* Carlos Aguiar <[EMAIL PROTECTED]> [080418 13:33]:
> From: Carlos Eduardo Aguiar <[EMAIL PROTECTED]>
>
> This patch makes arch/arm/mach-omap2/board-sdp-hsmmc.c file to use macros
> instead of some magic constants.
Pushing.
Tony
> Signed-off-by: Carlos Eduardo Aguiar <[EMAIL PROTECTED]>
> Signed-off-by: Francisco Alecrim <[EMAIL PROTECTED]>
> Acked-by: Anderson Lizardo <[EMAIL PROTECTED]>
> Acked-by: Eduardo Valentin <[EMAIL PROTECTED]>
> ---
> arch/arm/mach-omap2/board-sdp-hsmmc.c | 55 +++++++++++++++++++++++---------
> 1 files changed, 39 insertions(+), 16 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-sdp-hsmmc.c
> b/arch/arm/mach-omap2/board-sdp-hsmmc.c
> index 355c1c0..d21af87 100644
> --- a/arch/arm/mach-omap2/board-sdp-hsmmc.c
> +++ b/arch/arm/mach-omap2/board-sdp-hsmmc.c
> @@ -35,6 +35,16 @@
> #define MMC1_CD_IRQ 0
> #define MMC2_CD_IRQ 1
>
> +#define OMAP2_CONTROL_DEVCONF0 0x48002274
> +#define OMAP2_CONTROL_DEVCONF1 0x490022E8
> +
> +#define OMAP2_CONTROL_DEVCONF0_LBCLK (1 << 24)
> +#define OMAP2_CONTROL_DEVCONF1_ACTOV (1 << 31)
> +
> +#define OMAP2_CONTROL_PBIAS_VMODE (1 << 0)
> +#define OMAP2_CONTROL_PBIAS_PWRDNZ (1 << 1)
> +#define OMAP2_CONTROL_PBIAS_SCTRL (1 << 2)
> +
> static int sdp_mmc_card_detect(int irq)
> {
> return twl4030_get_gpio_datain(irq - IH_TWL4030_GPIO_BASE);
> @@ -158,32 +168,36 @@ static int sdp_mmc_set_power(struct device *dev, int
> slot, int power_on,
>
> if (power_on) {
> if (cpu_is_omap24xx())
> - devconf = omap_readl(0x490022E8);
> + devconf = omap_readl(OMAP2_CONTROL_DEVCONF1);
> else
> - devconf = omap_readl(0x48002274);
> + devconf = omap_readl(OMAP2_CONTROL_DEVCONF0);
>
> switch (1 << vdd) {
> case MMC_VDD_33_34:
> case MMC_VDD_32_33:
> vdd_sel = VSEL_3V;
> if (cpu_is_omap24xx())
> - devconf = (devconf | (1 << 31));
> + devconf |= OMAP2_CONTROL_DEVCONF1_ACTOV;
> break;
> case MMC_VDD_165_195:
> vdd_sel = VSEL_18V;
> if (cpu_is_omap24xx())
> - devconf = (devconf & ~(1 << 31));
> + devconf &= ~OMAP2_CONTROL_DEVCONF1_ACTOV;
> }
>
> if (cpu_is_omap24xx())
> - omap_writel(devconf, 0x490022E8);
> + omap_writel(devconf, OMAP2_CONTROL_DEVCONF1);
> else
> - omap_writel(devconf | 1 << 24, 0x48002274);
> + omap_writel(devconf | OMAP2_CONTROL_DEVCONF0_LBCLK,
> + OMAP2_CONTROL_DEVCONF0);
>
> - omap_writel(omap_readl(OMAP2_CONTROL_PBIAS) | 1 << 2,
> - OMAP2_CONTROL_PBIAS);
> - omap_writel(omap_readl(OMAP2_CONTROL_PBIAS) & ~(1 << 1),
> - OMAP2_CONTROL_PBIAS);
> + reg = omap_readl(OMAP2_CONTROL_PBIAS);
> + reg |= OMAP2_CONTROL_PBIAS_SCTRL;
> + omap_writel(reg, OMAP2_CONTROL_PBIAS);
> +
> + reg = omap_readl(OMAP2_CONTROL_PBIAS);
> + reg &= ~OMAP2_CONTROL_PBIAS_PWRDNZ;
> + omap_writel(reg, OMAP2_CONTROL_PBIAS);
>
> ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
> P1_DEV_GRP, VMMC1_DEV_GRP);
> @@ -197,8 +211,12 @@ static int sdp_mmc_set_power(struct device *dev, int
> slot, int power_on,
>
> msleep(100);
> reg = omap_readl(OMAP2_CONTROL_PBIAS);
> - reg = (vdd_sel == VSEL_18V) ? ((reg | 0x6) & ~0x1)
> - : (reg | 0x7);
> + reg |= (OMAP2_CONTROL_PBIAS_SCTRL |
> + OMAP2_CONTROL_PBIAS_PWRDNZ);
> + if (vdd_sel == VSEL_18V)
> + reg &= ~OMAP2_CONTROL_PBIAS_VMODE;
> + else
> + reg |= OMAP2_CONTROL_PBIAS_VMODE;
> omap_writel(reg, OMAP2_CONTROL_PBIAS);
>
> return ret;
> @@ -207,8 +225,10 @@ static int sdp_mmc_set_power(struct device *dev, int
> slot, int power_on,
> /* Power OFF */
>
> /* For MMC1, Toggle PBIAS before every power up sequence */
> - omap_writel(omap_readl(OMAP2_CONTROL_PBIAS) & ~(1 << 1),
> - OMAP2_CONTROL_PBIAS);
> + reg = omap_readl(OMAP2_CONTROL_PBIAS);
> + reg &= ~OMAP2_CONTROL_PBIAS_PWRDNZ;
> + omap_writel(reg, OMAP2_CONTROL_PBIAS);
> +
> ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
> LDO_CLR, VMMC1_DEV_GRP);
> if (ret)
> @@ -221,8 +241,11 @@ static int sdp_mmc_set_power(struct device *dev, int
> slot, int power_on,
>
> /* 100ms delay required for PBIAS configuration */
> msleep(100);
> - omap_writel(omap_readl(OMAP2_CONTROL_PBIAS) | 0x7,
> - OMAP2_CONTROL_PBIAS);
> + reg = omap_readl(OMAP2_CONTROL_PBIAS);
> + reg |= (OMAP2_CONTROL_PBIAS_VMODE |
> + OMAP2_CONTROL_PBIAS_PWRDNZ |
> + OMAP2_CONTROL_PBIAS_SCTRL);
> + omap_writel(reg, OMAP2_CONTROL_PBIAS);
> }
>
> return 0;
> -- 1.5.3.GIT
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
