Hi,
This patch is if i do not build with CONFIG_TOUCHSCREEN_TSC2005 enabled.
I am trying to build a bare basics kernel for the n800, and it seems
that arch/arm/mach-omap2/board-n800.c could do with some rearrangement
to not declare/use structures for devices not present in a n800 and
vice versa for the n810.
Im fairly newb, but could have a go at it, if it is deemed a good use of time.
Cheers
On Sun, May 25, 2008 at 10:45 AM, <[EMAIL PROTECTED]> wrote:
>
> Signed-off-by: Nick Loeve <[EMAIL PROTECTED]>
> ---
> arch/arm/mach-omap2/board-n800.c | 2 --
> 1 files changed, 0 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-n800.c
> b/arch/arm/mach-omap2/board-n800.c
> index ae85c2c..f902482 100644
> --- a/arch/arm/mach-omap2/board-n800.c
> +++ b/arch/arm/mach-omap2/board-n800.c
> @@ -372,7 +372,6 @@ static struct omap2_mcspi_device_config
> cx3110x_mcspi_config = {
> .single_channel = 1,
> };
>
> -#ifdef CONFIG_TOUCHSCREEN_TSC2005
> static struct tsc2005_platform_data tsc2005_config = {
> .reset_gpio = 94,
> .dav_gpio = 106
> @@ -382,7 +381,6 @@ static struct omap2_mcspi_device_config
> tsc2005_mcspi_config = {
> .turbo_mode = 0,
> .single_channel = 1,
> };
> -#endif
>
> static struct spi_board_info n800_spi_board_info[] __initdata = {
> {
> --
> 1.5.5.1
>
>
--
Nick Loeve
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
