Remove usbhost_sar_fclk from the OMAP3 clock framework.  The bit that
the clock was tweaking doesn't actually enable or disable a clock; it
controls whether the hardware will save and restore USBHOST state
when the powerdomain changes state.  (That happens to coincidentally
enable a clock for the duration of the operation, hence the earlier
confusion.)

In place of the clock, mark the USBHOST powerdomain as supporting
hardware save-and-restore functionality.

Signed-off-by: Paul Walmsley <[EMAIL PROTECTED]>
---

 arch/arm/mach-omap2/clock34xx.h        |   12 ------------
 arch/arm/mach-omap2/powerdomains34xx.h |    1 +
 2 files changed, 1 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index b4dceea..2140463 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -2231,17 +2231,6 @@ static struct clk usbhost_ick = {
        .recalc         = &followparent_recalc,
 };
 
-static struct clk usbhost_sar_fck = {
-       .name           = "usbhost_sar_fck",
-       .parent         = &osc_sys_ck,
-       .init           = &omap2_init_clk_clkdm,
-       .enable_reg     = OMAP34XX_PRM_REGADDR(OMAP3430ES2_USBHOST_MOD, 
PM_PWSTCTRL),
-       .enable_bit     = OMAP3430ES2_SAVEANDRESTORE_SHIFT,
-       .flags          = CLOCK_IN_OMAP3430ES2,
-       .clkdm_name     = "usbhost_clkdm",
-       .recalc         = &followparent_recalc,
-};
-
 /* WKUP */
 
 static const struct clksel_rate usim_96m_rates[] = {
@@ -3189,7 +3178,6 @@ static struct clk *onchip_34xx_clks[] __initdata = {
        &usbhost_120m_fck,
        &usbhost_48m_fck,
        &usbhost_ick,
-       &usbhost_sar_fck,
        &usim_fck,
        &gpt1_fck,
        &wkup_32k_fck,
diff --git a/arch/arm/mach-omap2/powerdomains34xx.h 
b/arch/arm/mach-omap2/powerdomains34xx.h
index 1e1146a..88f85ea 100644
--- a/arch/arm/mach-omap2/powerdomains34xx.h
+++ b/arch/arm/mach-omap2/powerdomains34xx.h
@@ -312,6 +312,7 @@ static struct powerdomain usbhost_pwrdm = {
        .sleepdep_srcs    = dss_per_usbhost_sleepdeps,
        .pwrsts           = PWRSTS_OFF_RET_ON,
        .pwrsts_logic_ret = PWRDM_POWER_RET,
+       .flags            = PWRDM_HAS_HDWR_SAR, /* for USBHOST ctrlr only */
        .banks            = 1,
        .pwrsts_mem_ret   = {
                [0] = PWRDM_POWER_RET, /* MEMRETSTATE */


--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to