At 04:47 PM 9/7/99 -0400, Jeff Mcadams wrote:
>Thus spake Dennis
>>At 11:10 AM 9/7/99 +0000, you wrote:
>>>I know bonding dial out asynch PPP is possible but can bonded DSL be
>>>done ? (Not all DSL is close enough to a CO for high speeds, ergo 2
>>>bonded low speed is desirable.)
>
>>thats pretty funny. you are overselling your bandwidth by 20 times on
>>DSL and then you want to bond channels to get 20% (instead of 10%) of
>>the line speed!
>
>Uhm...he was referencing distance from the CO for the speed limitations,
>not oversell of bandwidth. Careful about jumping to conclusions.
My point was is that he is not going to get anywhere near the line speed
(regardless of what it is), so adding another load to the already
overloaded wire will just worsen the load.
DB
Emerging Technologies, Inc.
http://www.etinc.com
ISA and PCI T1/T3/V35/HSSI Cards for FreeBSD and LINUX
Multiport T1 and HSSI/T3 UNIX-based Routers
Bandwidth Management Standalone Systems
Bandwidth Management software for LINUX and FreeBSD
DSL Frame Relay Bridging over T1 and T3
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
