On Sun, 13 Feb 2000, Frank wrote:
> I hope somebody can help with a slight problem.
>
> I have configured XF86Config in RH6.1 by means of Xconfigurator. The
> system is operational and XF86Config has gone through a progressive
> sequence of manual tuning to increase video performance.
The program which tunes paramters the best is xf86config (note the
way its spelt), its a text based program but will do far more than
most other configurators for X.
Save your old XF86Config file before running xf86config.
> My video card is built on to the main board and uses the 440EX chip set
> from Intel.
According to /usr/X11R6/lib/X11/Cards
NAME ATI integrated on Intel Maui MU440EX motherboard
SEE ATI Mach64 with Internal RAMDAC
>
> I currently have in the "graphics device section" of XF86Config the
> BoardName as "Unknown" and the chip set as "generic".
>
> Does anybody know how to set this to the 440 ED chip set or does anybody
> know where documentation may be obtained on how to set the chip set in
> the XF86Config file.
Its not the chipset you set its the video server, you can however
tune the video server by means of options, those options can be found
in the HOWTOs and README's.
/usr/X11R6/lib/X11/doc/*
>
> Thanks
> Frank
>
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
> the body of a message to [EMAIL PROTECTED]
> Please read the FAQ at http://www.linux-learn.org/faqs
--
Regards Richard
[EMAIL PROTECTED]
http://people.zeelandnet.nl/pa3gcu/
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.linux-learn.org/faqs
