Hi Tuan
>or 10Base2 (coax)? If you're connecting 10BaseT directly you'll need to
It's 10base2, connected with the T piece direct into the card, and a terminator
on each end. The hardware seems ok, as if I use the msdos based diagnostics,
on the disc withthe card, it sets up a host one end and a slave the other, and
fires packets both ways, this asses without dropping any packets either way,
suggesting a software problem.
>Also you should delete that gateway from your eth0 config because
>it is invalid as far as your network config currently is setup.
Ok, I'll do that just now.
>Hope this helps. Another thing to try is to disable PnP in the BIOS of
>your Linux machine.
I've already done that, it made no difference :(
--
Cheers
/\
/--\NDY
http://www.hailesmail.net
The home of `Echoes of Insanity'
& `Begin Linux' Mailing Lists
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
