On some NVDIMM servers, scrub operation will take long time to be finished as it start on all nvdimm buses in the system, add the bus-id parameter to do the scrub on the NFIT_TEST_BUS0
Signed-off-by: Yi Zhang <[email protected]> --- test/btt-errors.sh | 4 ++-- test/clear.sh | 2 +- test/inject-error.sh | 2 +- test/pfn-meta-errors.sh | 2 +- test/pmem-errors.sh | 2 +- 5 files changed, 6 insertions(+), 6 deletions(-) diff --git a/test/btt-errors.sh b/test/btt-errors.sh index cb35865..00c0796 100755 --- a/test/btt-errors.sh +++ b/test/btt-errors.sh @@ -115,7 +115,7 @@ bb_inj=$((dataoff/512)) # inject badblocks for one page at the start of the file $NDCTL inject-error --block="$bb_inj" --count=8 $dev -$NDCTL start-scrub && $NDCTL wait-scrub +$NDCTL start-scrub $NFIT_TEST_BUS0 && $NDCTL wait-scrub $NFIT_TEST_BUS0 force_raw 0 mount -o nodelalloc "/dev/$blockdev" $MNT @@ -149,7 +149,7 @@ map=$(hexdump -s 96 -n 4 "/dev/$raw_bdev" | head -1 | cut -d' ' -f2-) map=$(tr -d ' ' <<< "0x${map#* }${map%% *}") bb_inj=$((map/512)) $NDCTL inject-error --block="$bb_inj" --count=1 $dev -$NDCTL start-scrub && $NDCTL wait-scrub +$NDCTL start-scrub $NFIT_TEST_BUS0 && $NDCTL wait-scrub $NFIT_TEST_BUS0 force_raw 0 # make sure reading the first block of the namespace fails diff --git a/test/clear.sh b/test/clear.sh index 17d5bed..1bd12da 100755 --- a/test/clear.sh +++ b/test/clear.sh @@ -41,7 +41,7 @@ err_sector="$(((size/512) / 2))" err_count=8 if ! read sector len < /sys/block/$blockdev/badblocks; then $NDCTL inject-error --block="$err_sector" --count=$err_count $dev - $NDCTL start-scrub && $NDCTL wait-scrub + $NDCTL start-scrub $NFIT_TEST_BUS0 && $NDCTL wait-scrub $NFIT_TEST_BUS0 fi read sector len < /sys/block/$blockdev/badblocks [ $((sector * 2)) -ne $((size /512)) ] && echo "fail: $LINENO" && exit 1 diff --git a/test/inject-error.sh b/test/inject-error.sh index 49e68b3..825bf18 100755 --- a/test/inject-error.sh +++ b/test/inject-error.sh @@ -77,7 +77,7 @@ do_tests() # inject normally $NDCTL inject-error --block=$err_block --count=$err_count $dev - $NDCTL start-scrub && $NDCTL wait-scrub + $NDCTL start-scrub $NFIT_TEST_BUS0 && $NDCTL wait-scrub $NFIT_TEST_BUS0 check_status "$err_block" "$err_count" if read -r sector len < /sys/block/$blockdev/badblocks; then test "$sector" -eq "$err_block" diff --git a/test/pfn-meta-errors.sh b/test/pfn-meta-errors.sh index 2b57f19..14a15ae 100755 --- a/test/pfn-meta-errors.sh +++ b/test/pfn-meta-errors.sh @@ -61,7 +61,7 @@ mblk="$((metaoff/512))" # inject in the middle of the struct page area bb_inj=$(((dblk - mblk)/2)) $NDCTL inject-error --block="$bb_inj" --count=32 $dev -$NDCTL start-scrub && $NDCTL wait-scrub +$NDCTL start-scrub $NFIT_TEST_BUS0 && $NDCTL wait-scrub $NFIT_TEST_BUS0 # after probe from the enable-namespace, the error should've been cleared force_raw 0 diff --git a/test/pmem-errors.sh b/test/pmem-errors.sh index 9553a3f..3d90508 100755 --- a/test/pmem-errors.sh +++ b/test/pmem-errors.sh @@ -46,7 +46,7 @@ err_sector="$(((size/512) / 2))" err_count=8 if ! read sector len < /sys/block/$blockdev/badblocks; then $NDCTL inject-error --block="$err_sector" --count=$err_count $dev - $NDCTL start-scrub; $NDCTL wait-scrub + $NDCTL start-scrub $NFIT_TEST_BUS0; $NDCTL wait-scrub $NFIT_TEST_BUS0 fi read sector len < /sys/block/$blockdev/badblocks [ $((sector * 2)) -ne $((size /512)) ] && echo "fail: $LINENO" && false -- 2.21.0 _______________________________________________ Linux-nvdimm mailing list -- [email protected] To unsubscribe send an email to [email protected]
