twl_init_irq() prints error messages and returns if any interrupt mask
register writes fail. Change this to generate a warning traceback and
to continue execution rather than skipping TWL init. (These mask
writes should not fail at all unless either the I2C bus or the TWL4030
is somehow wedged.)
Signed-off-by: Paul Walmsley <[EMAIL PROTECTED]>
---
drivers/i2c/chips/twl4030-core.c | 100 +++++++-------------------------------
1 files changed, 18 insertions(+), 82 deletions(-)
diff --git a/drivers/i2c/chips/twl4030-core.c b/drivers/i2c/chips/twl4030-core.c
index 615fb84..1906635 100644
--- a/drivers/i2c/chips/twl4030-core.c
+++ b/drivers/i2c/chips/twl4030-core.c
@@ -749,18 +749,10 @@ static void twl_init_irq(void)
*/
/* PWR_IMR1 */
- res = twl4030_i2c_write_u8(TWL4030_MODULE_INT, 0xFF, 0x1);
- if (res < 0) {
- pr_err("%s[%d][%d]\n", msg, res, __LINE__);
- return;
- }
+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_INT, 0xff, 0x1) < 0);
/* PWR_IMR2 */
- res = twl4030_i2c_write_u8(TWL4030_MODULE_INT, 0xFF, 0x3);
- if (res < 0) {
- pr_err("%s[%d][%d]\n", msg, res, __LINE__);
- return;
- }
+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_INT, 0xff, 0x3) < 0);
/* Clear off any other pending interrupts on power */
/* PWR_ISR1 */
@@ -772,32 +764,16 @@ static void twl_init_irq(void)
/* Slave address 0x4A */
/* BCIIMR1A */
- res = twl4030_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xFF, 0x2);
- if (res < 0) {
- pr_err("%s[%d][%d]\n", msg, res, __LINE__);
- return;
- }
+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff, 0x2) < 0);
- /* BCIIMR2A */
- res = twl4030_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xFF, 0x3);
- if (res < 0) {
- pr_err("%s[%d][%d]\n", msg, res, __LINE__);
- return;
- }
+ /* BCIIMR2A */
+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff, 0x3) < 0);
- /* BCIIMR1B */
- res = twl4030_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xFF, 0x6);
- if (res < 0) {
- pr_err("%s[%d][%d]\n", msg, res, __LINE__);
- return;
- }
+ /* BCIIMR2A */
+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff, 0x6) < 0);
/* BCIIMR2B */
- res = twl4030_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xFF, 0x7);
- if (res < 0) {
- pr_err("%s[%d][%d]\n", msg, res, __LINE__);
- return;
- }
+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff, 0x7) < 0);
/* BCIISR1A */
WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_INTERRUPTS, 0x0) < 0);
@@ -813,18 +789,10 @@ static void twl_init_irq(void)
/* MAD C */
/* MADC_IMR1 */
- res = twl4030_i2c_write_u8(TWL4030_MODULE_MADC, 0xFF, 0x62);
- if (res < 0) {
- pr_err("%s[%d][%d]\n", msg, res, __LINE__);
- return;
- }
+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_MADC, 0xff, 0x62) < 0);
/* MADC_IMR2 */
- res = twl4030_i2c_write_u8(TWL4030_MODULE_MADC, 0xFF, 0x64);
- if (res < 0) {
- pr_err("%s[%d][%d]\n", msg, res, __LINE__);
- return;
- }
+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_MADC, 0xff, 0x64) < 0);
/* MADC_ISR1 */
WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_MADC, 0x61) < 0);
@@ -834,68 +802,36 @@ static void twl_init_irq(void)
/* key Pad */
/* KEYPAD - IMR1 */
- res = twl4030_i2c_write_u8(TWL4030_MODULE_KEYPAD, 0xFF, (0x12));
- if (res < 0) {
- pr_err("%s[%d][%d]\n", msg, res, __LINE__);
- return;
- }
+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_KEYPAD, 0xff, 0x12) < 0);
/* KEYPAD - ISR1 */
/* XXX does this still need to be done twice for some reason? */
WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_KEYPAD, 0x11) < 0);
/* KEYPAD - IMR2 */
- res = twl4030_i2c_write_u8(TWL4030_MODULE_KEYPAD, 0xFF, (0x14));
- if (res < 0) {
- pr_err("%s[%d][%d]\n", msg, res, __LINE__);
- return;
- }
+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_KEYPAD, 0xff, 0x14) < 0);
/* KEYPAD - ISR2 */
WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_KEYPAD, 0x13) < 0);
/* Slave address 0x49 */
/* GPIO_IMR1A */
- res = twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xFF, (0x1C));
- if (res < 0) {
- pr_err("%s[%d][%d]\n", msg, res, __LINE__);
- return;
- }
+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xff, 0x1c) < 0);
/* GPIO_IMR2A */
- res = twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xFF, (0x1D));
- if (res < 0) {
- pr_err("%s[%d][%d]\n", msg, res, __LINE__);
- return;
- }
+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xff, 0x1d) < 0);
/* GPIO_IMR3A */
- res = twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xFF, (0x1E));
- if (res < 0) {
- pr_err("%s[%d][%d]\n", msg, res, __LINE__);
- return;
- }
+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xff, 0x1e) < 0);
/* GPIO_IMR1B */
- res = twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xFF, (0x22));
- if (res < 0) {
- pr_err("%s[%d][%d]\n", msg, res, __LINE__);
- return;
- }
+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xff, 0x22) < 0);
/* GPIO_IMR2B */
- res = twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xFF, (0x23));
- if (res < 0) {
- pr_err("%s[%d][%d]\n", msg, res, __LINE__);
- return;
- }
+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xff, 0x23) < 0);
/* GPIO_IMR3B */
- res = twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xFF, (0x24));
- if (res < 0) {
- pr_err("%s[%d][%d]\n", msg, res, __LINE__);
- return;
- }
+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xff, 0x24) < 0);
/* GPIO_ISR1A */
WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_GPIO, 0x19) < 0);
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
