On Wed, 08 Mar 2000, Michael Renzmann wrote:
> Hi Christian.
>
> > |-------| eth0 |-----|
> > | S |---------| | C |
> > | e | | eth0| l |
> > | r | |-----------------| i |
> > | v | eth1 | | e |
> > | e |---------| | n |
> > | r | | t |
> > |-------| |-----|
> >
>
> I have a similar problem. In my case I have more than one NIC on _both_
> sides that I want to be used. The traffic itself should later be
> compressed and encrypted, so I will need a virtual NIC that any network
> program could use so that encryption and compression will be handled
> transparently. I found that tinc maybe would be the right choice.
>
> But setting up more than one NIC connection between two those two hosts
> does not work up to now. Is there some documentation on this? What
> about QOS-features in Kernel 2.2.x (I�m using 2.2.14 right now), is
> there any documentation available? And how about those "multipath
> routes" seen in the kernel configuration?
URLs worthy of mention are:
http://qos.ittc.ukans.edu
http://www.ittc.ukans.edu/~rsarav/howto/
http://snafu.freedom.org/linux2.2/
for equal cost multipath, there are a couple of good discussions on deja.com.
That's where i got my information.
HTH
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
