Hello there,

I am trying to setup a 2 machines TCP/IP LAN. I have read carefully
the NET-3 HOWTO and the Intranet HOWTO (among others), and I think I
followed all indications. It doesn't work, I have no clue where to
investigate further the problem, so let me say a bit more in case some
good soul in here could suggest me something.

As you'll see below, it seems that about EVERYTHING works (including
the hardware), except than I cannot even ping a machine from the other
:-). If someone could suggest me further tests to help me identify the
problem, I'd be grateful.

Set-up:

- one machine is named "phat" (IP 192.168.1.1), has RedHat 5.0
- the other is named "admin" (IP 192.168.1.2), has Win95 with MS-TCP/IP
- local domain name is corcise
- netmask in both machines is 255.255.255.0

What doesn't work:

- I cannot successfully ping phat from admin or admin from phat (and
  so no other networking works either).

What does work:

- DNS looks OK, on both machines the name addres is resolved into the
  right IP address (phat=162.198.1.1, admin=162.198.1.2); I've set a
  netmask of 255.255.255.0 on both machines.

- the hardware looks OK, as the LAN does work if I boot phat in Win95
  (NetBeui LAN);

- I can ping localhost fine on both machines

- when I ping phat on admin, ping fails (times out), but the phat LAN
  adapter led blinks in rythm with the ping packets sent (also true in
  the other way, ie when I ping admin from phat).

- on phat, some command (I've forgotten which one), that reports bytes
  sent to and received from an interface, reports the bytes sent when
  I ping admin from phat; and the bytes received when I ping phat from
  admin

- also note that I did manage to make the link work some months ago
  with the same hardware (some guru no more available made it work
  using forgotten incantations).

- I connect to the INternet fine with both machines (each has its modem)

Some outputs on phat (the Linux box):


/home/jacques 1010 # ping admin
PING admin.corcise (192.168.1.2): 56 data bytes
[hangs; then when interrupted reports:]
--- admin.corcise ping statistics ---
9 packets transmitted, 0 packets received, 100% packet loss


/home/jacques 1012 # ifconfig
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Bcast:127.255.255.255  Mask:255.0.0.0
          UP BROADCAST LOOPBACK RUNNING  MTU:3584  Metric:1
          RX packets:389 errors:0 dropped:0 overruns:0
          TX packets:389 errors:0 dropped:0 overruns:0

eth0      Link encap:Ethernet  HWaddr 00:00:E8:DE:CA:BB
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:198 errors:0 dropped:0 overruns:0
          TX packets:79 errors:0 dropped:0 overruns:0
          Interrupt:11 Base address:0x6500 


/home/jacques 1013 # route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.1.0     phat.corcise    255.255.255.0   UG    0      0        4 eth0
192.168.1.0     *               255.255.255.0   U     0      0        0 eth0
127.0.0.0       *               255.0.0.0       U     0      0        7 lo


Don't hesitate to ask me for more information in case you think it
could be useful.

Any help appreciated,

Jacques Du Pasquier

Reply via email to