) to another PCI slot, and nothing , I
have change the irq and I/O of my sound card ...
I have change BIOS config many time ....
Thank,
Nick
[EMAIL PROTECTED]
[EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
