Linux-Networking Digest #368, Volume #11 Tue, 1 Jun 99 20:13:38 EDT
Contents:
Redhat 6.0, kernel 2.2.5, IBM token ring == no system ("Amelia A. Lewis")
FA310TX rev D-2: What driver ? (The Unstoppable Drew)
kppp - pppd: failed to reopen /dev/modem: Permission denied (Marc Debacker)
Mount CD-ROM over network and report as CD-ROM (Onno Ebbinge)
Re: IPFWADM + dynamic PPP (bgeer)
Re: sendmail (Benjamin John)
Re: Need help with IP Masquerading and UDP packets ("Cliff")
Help Me Identify an Ethernet Card ("Hoyt")
Help! is pci nic compatible with 486 board? (Rey Kanzaki)
Re: Linux: ICMP Redirect, IP Source Routing unterdruecken (Helge Oldach)
Re: Telnet using "root" (Stuart R. Fuller)
Re: Dec VT220 Terminal Configuration (Stuart R. Fuller)
Re: Hot Horny Young Teen ("Hugh Saunders")
Re: Can't see server until server sees me (Scottaii)
Re: DNS setup ("Cliff")
Re: DNS server problems ("CF")
Re: Warning against Announce Communications web hosting (Kevin)
Re: Linux: ICMP Redirect, IP Source Routing unterdruecken (Detlef Bosau)
PPP to ISP fails ("Andy Greenshaw")
Re: Telnet again ([EMAIL PROTECTED])
fetchmail and ftp+IP-Masquerade problems (Meling Mudin)
Re: IP Masq and Port Forwarding ("TURBO1010")
----------------------------------------------------------------------------
From: "Amelia A. Lewis" <[EMAIL PROTECTED]>
Subject: Redhat 6.0, kernel 2.2.5, IBM token ring == no system
Date: Tue, 01 Jun 1999 15:53:39 -0400
Reply-To: [EMAIL PROTECTED]
Anybody know what I can do to get a working RedHat 6.0 system on a
token ring network?
Using two different target machines:
PPro 150/64 Mb, IBM Auto 16/4 ISA TR adapter,
(same machine), IBM Turbo 16/4 ISA TR adapter,
PII 300/128 Mb, IBM PCI 16/4 TR adapter,
installation fails on specification of networking.
In the first case, the installation detects the adapter, causes a kernel
panic, and proceeds to fill the screen with bad_slab_magic. In the
other two cases, installation reports "I can't find the device anywhere
on your system!" All machines are perfectly happy to network using toy
operating systems.
What's wrong with the 2.2.5 TR module? I haven't been able to find
anyone else reporting this level of difficulty, but I can't get a
machine to actually be usable. Why can't a PCI card be found? Why does
the auto ISA card cause a kernel panic? Why can't the turbo ISA card be
found?
Anyone have any ideas? Apart, of course, from "use ethernet," much as
I'd *like* to .... One of these machines was running RedHat 5.2 with no
problems ... I'm presuming that the problems are somehow in the token
ring code, correct? The module somehow getting *very* confused?
TIA,
Amy!
------------------------------
From: The Unstoppable Drew <[EMAIL PROTECTED]>
Subject: FA310TX rev D-2: What driver ?
Date: 01 Jun 1999 12:08:24 -0400
I've got some brand new Netgear FA310TX rev D2 that don't want to work
with my 2.2.5 linux system. The major chip is a Netgear-branded
LC82C169C instead of the DEC 21140. I compiled using the tulip driver
(before I noticed the chip difference) and the card isn't recognized.
Anyone gotten one of these new cards to work under Linux ?
Thanks,
Drew
--
Drew Marold - [EMAIL PROTECTED]
Resident Mad Scientist - RAS Modem Group
Analog Devices Inc.
The possibility of powerful compassionate leadership,
greatness, and romantic adventure.
------------------------------
From: Marc Debacker <[EMAIL PROTECTED]>
Subject: kppp - pppd: failed to reopen /dev/modem: Permission denied
Date: Tue, 01 Jun 1999 23:01:53 +0000
Hello out there,
I recently upgraded my PC to a Slackware 4.0 pre-release, and KDE 1.1,
installing everything from scratch.
Now it appears that kppp doesn't do it's job anymore when i try to run
it as an ordinary user. In my /var/log/syslog file i now get messages
as
pppd: failed to reopen /dev/ttyS2: Permission denied
I thought this was because the permission bits on the device /dev/ttyS2
were bad, and i made this device readable, writeble and executable as
root.
But after this, i stil get the same error!
I checked every nifty little thing in the online kppp documentation, but
i can't find a clue in here.
What am i doing wrong?
Any useful help is appreciated!
TIA
--
[EMAIL PROTECTED]
[EMAIL PROTECTED]
No gates, not windows, it's open!
------------------------------
From: Onno Ebbinge <[EMAIL PROTECTED]>
Crossposted-To:
linux.redhat.misc,comp.os.linux.help,comp.os.linux.misc,comp.os.linux.questions,comp.os.linux.setup
Subject: Mount CD-ROM over network and report as CD-ROM
Date: Tue, 01 Jun 1999 23:00:07 +0200
I want to mount a CD-ROM (or ISO file, or directory) that
resides on my RH Linux 6.0 server over my network and my
WIN NT 4 machine must report it as a CD-ROM.
I've posted this question on some NT newsgroups but there
were mostly brain dead people...
I think I need a NT 4 device driver who can pull this off
but I can't find one. If it's really necessary I can write
the driver (I have the NT 4 DDK stuff) but I prefer a download...
Onno.
------------------------------
From: [EMAIL PROTECTED] (bgeer)
Subject: Re: IPFWADM + dynamic PPP
Date: 1 Jun 1999 15:10:18 -0600
[EMAIL PROTECTED] (Brent Willcox) writes:
>Essentially, how do I get the IP from pppd into the firewall startup
>script so that it knows what IP address I have been dynamically assigned.
I posted a script file on my Web site for setting ip masq rules after
dialup. It sets the rules recommended in the IPMasq MINI-HOWTO.
Included is a function which waits for the net device (default: ppp0)
to come up, then parses out the dynamic ip address. It has worked
reliably for me.
A note about unreliability: occassionally the "ifconfig" program on my
system seg faults whenever "ifconfig <net device>" is invoked, tho it
works correctly if "ifconfig" is invoked. In the former case, my
script fails.
My web site is: www.xmission.com/~bgeer/bgeer.html
I am in the process of creating a "getip" C program which will
identify such things as ip address, net mask, broadcast mask, etc. for
any given net device. This will more reliably provide the info to my
ipmasq script. I will post this solution on my Web site as soon as
I'm satisfied with it.
Cheers, Bob
--
<> Robert Geer & Donna Tomky | * <>
<> [EMAIL PROTECTED] | _o * o * o <>
<> [EMAIL PROTECTED] | -\<, * <\ </L <>
<> Salt Lake City, Utah USA | O/ O __ /__, /> <>
------------------------------
From: Benjamin John <[EMAIL PROTECTED]>
Subject: Re: sendmail
Date: 01 Jun 1999 15:01:45 PDT
Install the IMAP rpm found on your cd
Jeff wrote:
> This there any good documentation on setting up sendmail as a mail
> server(pop3)
> I have just installed RH6.0 and want to set it up as our web/mail server but
> cant find any good books or docs on setting it up.
>
> Thanks,
> Jeffrey Mack
------------------------------
From: "Cliff" <[EMAIL PROTECTED]>
Subject: Re: Need help with IP Masquerading and UDP packets
Date: Tue, 01 Jun 1999 22:24:46 GMT
It looks like net2phone makes a call to the distant end on the 10000 port
and after a brief handshake changes to a different (possibly random) port to
make the actual transmission. You will probably have to find out what the
range of the transmission port is and make allowances for it in your
firewall rules. You could verify this by opening the firewall up and seeing
if the connection works. Do it briefly, just to verify the problem. Then
tweak your rules to allow for the port handoff. The only other alternative
AFAIK is to use a proxy. Either way, you still need to know what other
ports net2phone uses.
--
-Cliff
Views expressed are my own and not necessarily those of my employer
Concordia Net, Inc. When replying via email please use; cwheat at concordia
dot net not
root@localhost
Luiz Otavio L. Zorzella wrote in message
<[EMAIL PROTECTED]>...
>
>Hi,
>
>I have a Win 95 inside a private LAN (ppp) that I set up with ip
>masquerading.
>
>To start, I had only one very simple rule:
>
>ipfwadm -F -a m -S 192.168.10.0/24 -D 0.0.0.0/0
>
>Everything works fine: www, ftp, etc. Then I installed net2phone
>(http://www.net2phone.com), and I'm trying to make it work.
>
>While seting up, net2phone makes a "Test for firewall", and fails in
>this test. I set up 2 specific rules for net2phone, then:
>
>ipfwadm -F -a m -b -P udp -S 192.168.10.51 10000 -D 0.0.0.0/0 10000
>ipfwadm -F -a m -b -P tcp -S 192.168.10.51 10000 -D 0.0.0.0/0 10000
>ipfwadm -F -a m -b -P icmp -S 192.168.10.51 10000
>
>and I configured net2phone to use the 10000 port number (it can be
>configured to anything you want, according to their website). The
>test still fails.
>
>I tcpdumped both by eth0 (private LAN) and ppp0 (internet) while
>doing the test, and I think the problem comes in this line from my
>ppp0, though I don't know exactly what to do:
>
>12:45:31.461066 169.132.184.211.46869 > w.x.y.z.6613: udp 55 (DF)
>12:45:31.461066 w.x.y.z > 169.132.184.211: icmp: w.x.y.z udp port 6613
unreachable [tos 0xc0]
>
>Any help is appreciated. Please note that I made a "global replace"
>of my firewall IP address by w.x.y.z in the dumps, and a replace of
>my internal machine by internal.mydomain.com. Forgive my paranoia...
>:^>
>
>Follows the traffic generated in the test, as seen by tcpdump in both
>interfaces:
>
[snip]
>--
>Luiz Otavio L. Zorzella Computer Engineer
>[EMAIL PROTECTED]
>
>
>
>
>
>
>
------------------------------
From: "Hoyt" <[EMAIL PROTECTED]>
Subject: Help Me Identify an Ethernet Card
Date: Tue, 1 Jun 1999 12:54:34 -0400
I am trying to identify several ISA ethernet cards marked "Gateway =
Communications, Inc.". I have done a web search and found nothing and =
tried to contact Gateway, but they require a customer number for =
technical assistance.
The ethernet cards have an rj45 and db 15 connector, but no bnc =
connector. Jumper jp10 allows irq selections of 2 thru 15. The base =
address is selected through SW1, a dip switch; 1-4 selects the i/o, 2-8 =
selects the rom address.=20
Below the dip switch is a barcode with the letters"AH03321". On the back =
of the board is: QEC-4V0 94V0 and 82200141-01, copyright 1992 and the =
numbers 9316. The two chips are marked MB86960A 9229 Q23 FUJITSU
I would like to know the table for the dip switch settings for the port =
address and the model number to select an appropriate Linux driver.
Thanks,
Hoyt
------------------------------
From: [EMAIL PROTECTED] (Rey Kanzaki)
Subject: Help! is pci nic compatible with 486 board?
Date: Tue, 1 Jun 1999 21:57:26 GMT
Hi,
Another newbie asking for help here. (hardware newbie to be exact).
I'm using an old 486 box as a gateway and occassionally, the box
hangs. The problem goes away after a reboot. I'm using the faster
100mb pci nic (from Realtek) after having replaced my reliable but
slower 10mb isa nic. I've never had problems with the old isa nic,
so I'm wondering if the problem is that 486 boards simply do not
support new pci hardware. I was told that the new pci specification
(2.1??) may not be compatible with old 486 boards.
So I ask, is this a common problem? If there is a faq or how-to
that can answer this question, please point me in that direction.
My 486's have been good to me, and I'll only replace them if left
with no other choice. Please save them... :) Thank you.
--
RK
------------------------------
Crossposted-To: de.comm.internet.routing
From: [EMAIL PROTECTED] (Helge Oldach)
Subject: Re: Linux: ICMP Redirect, IP Source Routing unterdruecken
Date: Tue, 1 Jun 1999 21:50:31 GMT
In <7iusdp$l53$[EMAIL PROTECTED]> Bernd Eckenfels <[EMAIL PROTECTED]> writes:
| Router haben in (nicht zwischen) den heutigen breitbandigen Netzen
| weitgehend ausgedient.
Wie bitte? Was ist "zwischen"? Was ist "in"?
------------------------------
From: [EMAIL PROTECTED] (Stuart R. Fuller)
Subject: Re: Telnet using "root"
Crossposted-To: comp.os.linux,comp.os.linux.setup,hk.comp.os.linux,tw.bbs.comp.linux
Reply-To: [EMAIL PROTECTED]
Date: Tue, 01 Jun 1999 22:00:04 GMT
Fong's ([EMAIL PROTECTED]) wrote:
: Can "root" to telnet and login?
: I fail to login by root, but other account is ok..
man securetty
Stu
------------------------------
From: [EMAIL PROTECTED] (Stuart R. Fuller)
Subject: Re: Dec VT220 Terminal Configuration
Reply-To: [EMAIL PROTECTED]
Date: Tue, 01 Jun 1999 22:00:04 GMT
Steve Davidson ([EMAIL PROTECTED]) wrote:
: I have an old Dec VT220 terminal that I would like to use for access to
: my RH box. Where can I find information regarding setting this up?
/usr/doc/HOWTO/unmaintained/Serial-HOWTO
You'll need a null modem cable (female connectors on both ends with at least
pins 2 and 3 reversed).
Stu
------------------------------
From: "Hugh Saunders" <[EMAIL PROTECTED]>
Crossposted-To:
comp.os.linux.development.system,comp.os.linux.hardware,comp.os.linux.m68k,comp.os.linux.misc,comp.os.linux.setup,comp.os.linux.x,comp.os.lynx,comp.os.mach,comp.os.magic-cap
Subject: Re: Hot Horny Young Teen
Date: Tue, 1 Jun 1999 05:21:15 +0100
Is this a request for a HOWTO?
[EMAIL PROTECTED] wrote in message
<[EMAIL PROTECTED]>...
------------------------------
From: [EMAIL PROTECTED] (Scottaii)
Subject: Re: Can't see server until server sees me
Date: 1 Jun 1999 04:22:40 GMT
Yep. Tried it different ways, with just the hostname, and with the
fully-qualified name, no difference. I have noticed that the other Linux client
machine doesn't need to be pinged first, though it does take longer than normal
before it will find the server, if the server hasn't pinged it.
One complication: the server is a firewall, looking onto two networks, but with
IP forwarding disabled. I have another machine (NT) on the outside network, but
it too can't find the server until it gets pinged by the server.>
>Do you have the linux machine defined in the windows hosts file?
>
>Matt
>
------------------------------
From: "Cliff" <[EMAIL PROTECTED]>
Subject: Re: DNS setup
Date: Tue, 01 Jun 1999 22:34:57 GMT
RedHat has an installation option for a caching name server. You can
probably install it via rpm package. Sorry, don't know which one. But
first, read the how to in /usr/doc/HOWTO/DNS-HOWTO for a brief intro. A
good book on DNS in particular or TCP/IP in general also helps. O'Reilly
arguably has the best lineup of this sort, though I like "TCP/IP" by Dr.
Feit published by McGraw. I am not connected with any of them.
--
-Cliff
Views expressed are my own and not necessarily those of my employer
Concordia Net, Inc. When replying via email please use; cwheat at concordia
dot net not
root@localhost
Lars Elner wrote in message <[EMAIL PROTECTED]>...
>I've got a small network at home that i until now has managed with the
>"hosts" file. I would like to set up my own DNS server purely for
>educational reasons and because it might make me more of a linux
>hacker......
>
>My network consists of tree computers (so far...). One of them is
>connected to my ISP with a modem. My ISP provides me with 2 name servers
>and a default gateway, my internet ip numbers are dynamic.
>
>I want to be able to manage my network without having to change all the
>hosts files, send mail between users on the different computers and ,
>when hooked up to my ISP all tree computers shall be able to interact
>with the internet.
>
>I currently uses RH 5.2 and would be pleased to get some advise of what
>to do and what to read.
>
>Thank you fore your time !!!
>
------------------------------
From: "CF" <[EMAIL PROTECTED]>
Subject: Re: DNS server problems
Date: Tue, 1 Jun 1999 16:42:24 -0500
Thanks, that was the problem, too many tips from too many books, and other
sources and too many file name changes.
Thanks for the response.
>
> Can you resolve _anything_ outside the zones for which you are
> authoritative for? If not, I'd suspect that your hints file isn't
> up-to-date or your DNS server may be configured so it isn't loading
> it.
>
> Here's the bottom section of my machine here:
>
> zone "." {
> type hint;
> file "root.cache";
> };
>
> The root.cache file may be obtained from
>
> ftp://nic.ddn.mil/netinfo/root-servers.txt
>
>
> --
> +------------------------------------------------+---------------------+
> | Carl Richard Friend (UNIX Sysadmin) | West Boylston |
> | Minicomputer Collector / Enthusiast | Massachusetts, USA |
> | mailto:[EMAIL PROTECTED] | |
> | http://www.ultranet.com/~crfriend/museum/ | ICBM: N42:21 W71:46 |
> +------------------------------------------------+---------------------+
------------------------------
From: [EMAIL PROTECTED] (Kevin)
Crossposted-To: alt.os.linux,comp.os.os2.misc,comp.os.linux.network
Subject: Re: Warning against Announce Communications web hosting
Date: Tue, 01 Jun 1999 21:47:57 GMT
On Tue, 01 Jun 1999 14:26:07 +0200, agner <[EMAIL PROTECTED]>
wrote:
More than likely, you paid the $70 fee already (plus a service charge
probably) when you opened the web hosting account with this company.
More times than not, if you have a web hoster, their main benefit is
they do everything for you, but charge you any fees, plus the
obligatory service charge.
Kevin
>My story is:
>I have bought a domain web site at Announce Communications. In april my
>site went down because mr Hoffman failed to pay the Internic bill. All
>my complaints remained unanswered. After a month I decided that I had to
>move my domain to another ISP. Only after he learned that I was moving
>the domain did I hear from mr Hoffman. Do you think it was an apology?
>Or an offer to refund what I had paid for a faulty service? No - you
>can't guess it. It was a demand that I pay him 70$ for releasing my
>domain! My question is now: is it possible to move the domain without
>his permission? The internic record has my name as registrant, and his
>name as administrative contact.
------------------------------
Date: 01 Jun 1999 23:44:00 +0200
From: [EMAIL PROTECTED] (Detlef Bosau)
Crossposted-To: de.comm.internet.routing
Subject: Re: Linux: ICMP Redirect, IP Source Routing unterdruecken
[EMAIL PROTECTED] meinte am 01.06.99
zum Thema "Re: Linux: ICMP Redirect, IP Source Routing unterdruecken":
> >
> > Richtig. Das entschuldigt aber keine derart schweren
> > Designkunstfehler wie die Positionierung von Workstations und
> > Servern _zwischen_ zwei Routern, abgesehen von HSRP.
>
> Du verkennst die Situation! Manchmal kann man nicht so wie man
> will.
Ich weiss. Aber ich weiss dennoch, was ich will, und ich arbeite daran,
zu koennen. (Ich habe selber solche Situationen. Ich kenne daher
auch die Argumentation. Sie wird dadurch immer noch nicht besser.
Und spaetestens, seitdem mir ein Rechner, auf dem ich keine Administrator-
rechte hatte, durch einen Fehler im gated veraltete LSAs nicht
geloescht hatte und mir damit ein komplettes OSPF Routing zusammen-
gebrochen ist, habe ich gelernt: Solange _ich_ fuer ein Netzwerk
und dessen Funktion den Kopf hinhalte, laeuft Routing auf
Rechnern, auf denen _ich_ Administrator bin. Und damit sind
Rechner, auf denen ich kein Administrator bin, strategisch keine
Router mehr.)
>
> Ja warum denn nicht? Kannst du dir sowas vorstellen: zwei
> SAP-Kunden an zwei versch. Netzwerkifaces und der Weg zum Internet
> (oder was auch immer) ueber ein weiteres iface.
Nein. Ich kann mir vorstellen, dass ein Rechner zwei SAP-Kunden
hat. Und ich habe daraufhin massiv daruf gedraengt, dass
auf einem solchen Rechner jedes Routing, Switching, Bridging unterbleibt.
Man hat das soweit einzusehen gelernt, dass diese Eigenschaft
des _Nicht_routens mittlerweile permanent bei Systemen
von Kunden per Skript und Testprogramm laufend
ueberprueft wird.
Sobald zwei Kunden auf einen SAP Server kommen, ist fuer mich
bei diesem Server jede Funktion als Netzwerkknotenrechner erledigt.
Diese Linie ist einfach, administriebar, jederzeit revisionsfest.
>
> > dann hat er zwei LAN Gateways, macht SAP R/3 und wird ueber
> > zwei SAPROUTER angefahren ;-)
>
> Aeh, ich hab's so verstanden: ein default-gateway ==> ein Router
> bzw. mehrere def.gw ==> mehrere Router
> ^^^^^^^^^^^^^^ was ja nicht sein kann, und damit hatte ich bei
> deiner Aussage ein Problem.
>
Ich schlage vor: _Kein_ Defaultgateway ;-)
> > da sind z.B. Kompetenzreibungsverluste ein wesentliches
> > Kriterium, solche Konstruktionen aufzuloesen.
>
> Du solltest nicht immer nur von deiner Umgebung auf andere
> schlissen! Was fuer dich durchaus O.K. sein mag, ist in einer anderen
> Situation u.U. nicht machbar.
Auch fuer mich ist das nicht einfach machbar. Aber ich strebe doch
zumindest gewisse Ziele an.
> Mir geht es nicht um Kompetenzgerangel, sondern ganz einfach darum,
> im Fehlerfall zu klaeren, wer zustaendig ist. Und das geht i.d.R. in
Mir auch ;-)
> ein paar Minuten, bzw. der Kunde weiss vorab, an wen er sich zu
> wenden hat. (Achtung: ich spreche davon, dass die Kompetenzen auf
> versch. *Firmen* aufgeteilt sind)
;-)
Detlef
--
Detlef Bosau [EMAIL PROTECTED]
Bienroder Weg 79 Tel.: +49 531 303383
D2: +49 172 6819937
38106 Braunschweig, Germany Fax: +49 531 303364
>>>> PGP Public Key als Empfangsbestaetigung <<<<
## CrossPoint v3.1 R ##
------------------------------
From: "Andy Greenshaw" <[EMAIL PROTECTED]>
Subject: PPP to ISP fails
Date: Tue, 1 Jun 1999 17:00:20 +0100
I am having problems connecting to my ISP from Linux. The dial-in is OK and
all initial negotiation is OK, but then my Linux box requests termination of
the link with "No network protocols running".
Below is the relevant contents of the /var/log/messages file.
================
Jun 1 13:33:17 desktop kernel: PPP line discipline registered.
Jun 1 13:33:17 desktop kernel: registered device ppp0
Jun 1 13:33:17 desktop pppd[661]: pppd 2.3.7 started by root, uid 0
Jun 1 13:33:18 desktop chat[665]: abort on (\nBUSY\r)
Jun 1 13:33:18 desktop chat[665]: abort on (\nNO ANSWER\r)
Jun 1 13:33:18 desktop chat[665]: abort on (\nRINGING\r\n\r\nRINGING\r)
Jun 1 13:33:18 desktop chat[665]: send (ATE1QV1^M)
Jun 1 13:33:18 desktop chat[665]: expect (OK)
Jun 1 13:33:18 desktop chat[665]: ATE1QV1^M^M
Jun 1 13:33:18 desktop chat[665]: OK
Jun 1 13:33:18 desktop chat[665]: -- got it
Jun 1 13:33:18 desktop chat[665]: send (ATH0^M)
Jun 1 13:33:19 desktop chat[665]: expect (OK)
Jun 1 13:33:19 desktop chat[665]: ^M
Jun 1 13:33:19 desktop chat[665]: ATH0^M^M
Jun 1 13:33:19 desktop chat[665]: OK
Jun 1 13:33:19 desktop chat[665]: -- got it
Jun 1 13:33:19 desktop chat[665]: send (ATDT08450796699^M)
Jun 1 13:33:19 desktop chat[665]: expect (CONNECT)
Jun 1 13:33:19 desktop chat[665]: ^M
Jun 1 13:33:44 desktop chat[665]: ATDT08450796699^M^M
Jun 1 13:33:44 desktop chat[665]: CONNECT
Jun 1 13:33:44 desktop chat[665]: -- got it
Jun 1 13:33:44 desktop chat[665]: send (^M)
Jun 1 13:33:44 desktop chat[665]: expect (ogin:)
Jun 1 13:33:44 desktop chat[665]: 42666/ARQ^M
Jun 1 13:33:45 desktop chat[665]: ^M
Jun 1 13:33:45 desktop chat[665]: ^M
Jun 1 13:33:45 desktop chat[665]: User Access Verification^M
Jun 1 13:33:45 desktop chat[665]: ^M
Jun 1 13:33:45 desktop chat[665]: login:
Jun 1 13:33:45 desktop chat[665]: -- got it
Jun 1 13:33:45 desktop chat[665]: send (???????????????^M)
Jun 1 13:33:45 desktop chat[665]: expect (assword:)
Jun 1 13:33:45 desktop chat[665]: ^M
Jun 1 13:33:45 desktop chat[665]: login: ???????????^M
Jun 1 13:33:45 desktop chat[665]: Password:
Jun 1 13:33:45 desktop chat[665]: -- got it
Jun 1 13:33:45 desktop chat[665]: send (????????????^M)
Jun 1 13:33:45 desktop chat[665]: expect (system.)
Jun 1 13:33:46 desktop chat[665]: ^M
Jun 1 13:33:46 desktop chat[665]: Entering PPP mode.^M
Jun 1 13:33:46 desktop chat[665]: Async interface address is unnumbered
(FastEthernet0)^M
Jun 1 13:33:46 desktop chat[665]: Your IP address is 62.136.161.36. MTU is
1500 bytes^M
Jun 1 13:33:46 desktop chat[665]: Header compression will match your
system.
Jun 1 13:33:46 desktop chat[665]: -- got it
Jun 1 13:33:46 desktop chat[665]: send (^M)
Jun 1 13:33:46 desktop kernel: ppp_ioctl: set dbg flags to 70000
Jun 1 13:33:46 desktop kernel: ppp_ioctl: set flags to 70000
Jun 1 13:33:46 desktop kernel: ppp_tty_ioctl: set xasyncmap
Jun 1 13:33:46 desktop kernel: ppp_tty_ioctl: set xmit asyncmap ffffffff
Jun 1 13:33:46 desktop kernel: ppp_ioctl: set flags to 70000
Jun 1 13:33:46 desktop kernel: ppp_ioctl: set mru to 5dc
Jun 1 13:33:46 desktop kernel: ppp_tty_ioctl: set rcv asyncmap ffffffff
Jun 1 13:33:46 desktop kernel: ppp_ioctl: set flags to 70000
Jun 1 13:33:46 desktop pppd[661]: Serial connection established.
Jun 1 13:33:46 desktop pppd[661]: Using interface ppp0
Jun 1 13:33:46 desktop pppd[661]: Connect: ppp0 <--> /dev/modem
Jun 1 13:33:47 desktop kernel: ppp_tty_ioctl: set xmit asyncmap a0000
Jun 1 13:33:47 desktop kernel: ppp_ioctl: set flags to f070003
Jun 1 13:33:47 desktop kernel: ppp_ioctl: set mru to 5dc
Jun 1 13:33:47 desktop kernel: ppp_tty_ioctl: set rcv asyncmap 0
Jun 1 13:33:47 desktop kernel: ppp_ioctl: set flags to f070003
Jun 1 13:33:47 desktop kernel: ppp_tty_ioctl: set xmit asyncmap ffffffff
Jun 1 13:33:47 desktop kernel: ppp_ioctl: set flags to f070000
Jun 1 13:33:47 desktop kernel: ppp_ioctl: set mru to 5dc
Jun 1 13:33:47 desktop kernel: ppp_tty_ioctl: set rcv asyncmap 0
Jun 1 13:33:47 desktop kernel: ppp_ioctl: set flags to f070000
Jun 1 13:33:47 desktop pppd[661]: Connection terminated.
Jun 1 13:33:47 desktop pppd[661]: Connect time 0.1 minutes.
Jun 1 13:33:47 desktop kernel: ppp: channel ppp0 closing.
Jun 1 13:33:48 desktop pppd[661]: Exit.
====================
And here is what appears on screen:
====================
Serial connection established.
Using interface ppp0
Connect: ppp0 <--> /dev/modem
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x23eac2b9> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x42 <asyncmap 0xa0000> <magic 0x209e88c5> <pcomp>
<accomp> < 11 04 05 f4> < 13 11 01 46 52 45 45 2d 4d 55 4c 54 49 4c 49 4e
4b>]
sent [LCP ConfRej id=0x42 < 11 04 05 f4> < 13 11 01 46 52 45 45 2d 4d 55 4c
54 49 4c 49 4e 4b>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x23eac2b9> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x43 <asyncmap 0xa0000> <magic 0x209e88c5> <pcomp>
<accomp>]
sent [LCP ConfAck id=0x43 <asyncmap 0xa0000> <magic 0x209e88c5> <pcomp>
<accomp>]
sent [LCP TermReq id=0x2 "No network protocols running"]
rcvd [LCP TermAck id=0x2]
Connection terminated.
Connect time 0.1 minutes.
===================
Any help much appreciated.
------------------------------
From: [EMAIL PROTECTED]
Crossposted-To: force9.tech.linux
Subject: Re: Telnet again
Date: 31 May 1999 17:30:59 GMT
Hugh Saunders <[EMAIL PROTECTED]> wrote:
> I got there at about 5 this morning!
> What I don't understand is: although stopping people from logging in as root
> is probably a security measure, why is it any more secure to let me log in
> as a user and su?
Two reasons:
One: It means that someone has to comprimise two accounts on your box,
both a user account and the root account.
Two: It makes trying to use packet sniffers to grab the root password much
more difficult.
Stu is sure there are others too
--
>From the prompt of Stu Teasdale
You are in a maze of little twisting passages, all alike.
------------------------------
From: [EMAIL PROTECTED] (Meling Mudin)
Subject: fetchmail and ftp+IP-Masquerade problems
Date: 1 Jun 1999 22:37:19 GMT
Hi,
I managed to get sendmail working on my teeny-weeny home LAN.
However, fetchmail does not work. I get this error:
fetchmail: skipping poll of mail.excite.com, eth0/10.1.2.8 IP address
excluded
fetchmail: normal termination, status 0
Here's my .fetchmailrc:
poll mail.excite.com
interface "eth0/10.1.2.8"
proto pop3
username myusername with pass mypasswd is meling here
forcecr smtpaddress localhost
fetchall
My machine (10.1.2.9) is connected to the internet via another linux
box (10.1.2.8) which acts as a gateway.
Another problem is that I cannot fetch any files when using ftp.
I managed to get a connection, but whenever I typed 'ls' on the
remote ftp server, I get '..illegal port..' error. But this does not
happen when I ftp'ed from the gateway machine.
Any ideas?
-mel
------------------------------
From: "TURBO1010" <[EMAIL PROTECTED]>
Subject: Re: IP Masq and Port Forwarding
Date: Tue, 1 Jun 1999 15:15:13 -0700
If you got the RMP, just install it rpm -i *.rpm
Aaron Fransen <[EMAIL PROTECTED]> wrote in message
news:94T43.40742$[EMAIL PROTECTED]...
> Thanks for the info. Got the RPM and have it installed now, but I have
> another stupid newbie question. How do I compile it?
>
> I can do the kernel no problem, but I've never had to compile an
individual
> module before. I think I've got all the required support compiled into the
> kernel, but what else might I need?
>
>
> Matt Goebel <[EMAIL PROTECTED]> wrote in message
> news:7ivc45$54a$[EMAIL PROTECTED]...
> > http://www.rpmfind.net/
> > It's on this site along with almost ever rpm you could ever need. I
> believe
> > 4.1.2 is the lastest version. You may need to recompile your kernel to
> get
> > this to work also.
> > Aaron Fransen <[EMAIL PROTECTED]> wrote in message
> > news:4dz43.40062$[EMAIL PROTECTED]...
> > > Hiya all.
> > >
> > > Here's the deal: I've installed Caldera 2.2 and configured it for
> firewall
> > > (and IP Masq). It uses two NICs...one for the Internet, one for the
> > internal
> > > network.
> > >
> > > I need to pass port 25 through to our internal mail server, but I
> haven't
> > > been able to find the IPMASQADM tool anywhere. The link to the linuxhq
> > site
> > > is down.
> > >
> > > Any ideas where else I could get this?
> > >
> > > Thanks!
> > >
> > >
> >
> >
>
>
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list (and comp.os.linux.networking) via:
Internet: [EMAIL PROTECTED]
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Networking Digest
******************************
