I have 2 HD's, Using RedHat 6.1. First and main drive is /dev/hda
Second is /dev/hdb
Here is copy of my /hda2/etc/fstab;
/dev/hda2               /                       ext2    defaults        1 1
/dev/hda1               /mnt/dos                vfat    defaults        0 0
/dev/hdb1               /mnt/hdb1               ext2    defaults        1 2
/dev/hdb2               /mnt/hdb2               ext2    defaults       1 2
/dev/hdb3               swap                    swap    defaults        0 0
/dev/fd0                /mnt/floppy             msdos   owner,noauto    0 0
/dev/cdrom              /mnt/cdrom              iso9660 owner,noauto,ro 0 0
none                    /proc                   proc    defaults        0 0
none                    /dev/pts                devpts  gid=5,mode=620        0 0
------------------------ 

Here is copy of my /dev/hda2/etc/lilo.conf
boot=/dev/hda
map=/boot/map
install=/boot/boot.b
prompt
   vga = ask
timeout=50
default=rh61-a

image=/boot/vmlinuz-2.2.12-20
        label=linux
        initrd=/boot/initrd-2.2.12-20.img
        read-only
        root=/dev/hda2

# image=/dev/hdb2/boot/vmlinuz-2.2.12-20
#         label=linux2
#         initrd=/dev/hdb2/boot/initrd-2.2.12.20.img
#         read-only
#         root=/dev/hdb2

other=/dev/hda1
        label=dos

# other=/dev/hdb
#         table = /dev/hdb2
#         label = boot2

-----------------------------------

I have installed R.H. 6.1 on my /dev/hdb2 and have a floppy boot that will
boot to it OK. My /dev/hda is a 1.6 gig W.D. and the /dev/hdb is a Fujitsu
3.2 gig drive.

I have been all thru the various man pages and the
/usr/doc/HOWTO/mini/LILO file and have not found a good example of setting
up lilo.conf to allow booting to the second hd.

The above copy of lilo.conf (with the '# ' removed) will not work when I
run lilo,  The error msg I get is that;
'Added linux
 open /dev/hdb2/boot/vmlinux-2.2.21-20: Not a directory'

After running that I attemp to boot using at prompt 'boot2' and that wont
work, If I hit tab then it only lists linux and dos.

According to the mini HOWTO on lilo it says 'other files and labels are
allowed.

Note that I can boot to second drive using the boot floppy but that is a
bother and rather have it an altenate boot from regular lilo.

If I had a good example to emulate I would appreciate it.  I have trouble
understanding all the man files.

Warren
             * |     Warren Hrach, SanDiego, CA 92107 | *
             * | [EMAIL PROTECTED] Linux & BBBS on an AMD K5 | *
             * |          BBS at (619}224-4878               | *

Reply via email to