I've just installed Kde from rpm binaries files on RedHat 5.1 in the
proper sequence.
I'd setup my "PATH" on /etc/profile to: "/opt/kde" and added:
KDEDIR=/opt/kde
export KDEDIR
in "/etc/profile".
Also added an "~/.Xclients" with the following content:
/opt/kde/bin/startkde
But when I run "startx" I get some error messages (SEE ATTACHMENT,
please) and system goes back to console.
It seems it's _almost_ ready -but not at all- to run, and it does not.
My two questions are:
1.- Perhaps obvious: What am I missing?
I guess something is wrong with my qt-1.44-libraries. Maybe? Error
messages are attached.
2.- The Installation instructions say the following:
---------------- begin ----------------
"First of all, make sure that you have added KDE's binary installation
directory (e.g. /opt/kde/bin) to your PATH and KDE's library
installation directory to your LD_LIBRARY_PATH (only necessary on
systems that do not support rpath; on Linux ELF, it should work without)
this environment variable may be called differently on some systems,
e.g. it is called SHLIB_PATH on Irix). Then set the environment variable
KDEDIR to the base of your KDE tree, e.g. /opt/kde."
---------------- end ----------------
So I ask: what is the "LD_LIBRARY_PATH" and what is a "Linux ELF" ??? Is
redhat a Linux ELF???
Should I add this library path? and how/where???
--
Jos� Albores
Buenos Aires.
Argentina.
XFree86 Version 3.3.2.3 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: July 15 1998
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.34 i686 [ELF]
Configured drivers:
S3V: accelerated server for S3 graphics adaptors (Patchlevel 0)
s3_ViRGE
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200
(**) Mouse: buttons: 3, 3 button emulation (timeout: 50ms)
(**) S3V: Graphics device ID: "ViRGE/DX or /GX"
(**) S3V: Monitor ID: "My Monitor"
(--) S3V: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) S3V: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) S3V: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) S3V: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) S3V: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) S3V: Invalid vertical timing for mode "400x300". Deleted.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(--) S3V: PCI: ViRGE/DX or /GX rev 1, Linear FB @ 0xec000000
(--) S3V: chipset: ViRGE/DX rev. 1
(--) S3V: chipset driver: s3_ViRGE
(--) S3V: videoram: 4096k
(--) S3V: Ramdac type: s3_trio64
(--) S3V: Ramdac speed: 170 MHz (135 MHz for 32 bpp)
(--) S3V: Using Trio32/64 programmable clock (MCLK 50.114 MHz)
(--) S3V: Maximum allowed dot-clock: 135.000 MHz
(**) S3V: Mode "800x600": mode clock = 50.000
(**) S3V: Using packed 24 bpp. Color weight: 888
(**) S3V: Virtual resolution set to 800x600
(--) S3V: Local bus LAW is 0xEC0xxxxx
(--) S3V: Using a banksize of 4096k, line width of 800
kaudioserver: can't resolve symbol '_vt.11QPushButton'
kaudioserver: can't resolve symbol '_vt.11QPushButton.12QPaintDevice'
kwmsound: can't resolve symbol '_vt.11QPushButton'
kwmsound: can't resolve symbol '_vt.11QPushButton.12QPaintDevice'
kaudioserver: can't resolve symbol '_vt.7QSlider.12QPaintDevice'
kaudioserver: can't resolve symbol '_vt.7QSlider'
kaudioserver: can't resolve symbol '_vt.6QFrame'
kaudioserver: can't resolve symbol '_vt.6QFrame.12QPaintDevice'
kaudioserver: can't resolve symbol '_vt.4QTab'
kaudioserver: can't resolve symbol '_vt.11QPushButton'
kaudioserver: can't resolve symbol '_vt.7QSlider.13QRangeControl'
kaudioserver: can't resolve symbol '_vt.5QDate'
kaudioserver: can't resolve symbol '_vt.11QPushButton.12QPaintDevice'
kwmsound: can't resolve symbol '_vt.7QSlider.12QPaintDevice'
kwmsound: can't resolve symbol '_vt.7QSlider'
kwmsound: can't resolve symbol '_vt.6QFrame'
kwmsound: can't resolve symbol '_vt.6QFrame.12QPaintDevice'
kwmsound: can't resolve symbol '_vt.4QTab'
kwmsound: can't resolve symbol '_vt.11QPushButton'
kwmsound: can't resolve symbol '_vt.7QSlider.13QRangeControl'
kwmsound: can't resolve symbol '_vt.5QDate'
kwmsound: can't resolve symbol '_vt.11QPushButton.12QPaintDevice'
kfm: can't resolve symbol '_vt.7QSlider.12QPaintDevice'
kfm: can't resolve symbol '_vt.7QSlider'
kfm: can't resolve symbol '_vt.6QFrame'
kfm: can't resolve symbol '_vt.6QFrame.12QPaintDevice'
kfm: can't resolve symbol '_vt.4QTab'
kfm: can't resolve symbol '_vt.7QSlider.13QRangeControl'
kfm: can't resolve symbol '_vt.5QDate'
kcontrol: can't resolve symbol '_vt.11QPushButton'
kcontrol: can't resolve symbol '_vt.11QPushButton.12QPaintDevice'
kcontrol: can't resolve symbol '_vt.7QSlider.12QPaintDevice'
kcontrol: can't resolve symbol '_vt.7QSlider'
kcontrol: can't resolve symbol '_vt.6QFrame'
kcontrol: can't resolve symbol '_vt.6QFrame.12QPaintDevice'
kcontrol: can't resolve symbol '_vt.4QTab'
kcontrol: can't resolve symbol '_vt.11QPushButton'
kcontrol: can't resolve symbol '_vt.7QSlider.13QRangeControl'
kcontrol: can't resolve symbol '_vt.5QDate'
kcontrol: can't resolve symbol '_vt.11QPushButton.12QPaintDevice'
kbgndwm: can't resolve symbol '_vt.11QPushButton'
kbgndwm: can't resolve symbol '_vt.11QPushButton.12QPaintDevice'
kbgndwm: can't resolve symbol '_vt.7QSlider.12QPaintDevice'
kbgndwm: can't resolve symbol '_vt.7QSlider'
kbgndwm: can't resolve symbol '_vt.6QFrame'
kbgndwm: can't resolve symbol '_vt.6QFrame.12QPaintDevice'
kbgndwm: can't resolve symbol '_vt.4QTab'
kbgndwm: can't resolve symbol '_vt.11QPushButton'
kbgndwm: can't resolve symbol '_vt.7QSlider.13QRangeControl'
kbgndwm: can't resolve symbol '_vt.5QDate'
kbgndwm: can't resolve symbol '_vt.11QPushButton.12QPaintDevice'
krootwm: can't resolve symbol '_vt.11QPushButton'
krootwm: can't resolve symbol '_vt.11QPushButton.12QPaintDevice'
krootwm: can't resolve symbol '_vt.7QSlider.12QPaintDevice'
krootwm: can't resolve symbol '_vt.7QSlider'
krootwm: can't resolve symbol '_vt.6QFrame'
krootwm: can't resolve symbol '_vt.6QFrame.12QPaintDevice'
krootwm: can't resolve symbol '_vt.4QTab'
krootwm: can't resolve symbol '_vt.11QPushButton'
krootwm: can't resolve symbol '_vt.7QSlider.13QRangeControl'
krootwm: can't resolve symbol '_vt.5QDate'
krootwm: can't resolve symbol '_vt.11QPushButton.12QPaintDevice'
kpanel: can't resolve symbol '_vt.7QSlider.12QPaintDevice'
kpanel: can't resolve symbol '_vt.7QSlider'
kpanel: can't resolve symbol '_vt.4QTab'
kpanel: can't resolve symbol '_vt.7QSlider.13QRangeControl'
kpanel: can't resolve symbol '_vt.5QDate'
kpanel: can't resolve symbol '_vt.6QFrame'
kwm: can't resolve symbol '_vt.6QFrame'
waiting for X server to shut down
