Hello All,
A couple of days ago I asked you to redirect the errormessages Xserver
gave me.
My Xserver doesn't start anymore. And as far as I know, I haven't
changed a bit. Well, most probably I have, otherwise it would still
function ;-)
Hold on, here the messages come...
XFree86 Version 3.3.3.1 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 4 1999
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.1-ac1 i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 0):
NV1, STG2000, RIVA128, RIVATNT, ET4000, ET4000W32, ET4000W32i,
ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000,
ET6100,
et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31,
wd90c33,
gvga, ati, sis86c201, sis86c202, sis86c205, sis86c215, sis86c225,
sis5597, sis5598, sis6326, tvga8200lx, tvga8800cs, tvga8900b,
tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b,
tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi,
tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685,
cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, 3dimage975,
3dimage985, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428,
clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480,
clgd5462,
clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235,
clgd7541,
clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22,
ncr77c22e,
cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200,
mgag100, oti067, oti077, oti087, oti037c, al2101, ali2228,
ali2301,
ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7,
ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, s3_virge,
AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097,
NM2160,
NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545,
ct65546,
ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,
ct64300, mediagx, V1000, V2x00, p9100, spc8110, generic
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "My Video Card"
(**) SVGA: Monitor ID: "My Monitor"
(--) SVGA: Mode "1024x768" needs vert refresh rate of 86.96 Hz. Deleted.
(--) SVGA: Mode "640x400" needs vert refresh rate of 85.08 Hz. Deleted.
(--) SVGA: Mode "640x480" needs vert refresh rate of 75.00 Hz. Deleted.
(--) SVGA: Mode "640x480" needs vert refresh rate of 85.01 Hz. Deleted.
(--) SVGA: Mode "1152x864" needs vert refresh rate of 89.18 Hz. Deleted.
(--) SVGA: Mode "800x600" needs vert refresh rate of 72.19 Hz. Deleted.
(--) SVGA: Mode "640x480" needs vert refresh rate of 100.02 Hz. Deleted.
(--) SVGA: Mode "800x600" needs vert refresh rate of 84.99 Hz. Deleted.
(--) SVGA: Mode "1280x1024" needs vert refresh rate of 87.59 Hz.
Deleted.
(--) SVGA: Mode "800x600" needs vert refresh rate of 100.03 Hz. Deleted.
(--) SVGA: Mode "1024x768" needs vert refresh rate of 75.94 Hz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(--) SVGA: Mode "512x384" needs vert refresh rate of 77.97 Hz. Deleted.
(--) SVGA: Mode "512x384" needs vert refresh rate of 85.09 Hz. Deleted.
(--) SVGA: Mode "320x240" needs vert refresh rate of 75.14 Hz. Deleted.
(--) SVGA: Mode "400x300" needs vert refresh rate of 72.19 Hz. Deleted.
(--) SVGA: Mode "480x300" needs vert refresh rate of 72.07 Hz. Deleted.
(**) FontPath set to "unix/:-1"
(--) SVGA: PCI: Tseng Labs ET6000/6100 rev 48, Memory @ 0xe4000000, I/O
@ 0x6800
(--) SVGA: ET6000: Using built-in programmable Clock Chip/RAMDAC
(ID=0x84)
(--) SVGA: ET6000: Detected 4096 kb of multi-bank DRAM
(--) SVGA: Ramdac: et6000
(--) SVGA: Only 4088 kb of memory can be used in linear + accelerated
mode on ET6000/6100/6300.
(--) SVGA: ET6000: MClk: 91.87 MHz, R/C: 0x15
(--) SVGA: chipset: ET6000
(--) SVGA: videoram: 4088k
(**) SVGA: Using 16 bpp, Depth 16, Color weight: 565
(--) SVGA: Maximum allowed dot-clock: 112.500 MHz
(**) SVGA: Mode "1024x768": mode clock = 75.000
(--) SVGA: Virtual resolution set to 1024x768
(--) SVGA: ET6000: Using linear framebuffer at 0xE4000000.
(--) SVGA: ET4000: SpeedUps selected (Flags=0x30)
(--) SVGA: Using 5kb of unused display memory for extra acceleration
functions.
(--) SVGA: XAA/Tseng: Using ET6000-specific Color-expansion
(WriteBitmap, FillRect(Opaque)Stippled).
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 pattern fill
(--) SVGA: XAA: Indirect CPU to screen color expansion (bitmap, stipple,
imagetext, polytext)
(--) SVGA: XAA: Using 8 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and non-transparent stipples
(--) SVGA: XAA: General lines and segments
_FontTransSocketUNIXConnect: Can't connect: errno = 111
failed to set default font path 'unix/:-1'
Fatal server error:
could not open default font 'fixed'
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
X connection to :0.0 broken (explicit kill or server shutdown).
Why is all of a sudden my font missing? Or why can't it be opened? Even
better: How do I solve this and prevent it from happening again?
BTW: it is RedHat 6.0, running on a PII/333. It worked without any
problems, but after a reboot... my screen starts flickering, probably
Xwindows initializing, dying, re-initializing, dying, etc etc. I've
watched this for 5 minutes, still the same. I have to use LILO to get to
init 3 in order to be able to work with my linuxbox. (now I know my way
around with "init" and the several run-levels. Was it good for something
;-)
A re-install will fix it, but according to the guru's here, that's
almost never necessary.
Thanks.
David.
