> PowerTOP version 1.10      (C) 2007 Intel Corporation
>
> Cn                Avg residency       P-states (frequencies)
> C0 (cpu running)        ( 0.0%)
> C0                0.0ms ( 0.0%)
> C1              188.9ms (0.7%)*
> C2              2036.1ms (8.0%)*
> C3              23285.1ms (91.3%)*
>
> Wakeups-from-idle per second : 61.7     interval: 3.0s
>
> Top causes for wakeups:
>    44.9% ( 57.7)       <interrupt> : musb_hdrc.0
>    17.9% ( 23.0)       <interrupt> : gp timer
>    14.3% ( 18.3)   USB device 2-1.2 : LCD2USB Interface (Till Harbaum)
>     9.9% ( 12.7)         lcd4linux : do_nanosleep (hrtimer_wakeup)
>     7.5% (  9.7)   USB device 2-1.4 : Linksys USB2.0 Network Adapter
> (USB)
>     3.9% (  5.0)            Xfbdev : fbcon_add_cursor_timer
> (cursor_timer_handler)
>     0.5% (  0.7)              hald : schedule_timeout (process_timeout)
>     0.3% (  0.3)          dropbear : sk_reset_timer (tcp_write_timer)
>     0.3% (  0.3)     <kernel core> : neigh_table_init_no_netlink
> (neigh_periodic_timer)
>     0.3% (  0.3)        pulseaudio : schedule_timeout (process_timeout)
>     0.3% (  0.3)              init : schedule_timeout (process_timeout)
>
> The dispc crashes are gone and I get fewer wakeups per second :)
>
> regards,
>
> Koen
>
>
> * There's a bug in powertop 1.10 that reports percentages wrong, so
> the percentages  where approximated by hand.
>
> C0 (cpu running)        ( 0.0%)
> C0                0.0ms ( 0.0%)
> C1              176.5ms ( 4.7%)
> C2              3601.7ms (4090.7%)
> C3              17956.3ms (92938.0%)

Those C-State residency times are clearly wrong also.

If you try hard with a minimal kernel the maximum sleep you can get is like 1.5 
seconds.  The kernel has some hard coded timers with 1 to 2 second periods 
(like slab cache reaper threads).

For our non-edge kernel code these things report about right.  As long as you 
have a 99.9% duty cycle of OFF to ON you get pretty good savings.

The wake up information should be about right.  Your USB Networking with MUSB 
will probably assure you of never getting ultra low power numbers but probably 
good for development.

What is that USB2LCD device?



Regards,
Richard W.


--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to