Hi, Ray: Thanks. Slackware 3.9 kernel 2.0.37pre10 ttyS0,1,2,3 3f8,2f8,3e8,2e8 using irq 4,3,5,11 8530 card at 0x300 irq 7 (DRSI type 2) SoundBlaster @ 0x230 irq 10 The NE2000 clone (DOS) software chose 0x260 irq 12 and its test program said the card passed. It is connected to a hub shared by 4 other workstations. Ray Olszewski wrote: > > Which Slackware kernel are you using (or if you compiled your own, how did > you provide for NE2000 support)? I'll attach my .config file for your and/or anyone's perusal. > Some pre-compiled Slackware kernels (e.g, bare.i) have NE2000 support > compiled in, while others (e.g., scsi.s) require that it be configured as a > module. The built-ins usually probe successfully for an NE2000 (though your > IO base isn't the usual 0x300, so that might be causing the probe to fail), > while modules usually require you at provide at least the IO base with an > entry like: I started with sbpcd.i cuz I have an old 2xCDROM (Creative Labs - Sound Blaster - Matsushita CR-563) I've copies the /slakware/* to /dev/hdb5 (-t msdos) so I could install again using bare.i. I'll try your suggestion (below) next. I'll rerun 'make config' and change my NET/NE2000 support to 'M' instead of 'Y'. > > modprobe ne io=0x260 irq=0xB > > The easiest thing for you to do, I imagine, would be to uncomment the "ne" > line in /etc/rc.d/rc.modules and fill in the blanks as above. > > At 04:41 PM 7/18/99 -0400, Charles E Gelm wrote [in part]: > > I'm installing kernel 2.0.37pre10 (slackware-3.9) on a 486dx66 32 > >Megabytes of RAM, > >My NIC is a ne2000 clone at 0x260 irq 12 > >My kernel does find the NIC it when it boots. How can I get my kernel > >to find this NIC ? > > I assume you meant "does not" above, not "does". Yea. I meant does not. :-| Chuck > > ------------------------------------"Never tell me the odds!"--- > Ray Olszewski -- Han Solo > Palo Alto, CA 94303-3603 [EMAIL PROTECTED] > ----------------------------------------------------------------
# # Automatically generated make config: don't edit # # # Code maturity level options # CONFIG_EXPERIMENTAL=y # # Loadable module support # CONFIG_MODULES=y # CONFIG_MODVERSIONS is not set CONFIG_KERNELD=y # # General setup # # CONFIG_MATH_EMULATION is not set CONFIG_MEM_STD=y # CONFIG_MEM_ENT is not set # CONFIG_MEM_SPECIAL is not set CONFIG_MAX_MEMSIZE=1024 CONFIG_NET=y # CONFIG_MAX_16M is not set # CONFIG_PCI is not set CONFIG_SYSVIPC=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_JAVA is not set CONFIG_KERNEL_ELF=y # CONFIG_M386 is not set CONFIG_M486=y # CONFIG_M586 is not set # CONFIG_M686 is not set # # Floppy, IDE, and other block devices # CONFIG_BLK_DEV_FD=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_BLK_DEV_IDE_PCMCIA is not set CONFIG_BLK_DEV_CMD640=y # CONFIG_BLK_DEV_CMD640_ENHANCED is not set # CONFIG_IDE_CHIPSETS is not set # # Additional Block Devices # CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_MD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_PARIDE is not set # CONFIG_BLK_DEV_HD is not set # # Networking options # CONFIG_FIREWALL=y CONFIG_NET_ALIAS=y CONFIG_INET=y CONFIG_IP_FORWARD=y CONFIG_IP_MULTICAST=y # CONFIG_SYN_COOKIES is not set CONFIG_IP_FIREWALL=y # CONFIG_IP_FIREWALL_VERBOSE is not set CONFIG_IP_MASQUERADE=y # # Protocol-specific masquerading support will be built as modules. # CONFIG_IP_MASQUERADE_IPAUTOFW=y # CONFIG_IP_MASQUERADE_PPTP is not set # CONFIG_IP_MASQUERADE_IPSEC is not set CONFIG_IP_MASQUERADE_ICMP=y # CONFIG_IP_TRANSPARENT_PROXY is not set CONFIG_IP_ALWAYS_DEFRAG=y # CONFIG_IP_ACCT is not set # CONFIG_IP_ROUTER is not set # CONFIG_NET_IPIP is not set # CONFIG_IP_MROUTE is not set # CONFIG_IP_ALIAS is not set # # (it is safe to leave these untouched) # # CONFIG_INET_PCTCP is not set # CONFIG_INET_RARP is not set # CONFIG_NO_PATH_MTU_DISCOVERY is not set CONFIG_IP_NOSR=y CONFIG_SKB_LARGE=y # # # CONFIG_IPX=y # CONFIG_ATALK is not set # CONFIG_AX25 is not set # CONFIG_BRIDGE is not set # CONFIG_NETLINK is not set # # SCSI support # # CONFIG_SCSI is not set # # Network device support # CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_EQUALIZER is not set # CONFIG_DLCI is not set # CONFIG_PLIP is not set CONFIG_PPP=y # # CCP compressors for PPP are only built as modules. # # CONFIG_SLIP is not set # CONFIG_NET_RADIO is not set CONFIG_NET_ETHERNET=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_PCI is not set CONFIG_NET_ISA=y # CONFIG_LANCE is not set # CONFIG_AT1700 is not set # CONFIG_E2100 is not set # CONFIG_DEPCA is not set # CONFIG_EWRK3 is not set # CONFIG_EEXPRESS is not set # CONFIG_EEXPRESS_PRO is not set # CONFIG_FMV18X is not set # CONFIG_HPLAN_PLUS is not set # CONFIG_HPLAN is not set # CONFIG_HP100 is not set # CONFIG_ETH16I is not set CONFIG_NE2000=y # CONFIG_NI52 is not set # CONFIG_NI65 is not set # CONFIG_SEEQ8005 is not set # CONFIG_SK_G16 is not set # CONFIG_NET_EISA is not set # CONFIG_NET_POCKET is not set # CONFIG_TR is not set # CONFIG_FDDI is not set # CONFIG_ARCNET is not set # CONFIG_SHAPER is not set # CONFIG_RCPCI is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # CD-ROM drivers (not for SCSI or IDE/ATAPI drives) # CONFIG_CD_NO_IDESCSI=y # CONFIG_AZTCD is not set # CONFIG_GSCD is not set CONFIG_SBPCD=y # CONFIG_SBPCD2 is not set # CONFIG_MCD is not set # CONFIG_MCDX is not set # CONFIG_OPTCD is not set # CONFIG_CM206 is not set # CONFIG_SJCD is not set # CONFIG_CDI_INIT is not set # CONFIG_CDU31A is not set # CONFIG_CDU535 is not set # # Filesystems # CONFIG_QUOTA=y CONFIG_MINIX_FS=y # CONFIG_EXT_FS is not set CONFIG_EXT2_FS=y # CONFIG_XIA_FS is not set CONFIG_NLS=y CONFIG_ISO9660_FS=y CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y # CONFIG_UMSDOS_FS is not set CONFIG_VFAT_FS=y # # Select available code pages # # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set CONFIG_PROC_FS=y CONFIG_NFS_FS=y # CONFIG_ROOT_NFS is not set CONFIG_SMB_FS=y CONFIG_SMB_WIN95=y # CONFIG_NCP_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_UFS_FS is not set # # Character devices # CONFIG_SERIAL=y # CONFIG_SERIAL_PCI is not set # CONFIG_DIGI is not set # CONFIG_CYCLADES is not set # CONFIG_ISI is not set # CONFIG_STALDRV is not set # CONFIG_RISCOM8 is not set # CONFIG_PRINTER is not set # CONFIG_SPECIALIX is not set # CONFIG_MOUSE is not set # CONFIG_UMISC is not set # CONFIG_QIC02_TAPE is not set CONFIG_FTAPE=y # # Set IObase/IRQ/DMA for ftape in ./drivers/char/ftape/Makefile # # CONFIG_APM is not set # CONFIG_WATCHDOG is not set CONFIG_RTC=y # # Sound # # CONFIG_SOUND is not set # # Kernel hacking # # CONFIG_PROFILE is not set
