> The config from win95 may not work. Since this card is a PnP, it has some
> default values for port, irq, etc. These defaults may not be the ones in
> w95. To set the parameters of the card to these, you need to use another
> program, called isapnptools, available from sunsite. Or maybe you can try
> to find out what are the default values for irq and i/o port by just trying
> with setserial.
Do you mean with setserial -g, cuz this gives me the same info as in
Win95 or should I
try autoconfig
> The documents that come with isapnptools will help. I was
> using isapnptools before, but then, after finding the default values for
> the card, I just turned off PnP os installed option from the bios, and
> started using the card without isapnptools.
>Also note that you need to set
> the uart with setserial, otherwise it won't work. A quick try can be echo
> ATDT>/dev/modem. This should open the line. Another ATDT will hangup.
if i don't use isapnp i need to know the default values (setserial) and
set them using setserial. would this set the uart at the same time?.
Also aside from setserial and minicom are
they any other tools to test the modem
>
> Hope this helps,
> BS
--
If you don't stand for something, you'll fall for anything
17728385
- PUBLIC ENEMY
RH5
