hi,
I am trying to setup ppp connection with BellSouth ISP. It is assumed using
PAP. Here is the error log I got:
Jul 29 08:34:07 rg chat[2347]: ATDT5555555^M^M
Jul 29 08:34:07 rg chat[2347]: CONNECT
Jul 29 08:34:07 rg chat[2347]: -- got it
Jul 29 08:34:07 rg chat[2347]: send (^M)
Jul 29 08:34:07 rg chat[2347]: timeout set to 5 seconds
Jul 29 08:34:07 rg chat[2347]: expect (~)
Jul 29 08:34:07 rg chat[2347]: 52000/ARQ/V90/LAPM/V42BIS^M
Jul 29 08:34:12 rg chat[2347]: alarm
Jul 29 08:34:12 rg chat[2347]: send (^M)
Jul 29 08:34:12 rg pppd[2345]: Serial connection established.
Jul 29 08:34:12 rg pppd[2345]: Using interface ppp0
Jul 29 08:34:12 rg pppd[2345]: Connect: ppp0 <--> /dev/modem
Jul 29 08:34:13 rg pppd[2345]: sent [LCP ConfReq id=0x1 <magic 0xa6984c04>
<pcomp> <accomp>]
Jul 29 08:34:40 rg last message repeated 9 times
Jul 29 08:34:43 rg pppd[2345]: LCP: timeout sending Config-Requests
Jul 29 08:34:43 rg pppd[2345]: Connection terminated.
Jul 29 08:34:43 rg pppd[2345]: Receive serial link is not 8-bit clean:
Jul 29 08:34:43 rg pppd[2345]: Problem: all had bit 7 set to 0
Jul 29 08:34:44 rg pppd[2345]: Exit.
configure tool: netconf. dist: Redhat6.0. pppd: 2.3.8 kernel: 2.2.9
Please shed some light on it.
thx,
Weizhong
