Yi Zhang <[email protected]> writes: > On some NVDIMM servers, scrub operation will take long time to be finished > as it start on all nvdimm buses in the system, add the bus-id parameter to > do the scrub on the NFIT_TEST_BUS0 > > Signed-off-by: Yi Zhang <[email protected]>
Reviewed-by: Jeff Moyer <[email protected]> > --- > test/btt-errors.sh | 4 ++-- > test/clear.sh | 2 +- > test/inject-error.sh | 2 +- > test/pfn-meta-errors.sh | 2 +- > test/pmem-errors.sh | 2 +- > 5 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/test/btt-errors.sh b/test/btt-errors.sh > index cb35865..00c0796 100755 > --- a/test/btt-errors.sh > +++ b/test/btt-errors.sh > @@ -115,7 +115,7 @@ bb_inj=$((dataoff/512)) > > # inject badblocks for one page at the start of the file > $NDCTL inject-error --block="$bb_inj" --count=8 $dev > -$NDCTL start-scrub && $NDCTL wait-scrub > +$NDCTL start-scrub $NFIT_TEST_BUS0 && $NDCTL wait-scrub $NFIT_TEST_BUS0 > > force_raw 0 > mount -o nodelalloc "/dev/$blockdev" $MNT > @@ -149,7 +149,7 @@ map=$(hexdump -s 96 -n 4 "/dev/$raw_bdev" | head -1 | cut > -d' ' -f2-) > map=$(tr -d ' ' <<< "0x${map#* }${map%% *}") > bb_inj=$((map/512)) > $NDCTL inject-error --block="$bb_inj" --count=1 $dev > -$NDCTL start-scrub && $NDCTL wait-scrub > +$NDCTL start-scrub $NFIT_TEST_BUS0 && $NDCTL wait-scrub $NFIT_TEST_BUS0 > force_raw 0 > > # make sure reading the first block of the namespace fails > diff --git a/test/clear.sh b/test/clear.sh > index 17d5bed..1bd12da 100755 > --- a/test/clear.sh > +++ b/test/clear.sh > @@ -41,7 +41,7 @@ err_sector="$(((size/512) / 2))" > err_count=8 > if ! read sector len < /sys/block/$blockdev/badblocks; then > $NDCTL inject-error --block="$err_sector" --count=$err_count $dev > - $NDCTL start-scrub && $NDCTL wait-scrub > + $NDCTL start-scrub $NFIT_TEST_BUS0 && $NDCTL wait-scrub $NFIT_TEST_BUS0 > fi > read sector len < /sys/block/$blockdev/badblocks > [ $((sector * 2)) -ne $((size /512)) ] && echo "fail: $LINENO" && exit 1 > diff --git a/test/inject-error.sh b/test/inject-error.sh > index 49e68b3..825bf18 100755 > --- a/test/inject-error.sh > +++ b/test/inject-error.sh > @@ -77,7 +77,7 @@ do_tests() > > # inject normally > $NDCTL inject-error --block=$err_block --count=$err_count $dev > - $NDCTL start-scrub && $NDCTL wait-scrub > + $NDCTL start-scrub $NFIT_TEST_BUS0 && $NDCTL wait-scrub $NFIT_TEST_BUS0 > check_status "$err_block" "$err_count" > if read -r sector len < /sys/block/$blockdev/badblocks; then > test "$sector" -eq "$err_block" > diff --git a/test/pfn-meta-errors.sh b/test/pfn-meta-errors.sh > index 2b57f19..14a15ae 100755 > --- a/test/pfn-meta-errors.sh > +++ b/test/pfn-meta-errors.sh > @@ -61,7 +61,7 @@ mblk="$((metaoff/512))" > # inject in the middle of the struct page area > bb_inj=$(((dblk - mblk)/2)) > $NDCTL inject-error --block="$bb_inj" --count=32 $dev > -$NDCTL start-scrub && $NDCTL wait-scrub > +$NDCTL start-scrub $NFIT_TEST_BUS0 && $NDCTL wait-scrub $NFIT_TEST_BUS0 > > # after probe from the enable-namespace, the error should've been cleared > force_raw 0 > diff --git a/test/pmem-errors.sh b/test/pmem-errors.sh > index 9553a3f..3d90508 100755 > --- a/test/pmem-errors.sh > +++ b/test/pmem-errors.sh > @@ -46,7 +46,7 @@ err_sector="$(((size/512) / 2))" > err_count=8 > if ! read sector len < /sys/block/$blockdev/badblocks; then > $NDCTL inject-error --block="$err_sector" --count=$err_count $dev > - $NDCTL start-scrub; $NDCTL wait-scrub > + $NDCTL start-scrub $NFIT_TEST_BUS0; $NDCTL wait-scrub $NFIT_TEST_BUS0 > fi > read sector len < /sys/block/$blockdev/badblocks > [ $((sector * 2)) -ne $((size /512)) ] && echo "fail: $LINENO" && false _______________________________________________ Linux-nvdimm mailing list -- [email protected] To unsubscribe send an email to [email protected]
